TUŠEK, Janez ;LEŠNJAK, Andrej ;ZORC, Borut ;ZORKO, Jože ;KROŠELJ, Franc . The Role of Welding in the Manufacture of the Steam Generators for the Krško Nuclear Power Plant. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 46, n.3, p. 162-180, july 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/the-role-of-welding-in-the-manufacture-of-the-steam-generators-for-the-krsko-nuclear-power-plant/>. Date accessed: 20 dec. 2024. doi:http://dx.doi.org/.
Tušek, J., Lešnjak, A., Zorc, B., Zorko, J., & Krošelj, F. (2000). The Role of Welding in the Manufacture of the Steam Generators for the Krško Nuclear Power Plant. Strojniški vestnik - Journal of Mechanical Engineering, 46(3), 162-180. doi:http://dx.doi.org/
@article{.,
author = {Janez Tušek and Andrej Lešnjak and Borut Zorc and Jože Zorko and Franc Krošelj},
title = {The Role of Welding in the Manufacture of the Steam Generators for the Krško Nuclear Power Plant},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {46},
number = {3},
year = {2000},
keywords = {nucelar power engineering; steam generators; submerged-arc cladding; TIG welding; },
abstract = {This paper describes welding and cladding technologies used in the manufacture of the steam generators for the Krško Nuclear Power Plant. The most important welded joints and claddings are treated, however, all the welded joints and claddings could not be treated because there are around 60.000 in each steam generator. First, cladding of the inner surface of the primary head of the steam generator is described. Submerged-arc cladding with a strip electrode was used for this purpose. Then the production of the welded joints between a tube and a tube sheet is described. All 5428 tubes were joined to the tube sheet, at each end, by TIG welding, preceded by mechanical rolling-in and hydraulic expansion. Welding of a partition plate to the primary head and to the tube sheet is described in the third part of the paper. Both welded joints, i.e. the one between the partition plate and the tube sheet and the one between the partition plate and the primary head, are shown as macro sections. Finally, welding of circumferential welds at the steam-generator shell is described. Two different arc welding processes were used for the purpose. The weld root was manually arc welded with a covered electrode while other welds were automatically submerged-arc welded. In the conclusions, it is stated that the welding technologies used were selected properly and well controlled during execution, which ensured the quality of the steam generator},
issn = {0039-2480}, pages = {162-180}, doi = {},
url = {https://www.sv-jme.eu/sl/article/the-role-of-welding-in-the-manufacture-of-the-steam-generators-for-the-krsko-nuclear-power-plant/}
}
Tušek, J.,Lešnjak, A.,Zorc, B.,Zorko, J.,Krošelj, F. 2000 July 46. The Role of Welding in the Manufacture of the Steam Generators for the Krško Nuclear Power Plant. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 46:3
%A Tušek, Janez %A Lešnjak, Andrej %A Zorc, Borut %A Zorko, Jože %A Krošelj, Franc %D 2000 %T The Role of Welding in the Manufacture of the Steam Generators for the Krško Nuclear Power Plant %B 2000 %9 nucelar power engineering; steam generators; submerged-arc cladding; TIG welding; %! The Role of Welding in the Manufacture of the Steam Generators for the Krško Nuclear Power Plant %K nucelar power engineering; steam generators; submerged-arc cladding; TIG welding; %X This paper describes welding and cladding technologies used in the manufacture of the steam generators for the Krško Nuclear Power Plant. The most important welded joints and claddings are treated, however, all the welded joints and claddings could not be treated because there are around 60.000 in each steam generator. First, cladding of the inner surface of the primary head of the steam generator is described. Submerged-arc cladding with a strip electrode was used for this purpose. Then the production of the welded joints between a tube and a tube sheet is described. All 5428 tubes were joined to the tube sheet, at each end, by TIG welding, preceded by mechanical rolling-in and hydraulic expansion. Welding of a partition plate to the primary head and to the tube sheet is described in the third part of the paper. Both welded joints, i.e. the one between the partition plate and the tube sheet and the one between the partition plate and the primary head, are shown as macro sections. Finally, welding of circumferential welds at the steam-generator shell is described. Two different arc welding processes were used for the purpose. The weld root was manually arc welded with a covered electrode while other welds were automatically submerged-arc welded. In the conclusions, it is stated that the welding technologies used were selected properly and well controlled during execution, which ensured the quality of the steam generator %U https://www.sv-jme.eu/sl/article/the-role-of-welding-in-the-manufacture-of-the-steam-generators-for-the-krsko-nuclear-power-plant/ %0 Journal Article %R %& 162 %P 19 %J Strojniški vestnik - Journal of Mechanical Engineering %V 46 %N 3 %@ 0039-2480 %8 2017-07-07 %7 2017-07-07
Tušek, Janez, Andrej Lešnjak, Borut Zorc, Jože Zorko, & Franc Krošelj. "The Role of Welding in the Manufacture of the Steam Generators for the Krško Nuclear Power Plant." Strojniški vestnik - Journal of Mechanical Engineering [Online], 46.3 (2000): 162-180. Web. 20 Dec. 2024
