GANTAR, Gašper ;STERZING, Andreas . Robust design of forming processes. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 54, n.4, p. 249-257, august 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/robust-design-of-forming-processes/>. Date accessed: 20 dec. 2024. doi:http://dx.doi.org/.
Gantar, G., & Sterzing, A. (2008). Robust design of forming processes. Strojniški vestnik - Journal of Mechanical Engineering, 54(4), 249-257. doi:http://dx.doi.org/
@article{.,
author = {Gašper Gantar and Andreas Sterzing},
title = {Robust design of forming processes},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {54},
number = {4},
year = {2008},
keywords = {forming processes; robust design; numerical simulation; optimization; },
abstract = {Properties of raw materials (sheet metal, bars, etc.) used in forming processes are not constant. Other input parameters of forming system (friction conditions, machine settings, temperature, etc.) also scatter considerably during production. Improvement of production processes has always been an important goal in metal forming industry. The aim is to develop cost effective and stabile forming processes where the number of non-conforming products (scrap) is reduced to the minimum. In the first part of the paper an approach is described which enables the user to predict how the scatter of input parameters would influence the final properties of the products. In the second part of the paper the developed approach is used for optimization of forming process with respect to uncontrollable scatter of input parameters with the aim of minimizing scrap ratio. Optimization is basedon the use of numerical simulations, response surface methodology and stochastic optimization. It can be performed in the early stage of the production process development cycle. The presented approach was successfully applied in industrial environment during development of technology for forming of various work pieces.},
issn = {0039-2480}, pages = {249-257}, doi = {},
url = {https://www.sv-jme.eu/sl/article/robust-design-of-forming-processes/}
}
Gantar, G.,Sterzing, A. 2008 August 54. Robust design of forming processes. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 54:4
%A Gantar, Gašper %A Sterzing, Andreas %D 2008 %T Robust design of forming processes %B 2008 %9 forming processes; robust design; numerical simulation; optimization; %! Robust design of forming processes %K forming processes; robust design; numerical simulation; optimization; %X Properties of raw materials (sheet metal, bars, etc.) used in forming processes are not constant. Other input parameters of forming system (friction conditions, machine settings, temperature, etc.) also scatter considerably during production. Improvement of production processes has always been an important goal in metal forming industry. The aim is to develop cost effective and stabile forming processes where the number of non-conforming products (scrap) is reduced to the minimum. In the first part of the paper an approach is described which enables the user to predict how the scatter of input parameters would influence the final properties of the products. In the second part of the paper the developed approach is used for optimization of forming process with respect to uncontrollable scatter of input parameters with the aim of minimizing scrap ratio. Optimization is basedon the use of numerical simulations, response surface methodology and stochastic optimization. It can be performed in the early stage of the production process development cycle. The presented approach was successfully applied in industrial environment during development of technology for forming of various work pieces. %U https://www.sv-jme.eu/sl/article/robust-design-of-forming-processes/ %0 Journal Article %R %& 249 %P 9 %J Strojniški vestnik - Journal of Mechanical Engineering %V 54 %N 4 %@ 0039-2480 %8 2017-08-21 %7 2017-08-21
Gantar, Gašper, & Andreas Sterzing. "Robust design of forming processes." Strojniški vestnik - Journal of Mechanical Engineering [Online], 54.4 (2008): 249-257. Web. 20 Dec. 2024
TY - JOUR AU - Gantar, Gašper AU - Sterzing, Andreas PY - 2008 TI - Robust design of forming processes JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - forming processes; robust design; numerical simulation; optimization; N2 - Properties of raw materials (sheet metal, bars, etc.) used in forming processes are not constant. Other input parameters of forming system (friction conditions, machine settings, temperature, etc.) also scatter considerably during production. Improvement of production processes has always been an important goal in metal forming industry. The aim is to develop cost effective and stabile forming processes where the number of non-conforming products (scrap) is reduced to the minimum. In the first part of the paper an approach is described which enables the user to predict how the scatter of input parameters would influence the final properties of the products. In the second part of the paper the developed approach is used for optimization of forming process with respect to uncontrollable scatter of input parameters with the aim of minimizing scrap ratio. Optimization is basedon the use of numerical simulations, response surface methodology and stochastic optimization. It can be performed in the early stage of the production process development cycle. The presented approach was successfully applied in industrial environment during development of technology for forming of various work pieces. UR - https://www.sv-jme.eu/sl/article/robust-design-of-forming-processes/
@article{{}{.},
author = {Gantar, G., Sterzing, A.},
title = {Robust design of forming processes},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {54},
number = {4},
year = {2008},
doi = {},
url = {https://www.sv-jme.eu/sl/article/robust-design-of-forming-processes/}
}
TY - JOUR AU - Gantar, Gašper AU - Sterzing, Andreas PY - 2017/08/21 TI - Robust design of forming processes JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 54, No 4 (2008): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - forming processes, robust design, numerical simulation, optimization, N2 - Properties of raw materials (sheet metal, bars, etc.) used in forming processes are not constant. Other input parameters of forming system (friction conditions, machine settings, temperature, etc.) also scatter considerably during production. Improvement of production processes has always been an important goal in metal forming industry. The aim is to develop cost effective and stabile forming processes where the number of non-conforming products (scrap) is reduced to the minimum. In the first part of the paper an approach is described which enables the user to predict how the scatter of input parameters would influence the final properties of the products. In the second part of the paper the developed approach is used for optimization of forming process with respect to uncontrollable scatter of input parameters with the aim of minimizing scrap ratio. Optimization is basedon the use of numerical simulations, response surface methodology and stochastic optimization. It can be performed in the early stage of the production process development cycle. The presented approach was successfully applied in industrial environment during development of technology for forming of various work pieces. UR - https://www.sv-jme.eu/sl/article/robust-design-of-forming-processes/
Gantar, Gašper, AND Sterzing, Andreas. "Robust design of forming processes" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 54 Number 4 (21 August 2017)
Strojniški vestnik - Journal of Mechanical Engineering 54(2008)4, 249-257
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
Properties of raw materials (sheet metal, bars, etc.) used in forming processes are not constant. Other input parameters of forming system (friction conditions, machine settings, temperature, etc.) also scatter considerably during production. Improvement of production processes has always been an important goal in metal forming industry. The aim is to develop cost effective and stabile forming processes where the number of non-conforming products (scrap) is reduced to the minimum. In the first part of the paper an approach is described which enables the user to predict how the scatter of input parameters would influence the final properties of the products. In the second part of the paper the developed approach is used for optimization of forming process with respect to uncontrollable scatter of input parameters with the aim of minimizing scrap ratio. Optimization is basedon the use of numerical simulations, response surface methodology and stochastic optimization. It can be performed in the early stage of the production process development cycle. The presented approach was successfully applied in industrial environment during development of technology for forming of various work pieces.