TANOVIC, Ljubodrag ;BOJANIC, Pavao ;PUZOVIC, Radovan ;KLIMENKO, Sergey . Polycrystalline Cubic Boron Nitride (PCBN) Tool Life and Wear in Turning of Amorphous-Crystalline Iron-Based Coatings. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 57, n.12, p. 904-910, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/polycrystalline-cubic-boron-nitride-pcbn-tool-life-and-wear-in-turning-of-amorphous-crystalline-iron-based-coatings/>. Date accessed: 19 nov. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2011.010.
Tanovic, L., Bojanic, P., Puzovic, R., & Klimenko, S. (2011). Polycrystalline Cubic Boron Nitride (PCBN) Tool Life and Wear in Turning of Amorphous-Crystalline Iron-Based Coatings. Strojniški vestnik - Journal of Mechanical Engineering, 57(12), 904-910. doi:http://dx.doi.org/10.5545/sv-jme.2011.010
@article{sv-jmesv-jme.2011.010,
author = {Ljubodrag Tanovic and Pavao Bojanic and Radovan Puzovic and Sergey Klimenko},
title = {Polycrystalline Cubic Boron Nitride (PCBN) Tool Life and Wear in Turning of Amorphous-Crystalline Iron-Based Coatings},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {57},
number = {12},
year = {2011},
keywords = {cutting; tool wear; tool life; amorphous-crystalline coating},
abstract = {The paper presents PCBN-Ciborit cutting tools life and wear test results. The effects of the machining regime when turning amorphous-crystalline Fe80B20 and Fe79Cr16B5 coating systems applied to conventional workpiece materials were assessed. It has been shown that the observed tool wear mechanisms are complex in their character and are dominated by abrasive-mechanical, adhesive and chemical effects in the cutting zone. Under changing turning conditions tool life is affected by the structural-phase composition and by the non-homogeneous structure of the coating. Specifically, when turning gas-flame coatings deposited with a Fe80B20 electrode and electro-arc coatings with a Fe79Cr16B5 electrode the lowest wear and the highest tool life was achieved at cutting speeds of v = 1.1 to 1.2 m/s and a back rake angle of γ = –10º. It has been demonstrated that a change of the back rake angle from γ = 0 to –10º does not have a great effect on tool life contrary to the case with γ = -20º.},
issn = {0039-2480}, pages = {904-910}, doi = {10.5545/sv-jme.2011.010},
url = {https://www.sv-jme.eu/sl/article/polycrystalline-cubic-boron-nitride-pcbn-tool-life-and-wear-in-turning-of-amorphous-crystalline-iron-based-coatings/}
}
Tanovic, L.,Bojanic, P.,Puzovic, R.,Klimenko, S. 2011 June 57. Polycrystalline Cubic Boron Nitride (PCBN) Tool Life and Wear in Turning of Amorphous-Crystalline Iron-Based Coatings. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 57:12
%A Tanovic, Ljubodrag %A Bojanic, Pavao %A Puzovic, Radovan %A Klimenko, Sergey %D 2011 %T Polycrystalline Cubic Boron Nitride (PCBN) Tool Life and Wear in Turning of Amorphous-Crystalline Iron-Based Coatings %B 2011 %9 cutting; tool wear; tool life; amorphous-crystalline coating %! Polycrystalline Cubic Boron Nitride (PCBN) Tool Life and Wear in Turning of Amorphous-Crystalline Iron-Based Coatings %K cutting; tool wear; tool life; amorphous-crystalline coating %X The paper presents PCBN-Ciborit cutting tools life and wear test results. The effects of the machining regime when turning amorphous-crystalline Fe80B20 and Fe79Cr16B5 coating systems applied to conventional workpiece materials were assessed. It has been shown that the observed tool wear mechanisms are complex in their character and are dominated by abrasive-mechanical, adhesive and chemical effects in the cutting zone. Under changing turning conditions tool life is affected by the structural-phase composition and by the non-homogeneous structure of the coating. Specifically, when turning gas-flame coatings deposited with a Fe80B20 electrode and electro-arc coatings with a Fe79Cr16B5 electrode the lowest wear and the highest tool life was achieved at cutting speeds of v = 1.1 to 1.2 m/s and a back rake angle of γ = –10º. It has been demonstrated that a change of the back rake angle from γ = 0 to –10º does not have a great effect on tool life contrary to the case with γ = -20º. %U https://www.sv-jme.eu/sl/article/polycrystalline-cubic-boron-nitride-pcbn-tool-life-and-wear-in-turning-of-amorphous-crystalline-iron-based-coatings/ %0 Journal Article %R 10.5545/sv-jme.2011.010 %& 904 %P 7 %J Strojniški vestnik - Journal of Mechanical Engineering %V 57 %N 12 %@ 0039-2480 %8 2018-06-29 %7 2018-06-29
Tanovic, Ljubodrag, Pavao Bojanic, Radovan Puzovic, & Sergey Klimenko. "Polycrystalline Cubic Boron Nitride (PCBN) Tool Life and Wear in Turning of Amorphous-Crystalline Iron-Based Coatings." Strojniški vestnik - Journal of Mechanical Engineering [Online], 57.12 (2011): 904-910. Web. 19 Nov. 2024
