The Effects of a Tool’s Chemical Composition on Its Performance when Turning Inconel 718 with Ceramic Inserts

ALTIN, Abdullah ;TASKESEN, Ahmet ;NALBANT, Muammer ;SEKER, Ulvi .
The Effects of a Tool’s Chemical Composition on Its Performance when Turning Inconel 718 with Ceramic Inserts. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 53, n.6, p. 379-385, august 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/the-effects-of-a-tools-chemical-composition-on-its-performance-when-turning-inconel-718-with-ceramic-inserts/>. Date accessed: 20 dec. 2024. 
doi:http://dx.doi.org/.

Altin, A., Taskesen, A., Nalbant, M., & Seker, U.
(2007).
The Effects of a Tool’s Chemical Composition on Its Performance when Turning Inconel 718 with Ceramic Inserts.
Strojniški vestnik - Journal of Mechanical Engineering, 53(6), 379-385.
doi:http://dx.doi.org/

@article{.,
	author = {Abdullah  Altin and Ahmet  Taskesen and Muammer  Nalbant and Ulvi  Seker},
	title = {The Effects of a Tool’s Chemical Composition on Its Performance when Turning Inconel 718 with Ceramic Inserts},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {53},
	number = {6},
	year = {2007},
	keywords = {cutting tools; chemical properties; superalloys; tool wears; },
	abstract = {The effects of a cutting tool's chemical composition on wear and tool life are investigated. A series of experiments was carried out using silicon-nitrite-based (Si, Al, O, N) and whisker-reinforced ceramic tools (Al2 O3 +SiCw) that have two different geometries (square and circular) and three different ISO qualities. For the ceramic tools, a high level of aluminum and germanium caused built-up edge (BUE) formation, while notch wear is considered as a cause of high copper and oxygen levels in whisker-reinforced ceramic tools. Four different tools with two qualities showed the best performance at a cutting speed of 200 m/min. The fact that the whisker-reinforced square-type ceramic tools are subjected to plastic deformation is attributed to the high oxygen level in the cutting tool's structure.},
	issn = {0039-2480},	pages = {379-385},	doi = {},
	url = {https://www.sv-jme.eu/sl/article/the-effects-of-a-tools-chemical-composition-on-its-performance-when-turning-inconel-718-with-ceramic-inserts/}
}

Altin, A.,Taskesen, A.,Nalbant, M.,Seker, U.
2007 August 53. The Effects of a Tool’s Chemical Composition on Its Performance when Turning Inconel 718 with Ceramic Inserts. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 53:6

%A Altin, Abdullah 
%A Taskesen, Ahmet 
%A Nalbant, Muammer 
%A Seker, Ulvi 
%D 2007
%T The Effects of a Tool’s Chemical Composition on Its Performance when Turning Inconel 718 with Ceramic Inserts
%B 2007
%9 cutting tools; chemical properties; superalloys; tool wears; 
%! The Effects of a Tool’s Chemical Composition on Its Performance when Turning Inconel 718 with Ceramic Inserts
%K cutting tools; chemical properties; superalloys; tool wears; 
%X The effects of a cutting tool's chemical composition on wear and tool life are investigated. A series of experiments was carried out using silicon-nitrite-based (Si, Al, O, N) and whisker-reinforced ceramic tools (Al2 O3 +SiCw) that have two different geometries (square and circular) and three different ISO qualities. For the ceramic tools, a high level of aluminum and germanium caused built-up edge (BUE) formation, while notch wear is considered as a cause of high copper and oxygen levels in whisker-reinforced ceramic tools. Four different tools with two qualities showed the best performance at a cutting speed of 200 m/min. The fact that the whisker-reinforced square-type ceramic tools are subjected to plastic deformation is attributed to the high oxygen level in the cutting tool's structure.
%U https://www.sv-jme.eu/sl/article/the-effects-of-a-tools-chemical-composition-on-its-performance-when-turning-inconel-718-with-ceramic-inserts/
%0 Journal Article
%R 
%& 379
%P 7
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 53
%N 6
%@ 0039-2480
%8 2017-08-18
%7 2017-08-18

