ESTEVES, Fantina Rosa;CARVALHO, Tiago Alexandre;POUZADA, António Sérgio;MARTINS, Carla Isabel. The Influence of Processing on the Aesthetic, Morphological and Mechanical Properties of Structural Foam Mouldings of High- Impact Polystyrene. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 59, n.11, p. 637-645, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/the-influence-of-processing-on-the-aesthetic-morphological-and-mechanical-properties-of-structural-foam-mouldings-of-high-impact-polystyrene/>. Date accessed: 20 dec. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2013.997.
Esteves, F., Carvalho, T., Pouzada, A., & Martins, C. (2013). The Influence of Processing on the Aesthetic, Morphological and Mechanical Properties of Structural Foam Mouldings of High- Impact Polystyrene. Strojniški vestnik - Journal of Mechanical Engineering, 59(11), 637-645. doi:http://dx.doi.org/10.5545/sv-jme.2013.997
@article{sv-jmesv-jme.2013.997,
author = {Fantina Rosa Esteves and Tiago Alexandre Carvalho and António Sérgio Pouzada and Carla Isabel Martins},
title = {The Influence of Processing on the Aesthetic, Morphological and Mechanical Properties of Structural Foam Mouldings of High- Impact Polystyrene},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {59},
number = {11},
year = {2013},
keywords = {Structural foam; hybrid mould; skin thickness; mechanical strength},
abstract = {The production of large plastic parts, in small series and at low cost, requires the development of alternative tools and materials. Structural foams (SF) are an appropriate solution, when the production of thicker parts with superior properties is specified. They allow the production of lightweight parts with high stiffness and excellent dimensional stability, due to their sandwich-like structure consisting of a cellular core and two solid skins. The porous core is the result of the addition of a blowing agent in the polymeric matrix. These materials are applied in the urban furniture, automotive, nautical and aerospace industries. The most commonly used process to produce SF is low pressure foam moulding, which is a short-shot process, with impression pressures below 4 MPa. Therefore, the use of hybrid moulds with moulding blocks obtained by rapid prototyping routes is seen as a viable alternative for SF injection moulding. This work reports a study of the influence of processing conditions on the aesthetic, morphological, and mechanical properties of SF mouldings of high-impact polystyrene (HIPS-SF). The results compare the effect of the use of hybrid moulds to conventional moulds on the surface aspect of the circular centre-gated mouldings. Furthermore, the influence of the moulding temperature is ascertained in terms of the resulting cellular morphology, the flexural stiffness of the plate mouldings, and the impact resistance in the instrumented drop weight test.},
issn = {0039-2480}, pages = {637-645}, doi = {10.5545/sv-jme.2013.997},
url = {https://www.sv-jme.eu/sl/article/the-influence-of-processing-on-the-aesthetic-morphological-and-mechanical-properties-of-structural-foam-mouldings-of-high-impact-polystyrene/}
}
Esteves, F.,Carvalho, T.,Pouzada, A.,Martins, C. 2013 June 59. The Influence of Processing on the Aesthetic, Morphological and Mechanical Properties of Structural Foam Mouldings of High- Impact Polystyrene. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 59:11
%A Esteves, Fantina Rosa %A Carvalho, Tiago Alexandre %A Pouzada, António Sérgio %A Martins, Carla Isabel %D 2013 %T The Influence of Processing on the Aesthetic, Morphological and Mechanical Properties of Structural Foam Mouldings of High- Impact Polystyrene %B 2013 %9 Structural foam; hybrid mould; skin thickness; mechanical strength %! The Influence of Processing on the Aesthetic, Morphological and Mechanical Properties of Structural Foam Mouldings of High- Impact Polystyrene %K Structural foam; hybrid mould; skin thickness; mechanical strength %X The production of large plastic parts, in small series and at low cost, requires the development of alternative tools and materials. Structural foams (SF) are an appropriate solution, when the production of thicker parts with superior properties is specified. They allow the production of lightweight parts with high stiffness and excellent dimensional stability, due to their sandwich-like structure consisting of a cellular core and two solid skins. The porous core is the result of the addition of a blowing agent in the polymeric matrix. These materials are applied in the urban furniture, automotive, nautical and aerospace industries. The most commonly used process to produce SF is low pressure foam moulding, which is a short-shot process, with impression pressures below 4 MPa. Therefore, the use of hybrid moulds with moulding blocks obtained by rapid prototyping routes is seen as a viable alternative for SF injection moulding. This work reports a study of the influence of processing conditions on the aesthetic, morphological, and mechanical properties of SF mouldings of high-impact polystyrene (HIPS-SF). The results compare the effect of the use of hybrid moulds to conventional moulds on the surface aspect of the circular centre-gated mouldings. Furthermore, the influence of the moulding temperature is ascertained in terms of the resulting cellular morphology, the flexural stiffness of the plate mouldings, and the impact resistance in the instrumented drop weight test. %U https://www.sv-jme.eu/sl/article/the-influence-of-processing-on-the-aesthetic-morphological-and-mechanical-properties-of-structural-foam-mouldings-of-high-impact-polystyrene/ %0 Journal Article %R 10.5545/sv-jme.2013.997 %& 637 %P 9 %J Strojniški vestnik - Journal of Mechanical Engineering %V 59 %N 11 %@ 0039-2480 %8 2018-06-28 %7 2018-06-28
Esteves, Fantina, Tiago Alexandre Carvalho, António Sérgio Pouzada, & Carla Isabel Martins. "The Influence of Processing on the Aesthetic, Morphological and Mechanical Properties of Structural Foam Mouldings of High- Impact Polystyrene." Strojniški vestnik - Journal of Mechanical Engineering [Online], 59.11 (2013): 637-645. Web. 20 Dec. 2024
