DOGAN, Oguz . Short-term Creep Behaviour of Different Polymers Used in Additive Manufacturing under Different Thermal and Loading Conditions. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 68, n.7-8, p. 451-460, june 2022. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/short-term-creep-behavior-of-different-polymers-used-in-additive-manufacturing-under-different-thermal-and-loading-conditions/>. Date accessed: 19 nov. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2022.191.
Dogan, O. (2022). Short-term Creep Behaviour of Different Polymers Used in Additive Manufacturing under Different Thermal and Loading Conditions. Strojniški vestnik - Journal of Mechanical Engineering, 68(7-8), 451-460. doi:http://dx.doi.org/10.5545/sv-jme.2022.191
@article{sv-jmesv-jme.2022.191,
author = {Oguz Dogan},
title = {Short-term Creep Behaviour of Different Polymers Used in Additive Manufacturing under Different Thermal and Loading Conditions},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {68},
number = {7-8},
year = {2022},
keywords = {Additive manufacturing; creep experiments; polymer materials; thermal effect; },
abstract = {Polymer materials produced by additive manufacturing undergo significant changes in their dimensions under continuous loading conditions. This situation affects the operation of polymer structures produced by additive manufacturing within safe limits. Therefore, it is crucial to determine the creep behaviour of polymers produced by the additive manufacturing method. This study investigates the creep behaviour of six different materials, acrylonitrile butadiene styrene (ABS), chlorinated polyethylene (CPE), polylactic acid (PLA), tough polylactic acid (TPLA), polycarbonates (PC), and nylon most commonly used in additive manufacturing. The creep test specimens are firstly produced with a three-dimensional (3D) printer, and then their final dimensions are given using computer numerical control (CNC) milling. The creep experiments are carried out at three different ambient temperatures (25 °C, 40 °C, and 60 °C) and two different stress levels (10 MPa, 20 MPa). According to the test results, it was determined that the material type, temperature, and loading levels significantly influenced the creep behaviour of the 3D printed polymer materials.},
issn = {0039-2480}, pages = {451-460}, doi = {10.5545/sv-jme.2022.191},
url = {https://www.sv-jme.eu/sl/article/short-term-creep-behavior-of-different-polymers-used-in-additive-manufacturing-under-different-thermal-and-loading-conditions/}
}
Dogan, O. 2022 June 68. Short-term Creep Behaviour of Different Polymers Used in Additive Manufacturing under Different Thermal and Loading Conditions. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 68:7-8
%A Dogan, Oguz %D 2022 %T Short-term Creep Behaviour of Different Polymers Used in Additive Manufacturing under Different Thermal and Loading Conditions %B 2022 %9 Additive manufacturing; creep experiments; polymer materials; thermal effect; %! Short-term Creep Behaviour of Different Polymers Used in Additive Manufacturing under Different Thermal and Loading Conditions %K Additive manufacturing; creep experiments; polymer materials; thermal effect; %X Polymer materials produced by additive manufacturing undergo significant changes in their dimensions under continuous loading conditions. This situation affects the operation of polymer structures produced by additive manufacturing within safe limits. Therefore, it is crucial to determine the creep behaviour of polymers produced by the additive manufacturing method. This study investigates the creep behaviour of six different materials, acrylonitrile butadiene styrene (ABS), chlorinated polyethylene (CPE), polylactic acid (PLA), tough polylactic acid (TPLA), polycarbonates (PC), and nylon most commonly used in additive manufacturing. The creep test specimens are firstly produced with a three-dimensional (3D) printer, and then their final dimensions are given using computer numerical control (CNC) milling. The creep experiments are carried out at three different ambient temperatures (25 °C, 40 °C, and 60 °C) and two different stress levels (10 MPa, 20 MPa). According to the test results, it was determined that the material type, temperature, and loading levels significantly influenced the creep behaviour of the 3D printed polymer materials. %U https://www.sv-jme.eu/sl/article/short-term-creep-behavior-of-different-polymers-used-in-additive-manufacturing-under-different-thermal-and-loading-conditions/ %0 Journal Article %R 10.5545/sv-jme.2022.191 %& 451 %P 10 %J Strojniški vestnik - Journal of Mechanical Engineering %V 68 %N 7-8 %@ 0039-2480 %8 2022-06-23 %7 2022-06-23
Dogan, Oguz. "Short-term Creep Behaviour of Different Polymers Used in Additive Manufacturing under Different Thermal and Loading Conditions." Strojniški vestnik - Journal of Mechanical Engineering [Online], 68.7-8 (2022): 451-460. Web. 19 Nov. 2024
