LI, Xibing ;YU, Zhe ;LI, Xizhao ;LI, Weixiang ;ZOU, Tengyue . Plough-extrusion Forming for Making Micro-groove Heat Pipes on Hydrostatic Thrust Bearings of Heavy Machinery. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 66, n.12, p. 724-735, december 2020. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/plough-extrusion-forming-for-making-micro-groove-heat-pipes-in-inner-holes-of-flat/>. Date accessed: 19 nov. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2020.6910.
Li, X., Yu, Z., Li, X., Li, W., & Zou, T. (2020). Plough-extrusion Forming for Making Micro-groove Heat Pipes on Hydrostatic Thrust Bearings of Heavy Machinery. Strojniški vestnik - Journal of Mechanical Engineering, 66(12), 724-735. doi:http://dx.doi.org/10.5545/sv-jme.2020.6910
@article{sv-jmesv-jme.2020.6910,
author = {Xibing Li and Zhe Yu and Xizhao Li and Weixiang Li and Tengyue Zou},
title = {Plough-extrusion Forming for Making Micro-groove Heat Pipes on Hydrostatic Thrust Bearings of Heavy Machinery},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {66},
number = {12},
year = {2020},
keywords = {heat pipe, heat dissipation, micro-groove, heavy machine},
abstract = {The present paper focuses on the manufacturing of micro-groove heat pipes on hydrostatic thrust bearings of heavy machinery. Special multitooth tools were designed for plough-extrusion forming heat pipes on flat copper. Experimental results were conducted to determine whether the plough-extrusion forming could achieve better performance than traditional wire electrical discharge. Furthermore, the processing using multi-tooth tool with 10 mm length, 55 tooth number, 0.25 mm tooth depth and 0.22 tooth top width was found to achieve the best performance among the six optional tools. The 50 mm/min forming speed was determined to acquire the best surface quality of the microgroove structure. Through heat transfer testing, the theoretical model for a micro-groove heat pipe made by plough-extrusion forming was also verified.},
issn = {0039-2480}, pages = {724-735}, doi = {10.5545/sv-jme.2020.6910},
url = {https://www.sv-jme.eu/sl/article/plough-extrusion-forming-for-making-micro-groove-heat-pipes-in-inner-holes-of-flat/}
}
Li, X.,Yu, Z.,Li, X.,Li, W.,Zou, T. 2020 December 66. Plough-extrusion Forming for Making Micro-groove Heat Pipes on Hydrostatic Thrust Bearings of Heavy Machinery. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 66:12
%A Li, Xibing %A Yu, Zhe %A Li, Xizhao %A Li, Weixiang %A Zou, Tengyue %D 2020 %T Plough-extrusion Forming for Making Micro-groove Heat Pipes on Hydrostatic Thrust Bearings of Heavy Machinery %B 2020 %9 heat pipe, heat dissipation, micro-groove, heavy machine %! Plough-extrusion Forming for Making Micro-groove Heat Pipes on Hydrostatic Thrust Bearings of Heavy Machinery %K heat pipe, heat dissipation, micro-groove, heavy machine %X The present paper focuses on the manufacturing of micro-groove heat pipes on hydrostatic thrust bearings of heavy machinery. Special multitooth tools were designed for plough-extrusion forming heat pipes on flat copper. Experimental results were conducted to determine whether the plough-extrusion forming could achieve better performance than traditional wire electrical discharge. Furthermore, the processing using multi-tooth tool with 10 mm length, 55 tooth number, 0.25 mm tooth depth and 0.22 tooth top width was found to achieve the best performance among the six optional tools. The 50 mm/min forming speed was determined to acquire the best surface quality of the microgroove structure. Through heat transfer testing, the theoretical model for a micro-groove heat pipe made by plough-extrusion forming was also verified. %U https://www.sv-jme.eu/sl/article/plough-extrusion-forming-for-making-micro-groove-heat-pipes-in-inner-holes-of-flat/ %0 Journal Article %R 10.5545/sv-jme.2020.6910 %& 724 %P 12 %J Strojniški vestnik - Journal of Mechanical Engineering %V 66 %N 12 %@ 0039-2480 %8 2020-12-23 %7 2020-12-23
Li, Xibing, Zhe Yu, Xizhao Li, Weixiang Li, & Tengyue Zou. "Plough-extrusion Forming for Making Micro-groove Heat Pipes on Hydrostatic Thrust Bearings of Heavy Machinery." Strojniški vestnik - Journal of Mechanical Engineering [Online], 66.12 (2020): 724-735. Web. 19 Nov. 2024
