Possibilities of Using a Modified Pin-on-Disc, Test for Evaluation of Water Soluble Cutting Fluids

ARNŠEK, Aleš ;VIŽINTIN, Jože .
Possibilities of Using a Modified Pin-on-Disc, Test for Evaluation of Water Soluble Cutting Fluids. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 43, n.3-4, p. 103-116, july 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/possibilities-of-using-a-modified-pin-on-disc-test-for-evaluation-of-water-soluble-cutting-fluids/>. Date accessed: 20 dec. 2024. 
doi:http://dx.doi.org/.

Arnšek, A., & Vižintin, J.
(1997).
Possibilities of Using a Modified Pin-on-Disc, Test for Evaluation of Water Soluble Cutting Fluids.
Strojniški vestnik - Journal of Mechanical Engineering, 43(3-4), 103-116.
doi:http://dx.doi.org/

@article{.,
	author = {Aleš  Arnšek and Jože  Vižintin},
	title = {Possibilities of Using a Modified Pin-on-Disc, Test for Evaluation of Water Soluble Cutting Fluids},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {43},
	number = {3-4},
	year = {1997},
	keywords = {emulsions; test fluids; cutting tools; performance evaluation; },
	abstract = {Today ’s water soluble cutting fluids are generally highly developed technical products designed to get the best out of the modern machine tools. The usual approach to estimating the performance of water soluble cutting fluids is normally based upon chemical composition information and full-scale, comparative service tests experience. In this type of tests, performance assignments are semiquantitative at best. In order to overcome this difficulty a modified pin-on-disk test has been acquired to help quantify the performance of water soluble cutting fluids, develop new fluids, and evaluate fluids available on the market-place. In this test the contact conditions in machining are reproduced by letting the pin slide against countermaterial surface. In the present work the possibilities and limitations of using a modified pin-on-disc test for evaluating water soluble cutting fluids are investigated.},
	issn = {0039-2480},	pages = {103-116},	doi = {},
	url = {https://www.sv-jme.eu/sl/article/possibilities-of-using-a-modified-pin-on-disc-test-for-evaluation-of-water-soluble-cutting-fluids/}
}

Arnšek, A.,Vižintin, J.
1997 July 43. Possibilities of Using a Modified Pin-on-Disc, Test for Evaluation of Water Soluble Cutting Fluids. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 43:3-4

%A Arnšek, Aleš 
%A Vižintin, Jože 
%D 1997
%T Possibilities of Using a Modified Pin-on-Disc, Test for Evaluation of Water Soluble Cutting Fluids
%B 1997
%9 emulsions; test fluids; cutting tools; performance evaluation; 
%! Possibilities of Using a Modified Pin-on-Disc, Test for Evaluation of Water Soluble Cutting Fluids
%K emulsions; test fluids; cutting tools; performance evaluation; 
%X Today ’s water soluble cutting fluids are generally highly developed technical products designed to get the best out of the modern machine tools. The usual approach to estimating the performance of water soluble cutting fluids is normally based upon chemical composition information and full-scale, comparative service tests experience. In this type of tests, performance assignments are semiquantitative at best. In order to overcome this difficulty a modified pin-on-disk test has been acquired to help quantify the performance of water soluble cutting fluids, develop new fluids, and evaluate fluids available on the market-place. In this test the contact conditions in machining are reproduced by letting the pin slide against countermaterial surface. In the present work the possibilities and limitations of using a modified pin-on-disc test for evaluating water soluble cutting fluids are investigated.
%U https://www.sv-jme.eu/sl/article/possibilities-of-using-a-modified-pin-on-disc-test-for-evaluation-of-water-soluble-cutting-fluids/
%0 Journal Article
%R 
%& 103
%P 14
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 43
%N 3-4
%@ 0039-2480
%8 2017-07-06
%7 2017-07-06

Arnšek, Aleš, & Jože  Vižintin.
"Possibilities of Using a Modified Pin-on-Disc, Test for Evaluation of Water Soluble Cutting Fluids." Strojniški vestnik - Journal of Mechanical Engineering [Online], 43.3-4 (1997): 103-116. Web.  20 Dec. 2024

TY  - JOUR
AU  - Arnšek, Aleš 
AU  - Vižintin, Jože 
PY  - 1997
TI  - Possibilities of Using a Modified Pin-on-Disc, Test for Evaluation of Water Soluble Cutting Fluids
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - emulsions; test fluids; cutting tools; performance evaluation; 
N2  - Today ’s water soluble cutting fluids are generally highly developed technical products designed to get the best out of the modern machine tools. The usual approach to estimating the performance of water soluble cutting fluids is normally based upon chemical composition information and full-scale, comparative service tests experience. In this type of tests, performance assignments are semiquantitative at best. In order to overcome this difficulty a modified pin-on-disk test has been acquired to help quantify the performance of water soluble cutting fluids, develop new fluids, and evaluate fluids available on the market-place. In this test the contact conditions in machining are reproduced by letting the pin slide against countermaterial surface. In the present work the possibilities and limitations of using a modified pin-on-disc test for evaluating water soluble cutting fluids are investigated.
UR  - https://www.sv-jme.eu/sl/article/possibilities-of-using-a-modified-pin-on-disc-test-for-evaluation-of-water-soluble-cutting-fluids/

@article{{}{.},
	author = {Arnšek, A., Vižintin, J.},
	title = {Possibilities of Using a Modified Pin-on-Disc, Test for Evaluation of Water Soluble Cutting Fluids},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {43},
	number = {3-4},
	year = {1997},
	doi = {},
	url = {https://www.sv-jme.eu/sl/article/possibilities-of-using-a-modified-pin-on-disc-test-for-evaluation-of-water-soluble-cutting-fluids/}
}

TY  - JOUR
AU  - Arnšek, Aleš 
AU  - Vižintin, Jože 
PY  - 2017/07/06
TI  - Possibilities of Using a Modified Pin-on-Disc, Test for Evaluation of Water Soluble Cutting Fluids
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 43, No 3-4 (1997): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - emulsions, test fluids, cutting tools, performance evaluation, 
N2  - Today ’s water soluble cutting fluids are generally highly developed technical products designed to get the best out of the modern machine tools. The usual approach to estimating the performance of water soluble cutting fluids is normally based upon chemical composition information and full-scale, comparative service tests experience. In this type of tests, performance assignments are semiquantitative at best. In order to overcome this difficulty a modified pin-on-disk test has been acquired to help quantify the performance of water soluble cutting fluids, develop new fluids, and evaluate fluids available on the market-place. In this test the contact conditions in machining are reproduced by letting the pin slide against countermaterial surface. In the present work the possibilities and limitations of using a modified pin-on-disc test for evaluating water soluble cutting fluids are investigated.
UR  - https://www.sv-jme.eu/sl/article/possibilities-of-using-a-modified-pin-on-disc-test-for-evaluation-of-water-soluble-cutting-fluids/

Arnšek, Aleš, AND Vižintin, Jože.
"Possibilities of Using a Modified Pin-on-Disc, Test for Evaluation of Water Soluble Cutting Fluids" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 43 Number 3-4 (06 July 2017)