TY - JOUR AU - Dogan, Oguz PY - 2022 TI - Short-term Creep Behaviour of Different Polymers Used in Additive Manufacturing under Different Thermal and Loading Conditions JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2022.191 KW - Additive manufacturing; creep experiments; polymer materials; thermal effect; N2 - Polymer materials produced by additive manufacturing undergo significant changes in their dimensions under continuous loading conditions. This situation affects the operation of polymer structures produced by additive manufacturing within safe limits. Therefore, it is crucial to determine the creep behaviour of polymers produced by the additive manufacturing method. This study investigates the creep behaviour of six different materials, acrylonitrile butadiene styrene (ABS), chlorinated polyethylene (CPE), polylactic acid (PLA), tough polylactic acid (TPLA), polycarbonates (PC), and nylon most commonly used in additive manufacturing. The creep test specimens are firstly produced with a three-dimensional (3D) printer, and then their final dimensions are given using computer numerical control (CNC) milling. The creep experiments are carried out at three different ambient temperatures (25 °C, 40 °C, and 60 °C) and two different stress levels (10 MPa, 20 MPa). According to the test results, it was determined that the material type, temperature, and loading levels significantly influenced the creep behaviour of the 3D printed polymer materials. UR - https://www.sv-jme.eu/sl/article/short-term-creep-behavior-of-different-polymers-used-in-additive-manufacturing-under-different-thermal-and-loading-conditions/
@article{{sv-jme}{sv-jme.2022.191},
author = {Dogan, O.},
title = {Short-term Creep Behaviour of Different Polymers Used in Additive Manufacturing under Different Thermal and Loading Conditions},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {68},
number = {7-8},
year = {2022},
doi = {10.5545/sv-jme.2022.191},
url = {https://www.sv-jme.eu/sl/article/short-term-creep-behavior-of-different-polymers-used-in-additive-manufacturing-under-different-thermal-and-loading-conditions/}
}
TY - JOUR AU - Dogan, Oguz PY - 2022/06/23 TI - Short-term Creep Behaviour of Different Polymers Used in Additive Manufacturing under Different Thermal and Loading Conditions JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 68, No 7-8 (2022): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2022.191 KW - Additive manufacturing, creep experiments, polymer materials, thermal effect, N2 - Polymer materials produced by additive manufacturing undergo significant changes in their dimensions under continuous loading conditions. This situation affects the operation of polymer structures produced by additive manufacturing within safe limits. Therefore, it is crucial to determine the creep behaviour of polymers produced by the additive manufacturing method. This study investigates the creep behaviour of six different materials, acrylonitrile butadiene styrene (ABS), chlorinated polyethylene (CPE), polylactic acid (PLA), tough polylactic acid (TPLA), polycarbonates (PC), and nylon most commonly used in additive manufacturing. The creep test specimens are firstly produced with a three-dimensional (3D) printer, and then their final dimensions are given using computer numerical control (CNC) milling. The creep experiments are carried out at three different ambient temperatures (25 °C, 40 °C, and 60 °C) and two different stress levels (10 MPa, 20 MPa). According to the test results, it was determined that the material type, temperature, and loading levels significantly influenced the creep behaviour of the 3D printed polymer materials. UR - https://www.sv-jme.eu/sl/article/short-term-creep-behavior-of-different-polymers-used-in-additive-manufacturing-under-different-thermal-and-loading-conditions/
Dogan, Oguz"Short-term Creep Behaviour of Different Polymers Used in Additive Manufacturing under Different Thermal and Loading Conditions" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 68 Number 7-8 (23 June 2022)
Strojniški vestnik - Journal of Mechanical Engineering 68(2022)7-8, 451-460
© The Authors 2022. CC BY 4.0 Int.
Polymer materials produced by additive manufacturing undergo significant changes in their dimensions under continuous loading conditions. This situation affects the operation of polymer structures produced by additive manufacturing within safe limits. Therefore, it is crucial to determine the creep behaviour of polymers produced by the additive manufacturing method. This study investigates the creep behaviour of six different materials, acrylonitrile butadiene styrene (ABS), chlorinated polyethylene (CPE), polylactic acid (PLA), tough polylactic acid (TPLA), polycarbonates (PC), and nylon most commonly used in additive manufacturing. The creep test specimens are firstly produced with a three-dimensional (3D) printer, and then their final dimensions are given using computer numerical control (CNC) milling. The creep experiments are carried out at three different ambient temperatures (25 °C, 40 °C, and 60 °C) and two different stress levels (10 MPa, 20 MPa). According to the test results, it was determined that the material type, temperature, and loading levels significantly influenced the creep behaviour of the 3D printed polymer materials.