BALASUBRAMANIAN, Muthusamy ;GANESH, Pasupathy ;RAMANATHAN, Kalimuthu ;SENTHIL KUMAR, Velukkudi Santhanam . Superplastic Forming of a Three-Stage Hemispherical 5083 Aluminium Profile. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 61, n.6, p. 365-373, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/superplastic-forming-of-a-three-stage-hemispherical-5083-aluminium-profile/>. Date accessed: 19 nov. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2014.2178.
Balasubramanian, M., Ganesh, P., Ramanathan, K., & Senthil Kumar, V. (2015). Superplastic Forming of a Three-Stage Hemispherical 5083 Aluminium Profile. Strojniški vestnik - Journal of Mechanical Engineering, 61(6), 365-373. doi:http://dx.doi.org/10.5545/sv-jme.2014.2178
@article{sv-jmesv-jme.2014.2178,
author = {Muthusamy Balasubramanian and Pasupathy Ganesh and Kalimuthu Ramanathan and Velukkudi Santhanam Senthil Kumar},
title = {Superplastic Forming of a Three-Stage Hemispherical 5083 Aluminium Profile},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {61},
number = {6},
year = {2015},
keywords = {Superplastic forming; Three-stage radius hemispherical shape; FEM; 5083 Al},
abstract = {Three-stage superplastic blow forming characteristics of 5083 aluminium sheets in a hemispherical die cavity have been studied as a function of forming pressure, die entry radius, coefficient of friction, forming time and forming height, both experimentally and using finite element method in this work. Optimum forming pressure for achieving uniform thickness in a complex three-stage radius dome profile has been established. Variations in thickness profile are observed experimentally and in FEM analysis in three different die entry regions. The thickness profile has also been predicted as a function of the friction coefficient and die entry radius. The changes in pole thickness, relative height and relative radius of the profile along with the thinning factor are discussed.},
issn = {0039-2480}, pages = {365-373}, doi = {10.5545/sv-jme.2014.2178},
url = {https://www.sv-jme.eu/sl/article/superplastic-forming-of-a-three-stage-hemispherical-5083-aluminium-profile/}
}
Balasubramanian, M.,Ganesh, P.,Ramanathan, K.,Senthil Kumar, V. 2015 June 61. Superplastic Forming of a Three-Stage Hemispherical 5083 Aluminium Profile. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 61:6
%A Balasubramanian, Muthusamy %A Ganesh, Pasupathy %A Ramanathan, Kalimuthu %A Senthil Kumar, Velukkudi Santhanam %D 2015 %T Superplastic Forming of a Three-Stage Hemispherical 5083 Aluminium Profile %B 2015 %9 Superplastic forming; Three-stage radius hemispherical shape; FEM; 5083 Al %! Superplastic Forming of a Three-Stage Hemispherical 5083 Aluminium Profile %K Superplastic forming; Three-stage radius hemispherical shape; FEM; 5083 Al %X Three-stage superplastic blow forming characteristics of 5083 aluminium sheets in a hemispherical die cavity have been studied as a function of forming pressure, die entry radius, coefficient of friction, forming time and forming height, both experimentally and using finite element method in this work. Optimum forming pressure for achieving uniform thickness in a complex three-stage radius dome profile has been established. Variations in thickness profile are observed experimentally and in FEM analysis in three different die entry regions. The thickness profile has also been predicted as a function of the friction coefficient and die entry radius. The changes in pole thickness, relative height and relative radius of the profile along with the thinning factor are discussed. %U https://www.sv-jme.eu/sl/article/superplastic-forming-of-a-three-stage-hemispherical-5083-aluminium-profile/ %0 Journal Article %R 10.5545/sv-jme.2014.2178 %& 365 %P 9 %J Strojniški vestnik - Journal of Mechanical Engineering %V 61 %N 6 %@ 0039-2480 %8 2018-06-27 %7 2018-06-27
Balasubramanian, Muthusamy, Pasupathy Ganesh, Kalimuthu Ramanathan, & Velukkudi Santhanam Senthil Kumar. "Superplastic Forming of a Three-Stage Hemispherical 5083 Aluminium Profile." Strojniški vestnik - Journal of Mechanical Engineering [Online], 61.6 (2015): 365-373. Web. 19 Nov. 2024