Altin, Abdullah, Ahmet  Taskesen, Muammer  Nalbant, & Ulvi  Seker.
"The Effects of a Tool’s Chemical Composition on Its Performance when Turning Inconel 718 with Ceramic Inserts." Strojniški vestnik - Journal of Mechanical Engineering [Online], 53.6 (2007): 379-385. Web.  20 Dec. 2024

TY  - JOUR
AU  - Altin, Abdullah 
AU  - Taskesen, Ahmet 
AU  - Nalbant, Muammer 
AU  - Seker, Ulvi 
PY  - 2007
TI  - The Effects of a Tool’s Chemical Composition on Its Performance when Turning Inconel 718 with Ceramic Inserts
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - cutting tools; chemical properties; superalloys; tool wears; 
N2  - The effects of a cutting tool's chemical composition on wear and tool life are investigated. A series of experiments was carried out using silicon-nitrite-based (Si, Al, O, N) and whisker-reinforced ceramic tools (Al2 O3 +SiCw) that have two different geometries (square and circular) and three different ISO qualities. For the ceramic tools, a high level of aluminum and germanium caused built-up edge (BUE) formation, while notch wear is considered as a cause of high copper and oxygen levels in whisker-reinforced ceramic tools. Four different tools with two qualities showed the best performance at a cutting speed of 200 m/min. The fact that the whisker-reinforced square-type ceramic tools are subjected to plastic deformation is attributed to the high oxygen level in the cutting tool's structure.
UR  - https://www.sv-jme.eu/sl/article/the-effects-of-a-tools-chemical-composition-on-its-performance-when-turning-inconel-718-with-ceramic-inserts/

@article{{}{.},
	author = {Altin, A., Taskesen, A., Nalbant, M., Seker, U.},
	title = {The Effects of a Tool’s Chemical Composition on Its Performance when Turning Inconel 718 with Ceramic Inserts},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {53},
	number = {6},
	year = {2007},
	doi = {},
	url = {https://www.sv-jme.eu/sl/article/the-effects-of-a-tools-chemical-composition-on-its-performance-when-turning-inconel-718-with-ceramic-inserts/}
}

TY  - JOUR
AU  - Altin, Abdullah 
AU  - Taskesen, Ahmet 
AU  - Nalbant, Muammer 
AU  - Seker, Ulvi 
PY  - 2017/08/18
TI  - The Effects of a Tool’s Chemical Composition on Its Performance when Turning Inconel 718 with Ceramic Inserts
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 53, No 6 (2007): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - cutting tools, chemical properties, superalloys, tool wears, 
N2  - The effects of a cutting tool's chemical composition on wear and tool life are investigated. A series of experiments was carried out using silicon-nitrite-based (Si, Al, O, N) and whisker-reinforced ceramic tools (Al2 O3 +SiCw) that have two different geometries (square and circular) and three different ISO qualities. For the ceramic tools, a high level of aluminum and germanium caused built-up edge (BUE) formation, while notch wear is considered as a cause of high copper and oxygen levels in whisker-reinforced ceramic tools. Four different tools with two qualities showed the best performance at a cutting speed of 200 m/min. The fact that the whisker-reinforced square-type ceramic tools are subjected to plastic deformation is attributed to the high oxygen level in the cutting tool's structure.
UR  - https://www.sv-jme.eu/sl/article/the-effects-of-a-tools-chemical-composition-on-its-performance-when-turning-inconel-718-with-ceramic-inserts/

Altin, Abdullah, Taskesen, Ahmet, Nalbant, Muammer, AND Seker, Ulvi.
"The Effects of a Tool’s Chemical Composition on Its Performance when Turning Inconel 718 with Ceramic Inserts" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 53 Number 6 (18 August 2017)