TY - JOUR AU - Tanovic, Ljubodrag AU - Bojanic, Pavao AU - Puzovic, Radovan AU - Klimenko, Sergey PY - 2011 TI - Polycrystalline Cubic Boron Nitride (PCBN) Tool Life and Wear in Turning of Amorphous-Crystalline Iron-Based Coatings JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2011.010 KW - cutting; tool wear; tool life; amorphous-crystalline coating N2 - The paper presents PCBN-Ciborit cutting tools life and wear test results. The effects of the machining regime when turning amorphous-crystalline Fe80B20 and Fe79Cr16B5 coating systems applied to conventional workpiece materials were assessed. It has been shown that the observed tool wear mechanisms are complex in their character and are dominated by abrasive-mechanical, adhesive and chemical effects in the cutting zone. Under changing turning conditions tool life is affected by the structural-phase composition and by the non-homogeneous structure of the coating. Specifically, when turning gas-flame coatings deposited with a Fe80B20 electrode and electro-arc coatings with a Fe79Cr16B5 electrode the lowest wear and the highest tool life was achieved at cutting speeds of v = 1.1 to 1.2 m/s and a back rake angle of γ = –10º. It has been demonstrated that a change of the back rake angle from γ = 0 to –10º does not have a great effect on tool life contrary to the case with γ = -20º. UR - https://www.sv-jme.eu/sl/article/polycrystalline-cubic-boron-nitride-pcbn-tool-life-and-wear-in-turning-of-amorphous-crystalline-iron-based-coatings/
@article{{sv-jme}{sv-jme.2011.010},
author = {Tanovic, L., Bojanic, P., Puzovic, R., Klimenko, S.},
title = {Polycrystalline Cubic Boron Nitride (PCBN) Tool Life and Wear in Turning of Amorphous-Crystalline Iron-Based Coatings},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {57},
number = {12},
year = {2011},
doi = {10.5545/sv-jme.2011.010},
url = {https://www.sv-jme.eu/sl/article/polycrystalline-cubic-boron-nitride-pcbn-tool-life-and-wear-in-turning-of-amorphous-crystalline-iron-based-coatings/}
}
TY - JOUR AU - Tanovic, Ljubodrag AU - Bojanic, Pavao AU - Puzovic, Radovan AU - Klimenko, Sergey PY - 2018/06/29 TI - Polycrystalline Cubic Boron Nitride (PCBN) Tool Life and Wear in Turning of Amorphous-Crystalline Iron-Based Coatings JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 57, No 12 (2011): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2011.010 KW - cutting, tool wear, tool life, amorphous-crystalline coating N2 - The paper presents PCBN-Ciborit cutting tools life and wear test results. The effects of the machining regime when turning amorphous-crystalline Fe80B20 and Fe79Cr16B5 coating systems applied to conventional workpiece materials were assessed. It has been shown that the observed tool wear mechanisms are complex in their character and are dominated by abrasive-mechanical, adhesive and chemical effects in the cutting zone. Under changing turning conditions tool life is affected by the structural-phase composition and by the non-homogeneous structure of the coating. Specifically, when turning gas-flame coatings deposited with a Fe80B20 electrode and electro-arc coatings with a Fe79Cr16B5 electrode the lowest wear and the highest tool life was achieved at cutting speeds of v = 1.1 to 1.2 m/s and a back rake angle of γ = –10º. It has been demonstrated that a change of the back rake angle from γ = 0 to –10º does not have a great effect on tool life contrary to the case with γ = -20º. UR - https://www.sv-jme.eu/sl/article/polycrystalline-cubic-boron-nitride-pcbn-tool-life-and-wear-in-turning-of-amorphous-crystalline-iron-based-coatings/
Tanovic, Ljubodrag, Bojanic, Pavao, Puzovic, Radovan, AND Klimenko, Sergey. "Polycrystalline Cubic Boron Nitride (PCBN) Tool Life and Wear in Turning of Amorphous-Crystalline Iron-Based Coatings" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 57 Number 12 (29 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 57(2011)12, 904-910
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
The paper presents PCBN-Ciborit cutting tools life and wear test results. The effects of the machining regime when turning amorphous-crystalline Fe80B20 and Fe79Cr16B5 coating systems applied to conventional workpiece materials were assessed. It has been shown that the observed tool wear mechanisms are complex in their character and are dominated by abrasive-mechanical, adhesive and chemical effects in the cutting zone. Under changing turning conditions tool life is affected by the structural-phase composition and by the non-homogeneous structure of the coating. Specifically, when turning gas-flame coatings deposited with a Fe80B20 electrode and electro-arc coatings with a Fe79Cr16B5 electrode the lowest wear and the highest tool life was achieved at cutting speeds of v = 1.1 to 1.2 m/s and a back rake angle of γ = –10º. It has been demonstrated that a change of the back rake angle from γ = 0 to –10º does not have a great effect on tool life contrary to the case with γ = -20º.