TY - JOUR AU - Li, Xibing AU - Yu, Zhe AU - Li, Xizhao AU - Li, Weixiang AU - Zou, Tengyue PY - 2020 TI - Plough-extrusion Forming for Making Micro-groove Heat Pipes on Hydrostatic Thrust Bearings of Heavy Machinery JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2020.6910 KW - heat pipe, heat dissipation, micro-groove, heavy machine N2 - The present paper focuses on the manufacturing of micro-groove heat pipes on hydrostatic thrust bearings of heavy machinery. Special multitooth tools were designed for plough-extrusion forming heat pipes on flat copper. Experimental results were conducted to determine whether the plough-extrusion forming could achieve better performance than traditional wire electrical discharge. Furthermore, the processing using multi-tooth tool with 10 mm length, 55 tooth number, 0.25 mm tooth depth and 0.22 tooth top width was found to achieve the best performance among the six optional tools. The 50 mm/min forming speed was determined to acquire the best surface quality of the microgroove structure. Through heat transfer testing, the theoretical model for a micro-groove heat pipe made by plough-extrusion forming was also verified. UR - https://www.sv-jme.eu/sl/article/plough-extrusion-forming-for-making-micro-groove-heat-pipes-in-inner-holes-of-flat/
@article{{sv-jme}{sv-jme.2020.6910},
author = {Li, X., Yu, Z., Li, X., Li, W., Zou, T.},
title = {Plough-extrusion Forming for Making Micro-groove Heat Pipes on Hydrostatic Thrust Bearings of Heavy Machinery},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {66},
number = {12},
year = {2020},
doi = {10.5545/sv-jme.2020.6910},
url = {https://www.sv-jme.eu/sl/article/plough-extrusion-forming-for-making-micro-groove-heat-pipes-in-inner-holes-of-flat/}
}
TY - JOUR AU - Li, Xibing AU - Yu, Zhe AU - Li, Xizhao AU - Li, Weixiang AU - Zou, Tengyue PY - 2020/12/23 TI - Plough-extrusion Forming for Making Micro-groove Heat Pipes on Hydrostatic Thrust Bearings of Heavy Machinery JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 66, No 12 (2020): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2020.6910 KW - heat pipe, heat dissipation, micro-groove, heavy machine N2 - The present paper focuses on the manufacturing of micro-groove heat pipes on hydrostatic thrust bearings of heavy machinery. Special multitooth tools were designed for plough-extrusion forming heat pipes on flat copper. Experimental results were conducted to determine whether the plough-extrusion forming could achieve better performance than traditional wire electrical discharge. Furthermore, the processing using multi-tooth tool with 10 mm length, 55 tooth number, 0.25 mm tooth depth and 0.22 tooth top width was found to achieve the best performance among the six optional tools. The 50 mm/min forming speed was determined to acquire the best surface quality of the microgroove structure. Through heat transfer testing, the theoretical model for a micro-groove heat pipe made by plough-extrusion forming was also verified. UR - https://www.sv-jme.eu/sl/article/plough-extrusion-forming-for-making-micro-groove-heat-pipes-in-inner-holes-of-flat/
Li, Xibing, Yu, Zhe, Li, Xizhao, Li, Weixiang, AND Zou, Tengyue. "Plough-extrusion Forming for Making Micro-groove Heat Pipes on Hydrostatic Thrust Bearings of Heavy Machinery" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 66 Number 12 (23 December 2020)
Strojniški vestnik - Journal of Mechanical Engineering 66(2020)12, 724-735
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
The present paper focuses on the manufacturing of micro-groove heat pipes on hydrostatic thrust bearings of heavy machinery. Special multitooth tools were designed for plough-extrusion forming heat pipes on flat copper. Experimental results were conducted to determine whether the plough-extrusion forming could achieve better performance than traditional wire electrical discharge. Furthermore, the processing using multi-tooth tool with 10 mm length, 55 tooth number, 0.25 mm tooth depth and 0.22 tooth top width was found to achieve the best performance among the six optional tools. The 50 mm/min forming speed was determined to acquire the best surface quality of the microgroove structure. Through heat transfer testing, the theoretical model for a micro-groove heat pipe made by plough-extrusion forming was also verified.