TY - JOUR AU - Esteves, Fantina Rosa AU - Carvalho, Tiago Alexandre AU - Pouzada, António Sérgio AU - Martins, Carla Isabel PY - 2013 TI - The Influence of Processing on the Aesthetic, Morphological and Mechanical Properties of Structural Foam Mouldings of High- Impact Polystyrene JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2013.997 KW - Structural foam; hybrid mould; skin thickness; mechanical strength N2 - The production of large plastic parts, in small series and at low cost, requires the development of alternative tools and materials. Structural foams (SF) are an appropriate solution, when the production of thicker parts with superior properties is specified. They allow the production of lightweight parts with high stiffness and excellent dimensional stability, due to their sandwich-like structure consisting of a cellular core and two solid skins. The porous core is the result of the addition of a blowing agent in the polymeric matrix. These materials are applied in the urban furniture, automotive, nautical and aerospace industries. The most commonly used process to produce SF is low pressure foam moulding, which is a short-shot process, with impression pressures below 4 MPa. Therefore, the use of hybrid moulds with moulding blocks obtained by rapid prototyping routes is seen as a viable alternative for SF injection moulding. This work reports a study of the influence of processing conditions on the aesthetic, morphological, and mechanical properties of SF mouldings of high-impact polystyrene (HIPS-SF). The results compare the effect of the use of hybrid moulds to conventional moulds on the surface aspect of the circular centre-gated mouldings. Furthermore, the influence of the moulding temperature is ascertained in terms of the resulting cellular morphology, the flexural stiffness of the plate mouldings, and the impact resistance in the instrumented drop weight test. UR - https://www.sv-jme.eu/sl/article/the-influence-of-processing-on-the-aesthetic-morphological-and-mechanical-properties-of-structural-foam-mouldings-of-high-impact-polystyrene/
@article{{sv-jme}{sv-jme.2013.997},
author = {Esteves, F., Carvalho, T., Pouzada, A., Martins, C.},
title = {The Influence of Processing on the Aesthetic, Morphological and Mechanical Properties of Structural Foam Mouldings of High- Impact Polystyrene},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {59},
number = {11},
year = {2013},
doi = {10.5545/sv-jme.2013.997},
url = {https://www.sv-jme.eu/sl/article/the-influence-of-processing-on-the-aesthetic-morphological-and-mechanical-properties-of-structural-foam-mouldings-of-high-impact-polystyrene/}
}
TY - JOUR AU - Esteves, Fantina Rosa AU - Carvalho, Tiago Alexandre AU - Pouzada, António Sérgio AU - Martins, Carla Isabel PY - 2018/06/28 TI - The Influence of Processing on the Aesthetic, Morphological and Mechanical Properties of Structural Foam Mouldings of High- Impact Polystyrene JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 59, No 11 (2013): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2013.997 KW - Structural foam, hybrid mould, skin thickness, mechanical strength N2 - The production of large plastic parts, in small series and at low cost, requires the development of alternative tools and materials. Structural foams (SF) are an appropriate solution, when the production of thicker parts with superior properties is specified. They allow the production of lightweight parts with high stiffness and excellent dimensional stability, due to their sandwich-like structure consisting of a cellular core and two solid skins. The porous core is the result of the addition of a blowing agent in the polymeric matrix. These materials are applied in the urban furniture, automotive, nautical and aerospace industries. The most commonly used process to produce SF is low pressure foam moulding, which is a short-shot process, with impression pressures below 4 MPa. Therefore, the use of hybrid moulds with moulding blocks obtained by rapid prototyping routes is seen as a viable alternative for SF injection moulding. This work reports a study of the influence of processing conditions on the aesthetic, morphological, and mechanical properties of SF mouldings of high-impact polystyrene (HIPS-SF). The results compare the effect of the use of hybrid moulds to conventional moulds on the surface aspect of the circular centre-gated mouldings. Furthermore, the influence of the moulding temperature is ascertained in terms of the resulting cellular morphology, the flexural stiffness of the plate mouldings, and the impact resistance in the instrumented drop weight test. UR - https://www.sv-jme.eu/sl/article/the-influence-of-processing-on-the-aesthetic-morphological-and-mechanical-properties-of-structural-foam-mouldings-of-high-impact-polystyrene/
Esteves, Fantina, Carvalho, Tiago, Pouzada, António, AND Martins, Carla. "The Influence of Processing on the Aesthetic, Morphological and Mechanical Properties of Structural Foam Mouldings of High- Impact Polystyrene" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 59 Number 11 (28 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 59(2013)11, 637-645
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
The production of large plastic parts, in small series and at low cost, requires the development of alternative tools and materials. Structural foams (SF) are an appropriate solution, when the production of thicker parts with superior properties is specified. They allow the production of lightweight parts with high stiffness and excellent dimensional stability, due to their sandwich-like structure consisting of a cellular core and two solid skins. The porous core is the result of the addition of a blowing agent in the polymeric matrix. These materials are applied in the urban furniture, automotive, nautical and aerospace industries. The most commonly used process to produce SF is low pressure foam moulding, which is a short-shot process, with impression pressures below 4 MPa. Therefore, the use of hybrid moulds with moulding blocks obtained by rapid prototyping routes is seen as a viable alternative for SF injection moulding. This work reports a study of the influence of processing conditions on the aesthetic, morphological, and mechanical properties of SF mouldings of high-impact polystyrene (HIPS-SF). The results compare the effect of the use of hybrid moulds to conventional moulds on the surface aspect of the circular centre-gated mouldings. Furthermore, the influence of the moulding temperature is ascertained in terms of the resulting cellular morphology, the flexural stiffness of the plate mouldings, and the impact resistance in the instrumented drop weight test.