TY - JOUR AU - Tušek, Janez AU - Lešnjak, Andrej AU - Zorc, Borut AU - Zorko, Jože AU - Krošelj, Franc PY - 2000 TI - The Role of Welding in the Manufacture of the Steam Generators for the Krško Nuclear Power Plant JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - nucelar power engineering; steam generators; submerged-arc cladding; TIG welding; N2 - This paper describes welding and cladding technologies used in the manufacture of the steam generators for the Krško Nuclear Power Plant. The most important welded joints and claddings are treated, however, all the welded joints and claddings could not be treated because there are around 60.000 in each steam generator. First, cladding of the inner surface of the primary head of the steam generator is described. Submerged-arc cladding with a strip electrode was used for this purpose. Then the production of the welded joints between a tube and a tube sheet is described. All 5428 tubes were joined to the tube sheet, at each end, by TIG welding, preceded by mechanical rolling-in and hydraulic expansion. Welding of a partition plate to the primary head and to the tube sheet is described in the third part of the paper. Both welded joints, i.e. the one between the partition plate and the tube sheet and the one between the partition plate and the primary head, are shown as macro sections. Finally, welding of circumferential welds at the steam-generator shell is described. Two different arc welding processes were used for the purpose. The weld root was manually arc welded with a covered electrode while other welds were automatically submerged-arc welded. In the conclusions, it is stated that the welding technologies used were selected properly and well controlled during execution, which ensured the quality of the steam generator UR - https://www.sv-jme.eu/sl/article/the-role-of-welding-in-the-manufacture-of-the-steam-generators-for-the-krsko-nuclear-power-plant/
@article{{}{.},
author = {Tušek, J., Lešnjak, A., Zorc, B., Zorko, J., Krošelj, F.},
title = {The Role of Welding in the Manufacture of the Steam Generators for the Krško Nuclear Power Plant},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {46},
number = {3},
year = {2000},
doi = {},
url = {https://www.sv-jme.eu/sl/article/the-role-of-welding-in-the-manufacture-of-the-steam-generators-for-the-krsko-nuclear-power-plant/}
}
TY - JOUR AU - Tušek, Janez AU - Lešnjak, Andrej AU - Zorc, Borut AU - Zorko, Jože AU - Krošelj, Franc PY - 2017/07/07 TI - The Role of Welding in the Manufacture of the Steam Generators for the Krško Nuclear Power Plant JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 46, No 3 (2000): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - nucelar power engineering, steam generators, submerged-arc cladding, TIG welding, N2 - This paper describes welding and cladding technologies used in the manufacture of the steam generators for the Krško Nuclear Power Plant. The most important welded joints and claddings are treated, however, all the welded joints and claddings could not be treated because there are around 60.000 in each steam generator. First, cladding of the inner surface of the primary head of the steam generator is described. Submerged-arc cladding with a strip electrode was used for this purpose. Then the production of the welded joints between a tube and a tube sheet is described. All 5428 tubes were joined to the tube sheet, at each end, by TIG welding, preceded by mechanical rolling-in and hydraulic expansion. Welding of a partition plate to the primary head and to the tube sheet is described in the third part of the paper. Both welded joints, i.e. the one between the partition plate and the tube sheet and the one between the partition plate and the primary head, are shown as macro sections. Finally, welding of circumferential welds at the steam-generator shell is described. Two different arc welding processes were used for the purpose. The weld root was manually arc welded with a covered electrode while other welds were automatically submerged-arc welded. In the conclusions, it is stated that the welding technologies used were selected properly and well controlled during execution, which ensured the quality of the steam generator UR - https://www.sv-jme.eu/sl/article/the-role-of-welding-in-the-manufacture-of-the-steam-generators-for-the-krsko-nuclear-power-plant/
Tušek, Janez, Lešnjak, Andrej, Zorc, Borut, Zorko, Jože, AND Krošelj, Franc. "The Role of Welding in the Manufacture of the Steam Generators for the Krško Nuclear Power Plant" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 46 Number 3 (07 July 2017)
Strojniški vestnik - Journal of Mechanical Engineering 46(2000)3, 162-180
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
This paper describes welding and cladding technologies used in the manufacture of the steam generators for the Krško Nuclear Power Plant. The most important welded joints and claddings are treated, however, all the welded joints and claddings could not be treated because there are around 60.000 in each steam generator. First, cladding of the inner surface of the primary head of the steam generator is described. Submerged-arc cladding with a strip electrode was used for this purpose. Then the production of the welded joints between a tube and a tube sheet is described. All 5428 tubes were joined to the tube sheet, at each end, by TIG welding, preceded by mechanical rolling-in and hydraulic expansion. Welding of a partition plate to the primary head and to the tube sheet is described in the third part of the paper. Both welded joints, i.e. the one between the partition plate and the tube sheet and the one between the partition plate and the primary head, are shown as macro sections. Finally, welding of circumferential welds at the steam-generator shell is described. Two different arc welding processes were used for the purpose. The weld root was manually arc welded with a covered electrode while other welds were automatically submerged-arc welded. In the conclusions, it is stated that the welding technologies used were selected properly and well controlled during execution, which ensured the quality of the steam generator