BROŽEK, Milan . The Turning of Overlays Using Tools Produced by the Company Walter. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 48, n.9, p. 501-515, july 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/the-turning-of-overlays-using-tools-produced-by-the-company-walter/>. Date accessed: 20 dec. 2024. doi:http://dx.doi.org/.
Brožek, M. (2002). The Turning of Overlays Using Tools Produced by the Company Walter. Strojniški vestnik - Journal of Mechanical Engineering, 48(9), 501-515. doi:http://dx.doi.org/
@article{.,
author = {Milan Brožek},
title = {The Turning of Overlays Using Tools Produced by the Company Walter},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {48},
number = {9},
year = {2002},
keywords = {surface roughness; overlays turning; inserts; cutting conditions; },
abstract = {Surfacing technology is used to produce layers with special properties for new parts or worn out functional surfaces. For many parts it is necessary to machine them to fulfill the requirements for shape, size and roughness. But the machining of overlays is, in comparison with the machining of drawn or rolled semiproducts, specialized. Usually, the optimization of the cutting conditions comes from long-term tool-life test results. For these tests we have experimentally determined time dependences of tool wear at different cutting speeds for every combination of overlay and cutting materials. These dependences are the basis for the determination of the relationship between tool-life and cutting speed for the limit of tool wear. The relationships between cutting speed and tool-life determined in this way are the initial values for ones own optimization of the cutting conditions. It is usual for the optimum to be determined for the minimum machining costs criterion. In the calculation all the economic indexes of the workshop are included. Measuring of the overlay hardness, HRC, and the overlay surface roughness, Ra and Rt , after machining was also part of the tests. In this article we publish the results of long-term tool-life tests, made during the turning of an overlay made by welding wire C 508 using a tool from the firm Walter. In the tests we used six types of tool material in the form of inserts. Three of them can be recommend for the turning of this overlay. The best results were achieved using the WNMG 080412 WTA 13 (HC K 10) insert. During the tests we found that the roughness of the turned surface slowly increases and that extensive deterioration occurs at the end of the tool-life.},
issn = {0039-2480}, pages = {501-515}, doi = {},
url = {https://www.sv-jme.eu/sl/article/the-turning-of-overlays-using-tools-produced-by-the-company-walter/}
}
Brožek, M. 2002 July 48. The Turning of Overlays Using Tools Produced by the Company Walter. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 48:9
%A Brožek, Milan %D 2002 %T The Turning of Overlays Using Tools Produced by the Company Walter %B 2002 %9 surface roughness; overlays turning; inserts; cutting conditions; %! The Turning of Overlays Using Tools Produced by the Company Walter %K surface roughness; overlays turning; inserts; cutting conditions; %X Surfacing technology is used to produce layers with special properties for new parts or worn out functional surfaces. For many parts it is necessary to machine them to fulfill the requirements for shape, size and roughness. But the machining of overlays is, in comparison with the machining of drawn or rolled semiproducts, specialized. Usually, the optimization of the cutting conditions comes from long-term tool-life test results. For these tests we have experimentally determined time dependences of tool wear at different cutting speeds for every combination of overlay and cutting materials. These dependences are the basis for the determination of the relationship between tool-life and cutting speed for the limit of tool wear. The relationships between cutting speed and tool-life determined in this way are the initial values for ones own optimization of the cutting conditions. It is usual for the optimum to be determined for the minimum machining costs criterion. In the calculation all the economic indexes of the workshop are included. Measuring of the overlay hardness, HRC, and the overlay surface roughness, Ra and Rt , after machining was also part of the tests. In this article we publish the results of long-term tool-life tests, made during the turning of an overlay made by welding wire C 508 using a tool from the firm Walter. In the tests we used six types of tool material in the form of inserts. Three of them can be recommend for the turning of this overlay. The best results were achieved using the WNMG 080412 WTA 13 (HC K 10) insert. During the tests we found that the roughness of the turned surface slowly increases and that extensive deterioration occurs at the end of the tool-life. %U https://www.sv-jme.eu/sl/article/the-turning-of-overlays-using-tools-produced-by-the-company-walter/ %0 Journal Article %R %& 501 %P 15 %J Strojniški vestnik - Journal of Mechanical Engineering %V 48 %N 9 %@ 0039-2480 %8 2017-07-07 %7 2017-07-07
Brožek, Milan. "The Turning of Overlays Using Tools Produced by the Company Walter." Strojniški vestnik - Journal of Mechanical Engineering [Online], 48.9 (2002): 501-515. Web. 20 Dec. 2024
