ČERNETIČ, Jan ;PREZELJ, Jurij ;ČUDINA, Mirko . Simple feedback structure of active noise control in a duct. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 54, n.10, p. 649-654, august 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/simple-feedback-structure-of-active-noise-control-in-a-duct/>. Date accessed: 19 nov. 2024. doi:http://dx.doi.org/.
Černetič, J., Prezelj, J., & Čudina, M. (2008). Simple feedback structure of active noise control in a duct. Strojniški vestnik - Journal of Mechanical Engineering, 54(10), 649-654. doi:http://dx.doi.org/
@article{.,
author = {Jan Černetič and Jurij Prezelj and Mirko Čudina},
title = {Simple feedback structure of active noise control in a duct},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {54},
number = {10},
year = {2008},
keywords = {active noise control; feedback control; ANC simulation; phase shift; },
abstract = {An active noise control is usually constructed with the use of electronic filters. For sufficient noise attenuation, electronic filters are not always needed. In this case, the electronic controller and appropriate software is not required so the system can be much easier. This paper deals with the use of a feedback structure of active noise control in an experimental ventilation duct. Simulation was performed to investigate the efficiency of a simple analoguous system for active noise control without incorporating electronic filters. The transfer function of the entire analogous system can be used to predict the maximum attenuation level. Tests were made to verify the simulation and to show what noise attenuation level can be achieved in an experimental duct. It has been shown that in a specific frequency range this kind of a system is efficient enough for use in some ventilation ducts.},
issn = {0039-2480}, pages = {649-654}, doi = {},
url = {https://www.sv-jme.eu/sl/article/simple-feedback-structure-of-active-noise-control-in-a-duct/}
}
Černetič, J.,Prezelj, J.,Čudina, M. 2008 August 54. Simple feedback structure of active noise control in a duct. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 54:10
%A Černetič, Jan %A Prezelj, Jurij %A Čudina, Mirko %D 2008 %T Simple feedback structure of active noise control in a duct %B 2008 %9 active noise control; feedback control; ANC simulation; phase shift; %! Simple feedback structure of active noise control in a duct %K active noise control; feedback control; ANC simulation; phase shift; %X An active noise control is usually constructed with the use of electronic filters. For sufficient noise attenuation, electronic filters are not always needed. In this case, the electronic controller and appropriate software is not required so the system can be much easier. This paper deals with the use of a feedback structure of active noise control in an experimental ventilation duct. Simulation was performed to investigate the efficiency of a simple analoguous system for active noise control without incorporating electronic filters. The transfer function of the entire analogous system can be used to predict the maximum attenuation level. Tests were made to verify the simulation and to show what noise attenuation level can be achieved in an experimental duct. It has been shown that in a specific frequency range this kind of a system is efficient enough for use in some ventilation ducts. %U https://www.sv-jme.eu/sl/article/simple-feedback-structure-of-active-noise-control-in-a-duct/ %0 Journal Article %R %& 649 %P 6 %J Strojniški vestnik - Journal of Mechanical Engineering %V 54 %N 10 %@ 0039-2480 %8 2017-08-21 %7 2017-08-21
Černetič, Jan, Jurij Prezelj, & Mirko Čudina. "Simple feedback structure of active noise control in a duct." Strojniški vestnik - Journal of Mechanical Engineering [Online], 54.10 (2008): 649-654. Web. 19 Nov. 2024
TY - JOUR AU - Černetič, Jan AU - Prezelj, Jurij AU - Čudina, Mirko PY - 2008 TI - Simple feedback structure of active noise control in a duct JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - active noise control; feedback control; ANC simulation; phase shift; N2 - An active noise control is usually constructed with the use of electronic filters. For sufficient noise attenuation, electronic filters are not always needed. In this case, the electronic controller and appropriate software is not required so the system can be much easier. This paper deals with the use of a feedback structure of active noise control in an experimental ventilation duct. Simulation was performed to investigate the efficiency of a simple analoguous system for active noise control without incorporating electronic filters. The transfer function of the entire analogous system can be used to predict the maximum attenuation level. Tests were made to verify the simulation and to show what noise attenuation level can be achieved in an experimental duct. It has been shown that in a specific frequency range this kind of a system is efficient enough for use in some ventilation ducts. UR - https://www.sv-jme.eu/sl/article/simple-feedback-structure-of-active-noise-control-in-a-duct/
@article{{}{.},
author = {Černetič, J., Prezelj, J., Čudina, M.},
title = {Simple feedback structure of active noise control in a duct},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {54},
number = {10},
year = {2008},
doi = {},
url = {https://www.sv-jme.eu/sl/article/simple-feedback-structure-of-active-noise-control-in-a-duct/}
}
TY - JOUR AU - Černetič, Jan AU - Prezelj, Jurij AU - Čudina, Mirko PY - 2017/08/21 TI - Simple feedback structure of active noise control in a duct JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 54, No 10 (2008): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - active noise control, feedback control, ANC simulation, phase shift, N2 - An active noise control is usually constructed with the use of electronic filters. For sufficient noise attenuation, electronic filters are not always needed. In this case, the electronic controller and appropriate software is not required so the system can be much easier. This paper deals with the use of a feedback structure of active noise control in an experimental ventilation duct. Simulation was performed to investigate the efficiency of a simple analoguous system for active noise control without incorporating electronic filters. The transfer function of the entire analogous system can be used to predict the maximum attenuation level. Tests were made to verify the simulation and to show what noise attenuation level can be achieved in an experimental duct. It has been shown that in a specific frequency range this kind of a system is efficient enough for use in some ventilation ducts. UR - https://www.sv-jme.eu/sl/article/simple-feedback-structure-of-active-noise-control-in-a-duct/
Černetič, Jan, Prezelj, Jurij, AND Čudina, Mirko. "Simple feedback structure of active noise control in a duct" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 54 Number 10 (21 August 2017)
Strojniški vestnik - Journal of Mechanical Engineering 54(2008)10, 649-654
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
An active noise control is usually constructed with the use of electronic filters. For sufficient noise attenuation, electronic filters are not always needed. In this case, the electronic controller and appropriate software is not required so the system can be much easier. This paper deals with the use of a feedback structure of active noise control in an experimental ventilation duct. Simulation was performed to investigate the efficiency of a simple analoguous system for active noise control without incorporating electronic filters. The transfer function of the entire analogous system can be used to predict the maximum attenuation level. Tests were made to verify the simulation and to show what noise attenuation level can be achieved in an experimental duct. It has been shown that in a specific frequency range this kind of a system is efficient enough for use in some ventilation ducts.