TY - JOUR AU - Balasubramanian, Muthusamy AU - Ganesh, Pasupathy AU - Ramanathan, Kalimuthu AU - Senthil Kumar, Velukkudi Santhanam PY - 2015 TI - Superplastic Forming of a Three-Stage Hemispherical 5083 Aluminium Profile JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2014.2178 KW - Superplastic forming; Three-stage radius hemispherical shape; FEM; 5083 Al N2 - Three-stage superplastic blow forming characteristics of 5083 aluminium sheets in a hemispherical die cavity have been studied as a function of forming pressure, die entry radius, coefficient of friction, forming time and forming height, both experimentally and using finite element method in this work. Optimum forming pressure for achieving uniform thickness in a complex three-stage radius dome profile has been established. Variations in thickness profile are observed experimentally and in FEM analysis in three different die entry regions. The thickness profile has also been predicted as a function of the friction coefficient and die entry radius. The changes in pole thickness, relative height and relative radius of the profile along with the thinning factor are discussed. UR - https://www.sv-jme.eu/sl/article/superplastic-forming-of-a-three-stage-hemispherical-5083-aluminium-profile/
@article{{sv-jme}{sv-jme.2014.2178},
author = {Balasubramanian, M., Ganesh, P., Ramanathan, K., Senthil Kumar, V.},
title = {Superplastic Forming of a Three-Stage Hemispherical 5083 Aluminium Profile},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {61},
number = {6},
year = {2015},
doi = {10.5545/sv-jme.2014.2178},
url = {https://www.sv-jme.eu/sl/article/superplastic-forming-of-a-three-stage-hemispherical-5083-aluminium-profile/}
}
TY - JOUR AU - Balasubramanian, Muthusamy AU - Ganesh, Pasupathy AU - Ramanathan, Kalimuthu AU - Senthil Kumar, Velukkudi Santhanam PY - 2018/06/27 TI - Superplastic Forming of a Three-Stage Hemispherical 5083 Aluminium Profile JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 61, No 6 (2015): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2014.2178 KW - Superplastic forming, Three-stage radius hemispherical shape, FEM, 5083 Al N2 - Three-stage superplastic blow forming characteristics of 5083 aluminium sheets in a hemispherical die cavity have been studied as a function of forming pressure, die entry radius, coefficient of friction, forming time and forming height, both experimentally and using finite element method in this work. Optimum forming pressure for achieving uniform thickness in a complex three-stage radius dome profile has been established. Variations in thickness profile are observed experimentally and in FEM analysis in three different die entry regions. The thickness profile has also been predicted as a function of the friction coefficient and die entry radius. The changes in pole thickness, relative height and relative radius of the profile along with the thinning factor are discussed. UR - https://www.sv-jme.eu/sl/article/superplastic-forming-of-a-three-stage-hemispherical-5083-aluminium-profile/
Balasubramanian, Muthusamy, Ganesh, Pasupathy, Ramanathan, Kalimuthu, AND Senthil Kumar, Velukkudi Santhanam. "Superplastic Forming of a Three-Stage Hemispherical 5083 Aluminium Profile" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 61 Number 6 (27 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 61(2015)6, 365-373
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
Three-stage superplastic blow forming characteristics of 5083 aluminium sheets in a hemispherical die cavity have been studied as a function of forming pressure, die entry radius, coefficient of friction, forming time and forming height, both experimentally and using finite element method in this work. Optimum forming pressure for achieving uniform thickness in a complex three-stage radius dome profile has been established. Variations in thickness profile are observed experimentally and in FEM analysis in three different die entry regions. The thickness profile has also been predicted as a function of the friction coefficient and die entry radius. The changes in pole thickness, relative height and relative radius of the profile along with the thinning factor are discussed.