TY - JOUR AU - Brožek, Milan PY - 2002 TI - The Turning of Overlays Using Tools Produced by the Company Walter JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - surface roughness; overlays turning; inserts; cutting conditions; N2 - Surfacing technology is used to produce layers with special properties for new parts or worn out functional surfaces. For many parts it is necessary to machine them to fulfill the requirements for shape, size and roughness. But the machining of overlays is, in comparison with the machining of drawn or rolled semiproducts, specialized. Usually, the optimization of the cutting conditions comes from long-term tool-life test results. For these tests we have experimentally determined time dependences of tool wear at different cutting speeds for every combination of overlay and cutting materials. These dependences are the basis for the determination of the relationship between tool-life and cutting speed for the limit of tool wear. The relationships between cutting speed and tool-life determined in this way are the initial values for ones own optimization of the cutting conditions. It is usual for the optimum to be determined for the minimum machining costs criterion. In the calculation all the economic indexes of the workshop are included. Measuring of the overlay hardness, HRC, and the overlay surface roughness, Ra and Rt , after machining was also part of the tests. In this article we publish the results of long-term tool-life tests, made during the turning of an overlay made by welding wire C 508 using a tool from the firm Walter. In the tests we used six types of tool material in the form of inserts. Three of them can be recommend for the turning of this overlay. The best results were achieved using the WNMG 080412 WTA 13 (HC K 10) insert. During the tests we found that the roughness of the turned surface slowly increases and that extensive deterioration occurs at the end of the tool-life. UR - https://www.sv-jme.eu/sl/article/the-turning-of-overlays-using-tools-produced-by-the-company-walter/
@article{{}{.},
author = {Brožek, M.},
title = {The Turning of Overlays Using Tools Produced by the Company Walter},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {48},
number = {9},
year = {2002},
doi = {},
url = {https://www.sv-jme.eu/sl/article/the-turning-of-overlays-using-tools-produced-by-the-company-walter/}
}
TY - JOUR AU - Brožek, Milan PY - 2017/07/07 TI - The Turning of Overlays Using Tools Produced by the Company Walter JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 48, No 9 (2002): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - surface roughness, overlays turning, inserts, cutting conditions, N2 - Surfacing technology is used to produce layers with special properties for new parts or worn out functional surfaces. For many parts it is necessary to machine them to fulfill the requirements for shape, size and roughness. But the machining of overlays is, in comparison with the machining of drawn or rolled semiproducts, specialized. Usually, the optimization of the cutting conditions comes from long-term tool-life test results. For these tests we have experimentally determined time dependences of tool wear at different cutting speeds for every combination of overlay and cutting materials. These dependences are the basis for the determination of the relationship between tool-life and cutting speed for the limit of tool wear. The relationships between cutting speed and tool-life determined in this way are the initial values for ones own optimization of the cutting conditions. It is usual for the optimum to be determined for the minimum machining costs criterion. In the calculation all the economic indexes of the workshop are included. Measuring of the overlay hardness, HRC, and the overlay surface roughness, Ra and Rt , after machining was also part of the tests. In this article we publish the results of long-term tool-life tests, made during the turning of an overlay made by welding wire C 508 using a tool from the firm Walter. In the tests we used six types of tool material in the form of inserts. Three of them can be recommend for the turning of this overlay. The best results were achieved using the WNMG 080412 WTA 13 (HC K 10) insert. During the tests we found that the roughness of the turned surface slowly increases and that extensive deterioration occurs at the end of the tool-life. UR - https://www.sv-jme.eu/sl/article/the-turning-of-overlays-using-tools-produced-by-the-company-walter/
Brožek, Milan"The Turning of Overlays Using Tools Produced by the Company Walter" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 48 Number 9 (07 July 2017)
Strojniški vestnik - Journal of Mechanical Engineering 48(2002)9, 501-515
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
Surfacing technology is used to produce layers with special properties for new parts or worn out functional surfaces. For many parts it is necessary to machine them to fulfill the requirements for shape, size and roughness. But the machining of overlays is, in comparison with the machining of drawn or rolled semiproducts, specialized. Usually, the optimization of the cutting conditions comes from long-term tool-life test results. For these tests we have experimentally determined time dependences of tool wear at different cutting speeds for every combination of overlay and cutting materials. These dependences are the basis for the determination of the relationship between tool-life and cutting speed for the limit of tool wear. The relationships between cutting speed and tool-life determined in this way are the initial values for ones own optimization of the cutting conditions. It is usual for the optimum to be determined for the minimum machining costs criterion. In the calculation all the economic indexes of the workshop are included. Measuring of the overlay hardness, HRC, and the overlay surface roughness, Ra and Rt , after machining was also part of the tests. In this article we publish the results of long-term tool-life tests, made during the turning of an overlay made by welding wire C 508 using a tool from the firm Walter. In the tests we used six types of tool material in the form of inserts. Three of them can be recommend for the turning of this overlay. The best results were achieved using the WNMG 080412 WTA 13 (HC K 10) insert. During the tests we found that the roughness of the turned surface slowly increases and that extensive deterioration occurs at the end of the tool-life.