WAGNER, Andrej ;BUČAR, Tomaž ;FAJDIGA, Matija . The Effects of Different Analysis Parameters on the Calculated Temperature of a Loaded Headlamp. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 52, n.1, p. 52-62, august 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/the-effects-of-different-analysis-parameters-on-the-calculated-temperature-of-a-loaded-headlamp/>. Date accessed: 19 nov. 2024. doi:http://dx.doi.org/.
Wagner, A., Bučar, T., & Fajdiga, M. (2006). The Effects of Different Analysis Parameters on the Calculated Temperature of a Loaded Headlamp. Strojniški vestnik - Journal of Mechanical Engineering, 52(1), 52-62. doi:http://dx.doi.org/
@article{.,
author = {Andrej Wagner and Tomaž Bučar and Matija Fajdiga},
title = {The Effects of Different Analysis Parameters on the Calculated Temperature of a Loaded Headlamp},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {52},
number = {1},
year = {2006},
keywords = {automotive headlamp; temperature loads; stress-strain state; finite-element methods; },
abstract = {Modern headlamps are made from low-cost plastic materials, which are very convenient for modern headlamp design. On the other hand, plastic materials do not withstand high temperatures. This can cause deformations that result in problems with the photometric properties and with the sealing of headlamp. In this article the stress-strain state of a fog lamp from Saturnus avtooprema d.d. caused by thermal loads was analyzed with finite-element analyses (FEA). The effects of different analysis parameters and finite-element types on the thermo-mechanical properties were analyzed. With the results of the FEA we determined the deformations to the headlamp housing. This analysis helped us to eliminate the causes of the bad sealing between the housing and the cover of the headlamp.},
issn = {0039-2480}, pages = {52-62}, doi = {},
url = {https://www.sv-jme.eu/sl/article/the-effects-of-different-analysis-parameters-on-the-calculated-temperature-of-a-loaded-headlamp/}
}
Wagner, A.,Bučar, T.,Fajdiga, M. 2006 August 52. The Effects of Different Analysis Parameters on the Calculated Temperature of a Loaded Headlamp. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 52:1
%A Wagner, Andrej %A Bučar, Tomaž %A Fajdiga, Matija %D 2006 %T The Effects of Different Analysis Parameters on the Calculated Temperature of a Loaded Headlamp %B 2006 %9 automotive headlamp; temperature loads; stress-strain state; finite-element methods; %! The Effects of Different Analysis Parameters on the Calculated Temperature of a Loaded Headlamp %K automotive headlamp; temperature loads; stress-strain state; finite-element methods; %X Modern headlamps are made from low-cost plastic materials, which are very convenient for modern headlamp design. On the other hand, plastic materials do not withstand high temperatures. This can cause deformations that result in problems with the photometric properties and with the sealing of headlamp. In this article the stress-strain state of a fog lamp from Saturnus avtooprema d.d. caused by thermal loads was analyzed with finite-element analyses (FEA). The effects of different analysis parameters and finite-element types on the thermo-mechanical properties were analyzed. With the results of the FEA we determined the deformations to the headlamp housing. This analysis helped us to eliminate the causes of the bad sealing between the housing and the cover of the headlamp. %U https://www.sv-jme.eu/sl/article/the-effects-of-different-analysis-parameters-on-the-calculated-temperature-of-a-loaded-headlamp/ %0 Journal Article %R %& 52 %P 11 %J Strojniški vestnik - Journal of Mechanical Engineering %V 52 %N 1 %@ 0039-2480 %8 2017-08-18 %7 2017-08-18
Wagner, Andrej, Tomaž Bučar, & Matija Fajdiga. "The Effects of Different Analysis Parameters on the Calculated Temperature of a Loaded Headlamp." Strojniški vestnik - Journal of Mechanical Engineering [Online], 52.1 (2006): 52-62. Web. 19 Nov. 2024
TY - JOUR AU - Wagner, Andrej AU - Bučar, Tomaž AU - Fajdiga, Matija PY - 2006 TI - The Effects of Different Analysis Parameters on the Calculated Temperature of a Loaded Headlamp JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - automotive headlamp; temperature loads; stress-strain state; finite-element methods; N2 - Modern headlamps are made from low-cost plastic materials, which are very convenient for modern headlamp design. On the other hand, plastic materials do not withstand high temperatures. This can cause deformations that result in problems with the photometric properties and with the sealing of headlamp. In this article the stress-strain state of a fog lamp from Saturnus avtooprema d.d. caused by thermal loads was analyzed with finite-element analyses (FEA). The effects of different analysis parameters and finite-element types on the thermo-mechanical properties were analyzed. With the results of the FEA we determined the deformations to the headlamp housing. This analysis helped us to eliminate the causes of the bad sealing between the housing and the cover of the headlamp. UR - https://www.sv-jme.eu/sl/article/the-effects-of-different-analysis-parameters-on-the-calculated-temperature-of-a-loaded-headlamp/
@article{{}{.},
author = {Wagner, A., Bučar, T., Fajdiga, M.},
title = {The Effects of Different Analysis Parameters on the Calculated Temperature of a Loaded Headlamp},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {52},
number = {1},
year = {2006},
doi = {},
url = {https://www.sv-jme.eu/sl/article/the-effects-of-different-analysis-parameters-on-the-calculated-temperature-of-a-loaded-headlamp/}
}
TY - JOUR AU - Wagner, Andrej AU - Bučar, Tomaž AU - Fajdiga, Matija PY - 2017/08/18 TI - The Effects of Different Analysis Parameters on the Calculated Temperature of a Loaded Headlamp JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 52, No 1 (2006): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - automotive headlamp, temperature loads, stress-strain state, finite-element methods, N2 - Modern headlamps are made from low-cost plastic materials, which are very convenient for modern headlamp design. On the other hand, plastic materials do not withstand high temperatures. This can cause deformations that result in problems with the photometric properties and with the sealing of headlamp. In this article the stress-strain state of a fog lamp from Saturnus avtooprema d.d. caused by thermal loads was analyzed with finite-element analyses (FEA). The effects of different analysis parameters and finite-element types on the thermo-mechanical properties were analyzed. With the results of the FEA we determined the deformations to the headlamp housing. This analysis helped us to eliminate the causes of the bad sealing between the housing and the cover of the headlamp. UR - https://www.sv-jme.eu/sl/article/the-effects-of-different-analysis-parameters-on-the-calculated-temperature-of-a-loaded-headlamp/
Wagner, Andrej, Bučar, Tomaž, AND Fajdiga, Matija. "The Effects of Different Analysis Parameters on the Calculated Temperature of a Loaded Headlamp" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 52 Number 1 (18 August 2017)
Strojniški vestnik - Journal of Mechanical Engineering 52(2006)1, 52-62
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
Modern headlamps are made from low-cost plastic materials, which are very convenient for modern headlamp design. On the other hand, plastic materials do not withstand high temperatures. This can cause deformations that result in problems with the photometric properties and with the sealing of headlamp. In this article the stress-strain state of a fog lamp from Saturnus avtooprema d.d. caused by thermal loads was analyzed with finite-element analyses (FEA). The effects of different analysis parameters and finite-element types on the thermo-mechanical properties were analyzed. With the results of the FEA we determined the deformations to the headlamp housing. This analysis helped us to eliminate the causes of the bad sealing between the housing and the cover of the headlamp.