Point Data Pre-Processing Based on Fuzzy Logic for Reverse Engineering Modelling

BUDAK, Igor ;SOKOVIĆ, Mirko ;KOPAČ, Janez ;HODOLIČ, Janko .
Point Data Pre-Processing Based on Fuzzy Logic for Reverse Engineering Modelling. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 55, n.12, p. 755-765, october 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/point-data-pre-processing-based-on-fuzzy-logic-for-reverse-engineering-modelling/>. Date accessed: 23 nov. 2024. 
doi:http://dx.doi.org/.

Budak, I., Soković, M., Kopač, J., & Hodolič, J.
(2009).
Point Data Pre-Processing Based on Fuzzy Logic for Reverse Engineering Modelling.
Strojniški vestnik - Journal of Mechanical Engineering, 55(12), 755-765.
doi:http://dx.doi.org/

@article{.,
	author = {Igor  Budak and Mirko  Soković and Janez  Kopač and Janko  Hodolič},
	title = {Point Data Pre-Processing Based on Fuzzy Logic for Reverse Engineering Modelling},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {55},
	number = {12},
	year = {2009},
	keywords = {reverse engineering; pre-processing; 3D-digitization; point data reduction; },
	abstract = {State of the art 3D-digitization systems designed for reverse engineering (RE) modelling are characterized by increased scanning speed and also by the possibility to generate a large number of points in a short time. Generally, this improves the efficiency of the RE-modelling process. In practice however, a significant number of points in the stage of the CAD model generation may become an issue. In addition, the 3D-digitization process is often connected with measuring errors because of the properties of measuring systems and/or the object. Therefore, nowadays considerable attention is devoted to the problem of pre-processing the results of 3D-digitization, often by means of tools of artificial intelligence. This paper introduces a pre-processing system based on fuzzy logic, along with the results of its practical application.},
	issn = {0039-2480},	pages = {755-765},	doi = {},
	url = {https://www.sv-jme.eu/sl/article/point-data-pre-processing-based-on-fuzzy-logic-for-reverse-engineering-modelling/}
}

Budak, I.,Soković, M.,Kopač, J.,Hodolič, J.
2009 October 55. Point Data Pre-Processing Based on Fuzzy Logic for Reverse Engineering Modelling. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 55:12

%A Budak, Igor 
%A Soković, Mirko 
%A Kopač, Janez 
%A Hodolič, Janko 
%D 2009
%T Point Data Pre-Processing Based on Fuzzy Logic for Reverse Engineering Modelling
%B 2009
%9 reverse engineering; pre-processing; 3D-digitization; point data reduction; 
%! Point Data Pre-Processing Based on Fuzzy Logic for Reverse Engineering Modelling
%K reverse engineering; pre-processing; 3D-digitization; point data reduction; 
%X State of the art 3D-digitization systems designed for reverse engineering (RE) modelling are characterized by increased scanning speed and also by the possibility to generate a large number of points in a short time. Generally, this improves the efficiency of the RE-modelling process. In practice however, a significant number of points in the stage of the CAD model generation may become an issue. In addition, the 3D-digitization process is often connected with measuring errors because of the properties of measuring systems and/or the object. Therefore, nowadays considerable attention is devoted to the problem of pre-processing the results of 3D-digitization, often by means of tools of artificial intelligence. This paper introduces a pre-processing system based on fuzzy logic, along with the results of its practical application.
%U https://www.sv-jme.eu/sl/article/point-data-pre-processing-based-on-fuzzy-logic-for-reverse-engineering-modelling/
%0 Journal Article
%R 
%& 755
%P 11
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 55
%N 12
%@ 0039-2480
%8 2017-10-24
%7 2017-10-24

Budak, Igor, Mirko  Soković, Janez  Kopač, & Janko  Hodolič.
"Point Data Pre-Processing Based on Fuzzy Logic for Reverse Engineering Modelling." Strojniški vestnik - Journal of Mechanical Engineering [Online], 55.12 (2009): 755-765. Web.  23 Nov. 2024

TY  - JOUR
AU  - Budak, Igor 
AU  - Soković, Mirko 
AU  - Kopač, Janez 
AU  - Hodolič, Janko 
PY  - 2009
TI  - Point Data Pre-Processing Based on Fuzzy Logic for Reverse Engineering Modelling
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - reverse engineering; pre-processing; 3D-digitization; point data reduction; 
N2  - State of the art 3D-digitization systems designed for reverse engineering (RE) modelling are characterized by increased scanning speed and also by the possibility to generate a large number of points in a short time. Generally, this improves the efficiency of the RE-modelling process. In practice however, a significant number of points in the stage of the CAD model generation may become an issue. In addition, the 3D-digitization process is often connected with measuring errors because of the properties of measuring systems and/or the object. Therefore, nowadays considerable attention is devoted to the problem of pre-processing the results of 3D-digitization, often by means of tools of artificial intelligence. This paper introduces a pre-processing system based on fuzzy logic, along with the results of its practical application.
UR  - https://www.sv-jme.eu/sl/article/point-data-pre-processing-based-on-fuzzy-logic-for-reverse-engineering-modelling/

@article{{}{.},
	author = {Budak, I., Soković, M., Kopač, J., Hodolič, J.},
	title = {Point Data Pre-Processing Based on Fuzzy Logic for Reverse Engineering Modelling},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {55},
	number = {12},
	year = {2009},
	doi = {},
	url = {https://www.sv-jme.eu/sl/article/point-data-pre-processing-based-on-fuzzy-logic-for-reverse-engineering-modelling/}
}

TY  - JOUR
AU  - Budak, Igor 
AU  - Soković, Mirko 
AU  - Kopač, Janez 
AU  - Hodolič, Janko 
PY  - 2017/10/24
TI  - Point Data Pre-Processing Based on Fuzzy Logic for Reverse Engineering Modelling
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 55, No 12 (2009): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - reverse engineering, pre-processing, 3D-digitization, point data reduction, 
N2  - State of the art 3D-digitization systems designed for reverse engineering (RE) modelling are characterized by increased scanning speed and also by the possibility to generate a large number of points in a short time. Generally, this improves the efficiency of the RE-modelling process. In practice however, a significant number of points in the stage of the CAD model generation may become an issue. In addition, the 3D-digitization process is often connected with measuring errors because of the properties of measuring systems and/or the object. Therefore, nowadays considerable attention is devoted to the problem of pre-processing the results of 3D-digitization, often by means of tools of artificial intelligence. This paper introduces a pre-processing system based on fuzzy logic, along with the results of its practical application.
UR  - https://www.sv-jme.eu/sl/article/point-data-pre-processing-based-on-fuzzy-logic-for-reverse-engineering-modelling/

Budak, Igor, Soković, Mirko, Kopač, Janez, AND Hodolič, Janko.
"Point Data Pre-Processing Based on Fuzzy Logic for Reverse Engineering Modelling" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 55 Number 12 (24 October 2017)