BURTCHEN, Marco ;HUNKEL, Martin ;LÜBBEN, Thomas ;HOFFMAN, Franz ;ZOCH, Hans-Werner . Simulation of Quenching Treatments on Bearing Components. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 55, n.3, p. 155-159, august 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/simulation-of-quenching-treatments-on-bearing-components/>. Date accessed: 19 nov. 2024. doi:http://dx.doi.org/.
Burtchen, M., Hunkel, M., Lübben, T., Hoffman, F., & Zoch, H. (2009). Simulation of Quenching Treatments on Bearing Components. Strojniški vestnik - Journal of Mechanical Engineering, 55(3), 155-159. doi:http://dx.doi.org/
@article{.,
author = {Marco Burtchen and Martin Hunkel and Thomas Lübben and Franz Hoffman and Hans-Werner Zoch},
title = {Simulation of Quenching Treatments on Bearing Components},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {55},
number = {3},
year = {2009},
keywords = {heat tratment; quenching; hardness; bainite; residual stresses; },
abstract = {Bearing components with an improved product performance are a challenging task. While the components should decrease in size, higher loads should be applied while simultaneously the life cycle time should be increased. To fulfil these requirements, the desired product properties are mainly set during the heat treatment, specifically during the quenching process, so further development of these processes is considered relevant for future generation products. To minimize the amount of testing, computer simulations of the effects from heat treatments on the resulting properties are increasingly used as a development tool. This paper describes the attempt to simulate the quenching of a cylindrical ring made of SAE 52100 bearing steel quenched in salt, followed by an isothermal transformation, in order to understand and predict the hardening process with respect to phase transformations and residual stress generation.},
issn = {0039-2480}, pages = {155-159}, doi = {},
url = {https://www.sv-jme.eu/sl/article/simulation-of-quenching-treatments-on-bearing-components/}
}
Burtchen, M.,Hunkel, M.,Lübben, T.,Hoffman, F.,Zoch, H. 2009 August 55. Simulation of Quenching Treatments on Bearing Components. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 55:3
%A Burtchen, Marco %A Hunkel, Martin %A Lübben, Thomas %A Hoffman, Franz %A Zoch, Hans-Werner %D 2009 %T Simulation of Quenching Treatments on Bearing Components %B 2009 %9 heat tratment; quenching; hardness; bainite; residual stresses; %! Simulation of Quenching Treatments on Bearing Components %K heat tratment; quenching; hardness; bainite; residual stresses; %X Bearing components with an improved product performance are a challenging task. While the components should decrease in size, higher loads should be applied while simultaneously the life cycle time should be increased. To fulfil these requirements, the desired product properties are mainly set during the heat treatment, specifically during the quenching process, so further development of these processes is considered relevant for future generation products. To minimize the amount of testing, computer simulations of the effects from heat treatments on the resulting properties are increasingly used as a development tool. This paper describes the attempt to simulate the quenching of a cylindrical ring made of SAE 52100 bearing steel quenched in salt, followed by an isothermal transformation, in order to understand and predict the hardening process with respect to phase transformations and residual stress generation. %U https://www.sv-jme.eu/sl/article/simulation-of-quenching-treatments-on-bearing-components/ %0 Journal Article %R %& 155 %P 5 %J Strojniški vestnik - Journal of Mechanical Engineering %V 55 %N 3 %@ 0039-2480 %8 2017-08-21 %7 2017-08-21
Burtchen, Marco, Martin Hunkel, Thomas Lübben, Franz Hoffman, & Hans-Werner Zoch. "Simulation of Quenching Treatments on Bearing Components." Strojniški vestnik - Journal of Mechanical Engineering [Online], 55.3 (2009): 155-159. Web. 19 Nov. 2024
TY - JOUR AU - Burtchen, Marco AU - Hunkel, Martin AU - Lübben, Thomas AU - Hoffman, Franz AU - Zoch, Hans-Werner PY - 2009 TI - Simulation of Quenching Treatments on Bearing Components JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - heat tratment; quenching; hardness; bainite; residual stresses; N2 - Bearing components with an improved product performance are a challenging task. While the components should decrease in size, higher loads should be applied while simultaneously the life cycle time should be increased. To fulfil these requirements, the desired product properties are mainly set during the heat treatment, specifically during the quenching process, so further development of these processes is considered relevant for future generation products. To minimize the amount of testing, computer simulations of the effects from heat treatments on the resulting properties are increasingly used as a development tool. This paper describes the attempt to simulate the quenching of a cylindrical ring made of SAE 52100 bearing steel quenched in salt, followed by an isothermal transformation, in order to understand and predict the hardening process with respect to phase transformations and residual stress generation. UR - https://www.sv-jme.eu/sl/article/simulation-of-quenching-treatments-on-bearing-components/
@article{{}{.},
author = {Burtchen, M., Hunkel, M., Lübben, T., Hoffman, F., Zoch, H.},
title = {Simulation of Quenching Treatments on Bearing Components},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {55},
number = {3},
year = {2009},
doi = {},
url = {https://www.sv-jme.eu/sl/article/simulation-of-quenching-treatments-on-bearing-components/}
}
TY - JOUR AU - Burtchen, Marco AU - Hunkel, Martin AU - Lübben, Thomas AU - Hoffman, Franz AU - Zoch, Hans-Werner PY - 2017/08/21 TI - Simulation of Quenching Treatments on Bearing Components JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 55, No 3 (2009): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - heat tratment, quenching, hardness, bainite, residual stresses, N2 - Bearing components with an improved product performance are a challenging task. While the components should decrease in size, higher loads should be applied while simultaneously the life cycle time should be increased. To fulfil these requirements, the desired product properties are mainly set during the heat treatment, specifically during the quenching process, so further development of these processes is considered relevant for future generation products. To minimize the amount of testing, computer simulations of the effects from heat treatments on the resulting properties are increasingly used as a development tool. This paper describes the attempt to simulate the quenching of a cylindrical ring made of SAE 52100 bearing steel quenched in salt, followed by an isothermal transformation, in order to understand and predict the hardening process with respect to phase transformations and residual stress generation. UR - https://www.sv-jme.eu/sl/article/simulation-of-quenching-treatments-on-bearing-components/
Burtchen, Marco, Hunkel, Martin, Lübben, Thomas, Hoffman, Franz, AND Zoch, Hans-Werner. "Simulation of Quenching Treatments on Bearing Components" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 55 Number 3 (21 August 2017)
Strojniški vestnik - Journal of Mechanical Engineering 55(2009)3, 155-159
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
Bearing components with an improved product performance are a challenging task. While the components should decrease in size, higher loads should be applied while simultaneously the life cycle time should be increased. To fulfil these requirements, the desired product properties are mainly set during the heat treatment, specifically during the quenching process, so further development of these processes is considered relevant for future generation products. To minimize the amount of testing, computer simulations of the effects from heat treatments on the resulting properties are increasingly used as a development tool. This paper describes the attempt to simulate the quenching of a cylindrical ring made of SAE 52100 bearing steel quenched in salt, followed by an isothermal transformation, in order to understand and predict the hardening process with respect to phase transformations and residual stress generation.