MU, Mingfei ;XIE, Bowen ;YANG, Yang . Research on Attitude Analysis of Hydraulic Support Based on Column Length. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 70, n.5-6, p. 293-310, april 2024. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/research-on-attitude-analysis-of-hydraulic-support-based-on-column-length/>. Date accessed: 18 jul. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2024.991.
Mu, M., Xie, B., & Yang, Y. (2024). Research on Attitude Analysis of Hydraulic Support Based on Column Length. Strojniški vestnik - Journal of Mechanical Engineering, 70(5-6), 293-310. doi:http://dx.doi.org/10.5545/sv-jme.2024.991
@article{sv-jmesv-jme.2024.991,
author = {Mingfei Mu and Bowen Xie and Yang Yang},
title = {Research on Attitude Analysis of Hydraulic Support Based on Column Length},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {70},
number = {5-6},
year = {2024},
keywords = {analysis of hydraulic support attitude; simulation analysis; axis pin connection clearance; hydraulic cylinder stiffness; },
abstract = {The existing hydraulic support attitude monitoring and control methods integrate multiple sensing technologies, but it is difficult to apply and promote due to unclear monitoring mechanisms, complicated types, and a large number of sensors. Aiming at the problem of attitude monitoring and control of hydraulic support, firstly, the kinematics mathematical model of hydraulic support is established by the key marker point method and the two-dimensional bar system model, and the forward and inverse solution algorithm of hydraulic support attitude based on the double-drive length of front and rear columns is proposed. Secondly, the rigid body dynamics simulation model of hydraulic support is constructed to verify the theoretical analytical model and prove the correctness of the algorithm. The rigid body simulation model can be used as the attitude monitoring system of hydraulic support. Thirdly, considering the influence of material elastic deformation, a rigid-flexible coupling dynamic simulation model of hydraulic support is established to explore the influence of elastic deformation of components on the attitude of hydraulic support and its causes. On this basis, the rigid-flexible coupling dynamic simulation model of the hydraulic support with clearance is established by replacing the revolute pair in the simulation model with the solid axis pin connection unit. The influence of the axis pin connection clearance on the attitude of the hydraulic support and its causes are explored, and the actual attitude and change characteristics of the hydraulic support under simulated real conditions are obtained. Finally, considering the force compression of the hydraulic cylinder of the column, the rigid-flexible and machine-liquid coupling dynamic simulation model of the hydraulic support with clearance is constructed. },
issn = {0039-2480}, pages = {293-310}, doi = {10.5545/sv-jme.2024.991},
url = {https://www.sv-jme.eu/sl/article/research-on-attitude-analysis-of-hydraulic-support-based-on-column-length/}
}
Mu, M.,Xie, B.,Yang, Y. 2024 April 70. Research on Attitude Analysis of Hydraulic Support Based on Column Length. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 70:5-6
%A Mu, Mingfei %A Xie, Bowen %A Yang, Yang %D 2024 %T Research on Attitude Analysis of Hydraulic Support Based on Column Length %B 2024 %9 analysis of hydraulic support attitude; simulation analysis; axis pin connection clearance; hydraulic cylinder stiffness; %! Research on Attitude Analysis of Hydraulic Support Based on Column Length %K analysis of hydraulic support attitude; simulation analysis; axis pin connection clearance; hydraulic cylinder stiffness; %X The existing hydraulic support attitude monitoring and control methods integrate multiple sensing technologies, but it is difficult to apply and promote due to unclear monitoring mechanisms, complicated types, and a large number of sensors. Aiming at the problem of attitude monitoring and control of hydraulic support, firstly, the kinematics mathematical model of hydraulic support is established by the key marker point method and the two-dimensional bar system model, and the forward and inverse solution algorithm of hydraulic support attitude based on the double-drive length of front and rear columns is proposed. Secondly, the rigid body dynamics simulation model of hydraulic support is constructed to verify the theoretical analytical model and prove the correctness of the algorithm. The rigid body simulation model can be used as the attitude monitoring system of hydraulic support. Thirdly, considering the influence of material elastic deformation, a rigid-flexible coupling dynamic simulation model of hydraulic support is established to explore the influence of elastic deformation of components on the attitude of hydraulic support and its causes. On this basis, the rigid-flexible coupling dynamic simulation model of the hydraulic support with clearance is established by replacing the revolute pair in the simulation model with the solid axis pin connection unit. The influence of the axis pin connection clearance on the attitude of the hydraulic support and its causes are explored, and the actual attitude and change characteristics of the hydraulic support under simulated real conditions are obtained. Finally, considering the force compression of the hydraulic cylinder of the column, the rigid-flexible and machine-liquid coupling dynamic simulation model of the hydraulic support with clearance is constructed. %U https://www.sv-jme.eu/sl/article/research-on-attitude-analysis-of-hydraulic-support-based-on-column-length/ %0 Journal Article %R 10.5545/sv-jme.2024.991 %& 293 %P 18 %J Strojniški vestnik - Journal of Mechanical Engineering %V 70 %N 5-6 %@ 0039-2480 %8 2024-04-08 %7 2024-04-08
Mu, Mingfei, Bowen Xie, & Yang Yang. "Research on Attitude Analysis of Hydraulic Support Based on Column Length." Strojniški vestnik - Journal of Mechanical Engineering [Online], 70.5-6 (2024): 293-310. Web. 18 Jul. 2024
TY - JOUR AU - Mu, Mingfei AU - Xie, Bowen AU - Yang, Yang PY - 2024 TI - Research on Attitude Analysis of Hydraulic Support Based on Column Length JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2024.991 KW - analysis of hydraulic support attitude; simulation analysis; axis pin connection clearance; hydraulic cylinder stiffness; N2 - The existing hydraulic support attitude monitoring and control methods integrate multiple sensing technologies, but it is difficult to apply and promote due to unclear monitoring mechanisms, complicated types, and a large number of sensors. Aiming at the problem of attitude monitoring and control of hydraulic support, firstly, the kinematics mathematical model of hydraulic support is established by the key marker point method and the two-dimensional bar system model, and the forward and inverse solution algorithm of hydraulic support attitude based on the double-drive length of front and rear columns is proposed. Secondly, the rigid body dynamics simulation model of hydraulic support is constructed to verify the theoretical analytical model and prove the correctness of the algorithm. The rigid body simulation model can be used as the attitude monitoring system of hydraulic support. Thirdly, considering the influence of material elastic deformation, a rigid-flexible coupling dynamic simulation model of hydraulic support is established to explore the influence of elastic deformation of components on the attitude of hydraulic support and its causes. On this basis, the rigid-flexible coupling dynamic simulation model of the hydraulic support with clearance is established by replacing the revolute pair in the simulation model with the solid axis pin connection unit. The influence of the axis pin connection clearance on the attitude of the hydraulic support and its causes are explored, and the actual attitude and change characteristics of the hydraulic support under simulated real conditions are obtained. Finally, considering the force compression of the hydraulic cylinder of the column, the rigid-flexible and machine-liquid coupling dynamic simulation model of the hydraulic support with clearance is constructed. UR - https://www.sv-jme.eu/sl/article/research-on-attitude-analysis-of-hydraulic-support-based-on-column-length/
@article{{sv-jme}{sv-jme.2024.991},
author = {Mu, M., Xie, B., Yang, Y.},
title = {Research on Attitude Analysis of Hydraulic Support Based on Column Length},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {70},
number = {5-6},
year = {2024},
doi = {10.5545/sv-jme.2024.991},
url = {https://www.sv-jme.eu/sl/article/research-on-attitude-analysis-of-hydraulic-support-based-on-column-length/}
}
TY - JOUR AU - Mu, Mingfei AU - Xie, Bowen AU - Yang, Yang PY - 2024/04/08 TI - Research on Attitude Analysis of Hydraulic Support Based on Column Length JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 70, No 5-6 (2024): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2024.991 KW - analysis of hydraulic support attitude, simulation analysis, axis pin connection clearance, hydraulic cylinder stiffness, N2 - The existing hydraulic support attitude monitoring and control methods integrate multiple sensing technologies, but it is difficult to apply and promote due to unclear monitoring mechanisms, complicated types, and a large number of sensors. Aiming at the problem of attitude monitoring and control of hydraulic support, firstly, the kinematics mathematical model of hydraulic support is established by the key marker point method and the two-dimensional bar system model, and the forward and inverse solution algorithm of hydraulic support attitude based on the double-drive length of front and rear columns is proposed. Secondly, the rigid body dynamics simulation model of hydraulic support is constructed to verify the theoretical analytical model and prove the correctness of the algorithm. The rigid body simulation model can be used as the attitude monitoring system of hydraulic support. Thirdly, considering the influence of material elastic deformation, a rigid-flexible coupling dynamic simulation model of hydraulic support is established to explore the influence of elastic deformation of components on the attitude of hydraulic support and its causes. On this basis, the rigid-flexible coupling dynamic simulation model of the hydraulic support with clearance is established by replacing the revolute pair in the simulation model with the solid axis pin connection unit. The influence of the axis pin connection clearance on the attitude of the hydraulic support and its causes are explored, and the actual attitude and change characteristics of the hydraulic support under simulated real conditions are obtained. Finally, considering the force compression of the hydraulic cylinder of the column, the rigid-flexible and machine-liquid coupling dynamic simulation model of the hydraulic support with clearance is constructed. UR - https://www.sv-jme.eu/sl/article/research-on-attitude-analysis-of-hydraulic-support-based-on-column-length/
Mu, Mingfei, Xie, Bowen, AND Yang, Yang. "Research on Attitude Analysis of Hydraulic Support Based on Column Length" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 70 Number 5-6 (08 April 2024)
Strojniški vestnik - Journal of Mechanical Engineering 70(2024)5-6, 293-310
© The Authors 2024. CC BY 4.0 Int.
The existing hydraulic support attitude monitoring and control methods integrate multiple sensing technologies, but it is difficult to apply and promote due to unclear monitoring mechanisms, complicated types, and a large number of sensors. Aiming at the problem of attitude monitoring and control of hydraulic support, firstly, the kinematics mathematical model of hydraulic support is established by the key marker point method and the two-dimensional bar system model, and the forward and inverse solution algorithm of hydraulic support attitude based on the double-drive length of front and rear columns is proposed. Secondly, the rigid body dynamics simulation model of hydraulic support is constructed to verify the theoretical analytical model and prove the correctness of the algorithm. The rigid body simulation model can be used as the attitude monitoring system of hydraulic support. Thirdly, considering the influence of material elastic deformation, a rigid-flexible coupling dynamic simulation model of hydraulic support is established to explore the influence of elastic deformation of components on the attitude of hydraulic support and its causes. On this basis, the rigid-flexible coupling dynamic simulation model of the hydraulic support with clearance is established by replacing the revolute pair in the simulation model with the solid axis pin connection unit. The influence of the axis pin connection clearance on the attitude of the hydraulic support and its causes are explored, and the actual attitude and change characteristics of the hydraulic support under simulated real conditions are obtained. Finally, considering the force compression of the hydraulic cylinder of the column, the rigid-flexible and machine-liquid coupling dynamic simulation model of the hydraulic support with clearance is constructed.