Numerical computation of turbulent conjugate heat transfer in air heater

1895 Ogledov
1371 Prenosov
Izvoz citacije: ABNT
HRIBERŠEK, M. ;ŠIROK, b. ;ŽUNIČ, Z. ;ŠKERGET, L. .
Numerical computation of turbulent conjugate heat transfer in air heater. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 51, n.7-8, p. 470-475, august 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/numerical-computation-of-turbulent-conjugate-heat-transfer-in-air-heater/>. Date accessed: 30 dec. 2024. 
doi:http://dx.doi.org/.
Hriberšek, M., Širok, B., Žunič, Z., & Škerget, L.
(2005).
Numerical computation of turbulent conjugate heat transfer in air heater.
Strojniški vestnik - Journal of Mechanical Engineering, 51(7-8), 470-475.
doi:http://dx.doi.org/
@article{.,
	author = {M.  Hriberšek and b.  Širok and Z.  Žunič and L.  Škerget},
	title = {Numerical computation of turbulent conjugate heat transfer in air heater},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {51},
	number = {7-8},
	year = {2005},
	keywords = {numerical computation; turbulent conjugate; heat transfer; air heater; },
	abstract = {The contribution deals with numerical simulation of conjugate heat transfer in air heater of the laundry dryer. The heat transfer consists of internal heat generation in the electrical heating coils, forced convection from the coils to the air and heat conduction through the metal walls of the heater. In order to simplify the computational mesh the porous media concept was used for discretization of electrical coils. A special attention was given to the selection of a turbulence model, capable of accurate solution of conjugate heat transfer. After extensive testings the SST model, used in the numerical code CFX5, was selected. The computational results were compared with results of velocity and temperature measurements on the device in the laundry dryer, and good agreement was observed.},
	issn = {0039-2480},	pages = {470-475},	doi = {},
	url = {https://www.sv-jme.eu/sl/article/numerical-computation-of-turbulent-conjugate-heat-transfer-in-air-heater/}
}
Hriberšek, M.,Širok, B.,Žunič, Z.,Škerget, L.
2005 August 51. Numerical computation of turbulent conjugate heat transfer in air heater. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 51:7-8
%A Hriberšek, M. 
%A Širok, b. 
%A Žunič, Z. 
%A Škerget, L. 
%D 2005
%T Numerical computation of turbulent conjugate heat transfer in air heater
%B 2005
%9 numerical computation; turbulent conjugate; heat transfer; air heater; 
%! Numerical computation of turbulent conjugate heat transfer in air heater
%K numerical computation; turbulent conjugate; heat transfer; air heater; 
%X The contribution deals with numerical simulation of conjugate heat transfer in air heater of the laundry dryer. The heat transfer consists of internal heat generation in the electrical heating coils, forced convection from the coils to the air and heat conduction through the metal walls of the heater. In order to simplify the computational mesh the porous media concept was used for discretization of electrical coils. A special attention was given to the selection of a turbulence model, capable of accurate solution of conjugate heat transfer. After extensive testings the SST model, used in the numerical code CFX5, was selected. The computational results were compared with results of velocity and temperature measurements on the device in the laundry dryer, and good agreement was observed.
%U https://www.sv-jme.eu/sl/article/numerical-computation-of-turbulent-conjugate-heat-transfer-in-air-heater/
%0 Journal Article
%R 
%& 470
%P 6
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 51
%N 7-8
%@ 0039-2480
%8 2017-08-18
%7 2017-08-18
Hriberšek, M., b.  Širok, Z.  Žunič, & L.  Škerget.
"Numerical computation of turbulent conjugate heat transfer in air heater." Strojniški vestnik - Journal of Mechanical Engineering [Online], 51.7-8 (2005): 470-475. Web.  30 Dec. 2024
TY  - JOUR
AU  - Hriberšek, M. 
AU  - Širok, b. 
AU  - Žunič, Z. 
AU  - Škerget, L. 
PY  - 2005
TI  - Numerical computation of turbulent conjugate heat transfer in air heater
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - numerical computation; turbulent conjugate; heat transfer; air heater; 
N2  - The contribution deals with numerical simulation of conjugate heat transfer in air heater of the laundry dryer. The heat transfer consists of internal heat generation in the electrical heating coils, forced convection from the coils to the air and heat conduction through the metal walls of the heater. In order to simplify the computational mesh the porous media concept was used for discretization of electrical coils. A special attention was given to the selection of a turbulence model, capable of accurate solution of conjugate heat transfer. After extensive testings the SST model, used in the numerical code CFX5, was selected. The computational results were compared with results of velocity and temperature measurements on the device in the laundry dryer, and good agreement was observed.
UR  - https://www.sv-jme.eu/sl/article/numerical-computation-of-turbulent-conjugate-heat-transfer-in-air-heater/
@article{{}{.},
	author = {Hriberšek, M., Širok, B., Žunič, Z., Škerget, L.},
	title = {Numerical computation of turbulent conjugate heat transfer in air heater},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {51},
	number = {7-8},
	year = {2005},
	doi = {},
	url = {https://www.sv-jme.eu/sl/article/numerical-computation-of-turbulent-conjugate-heat-transfer-in-air-heater/}
}
TY  - JOUR
AU  - Hriberšek, M. 
AU  - Širok, b. 
AU  - Žunič, Z. 
AU  - Škerget, L. 
PY  - 2017/08/18
TI  - Numerical computation of turbulent conjugate heat transfer in air heater
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 51, No 7-8 (2005): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - numerical computation, turbulent conjugate, heat transfer, air heater, 
N2  - The contribution deals with numerical simulation of conjugate heat transfer in air heater of the laundry dryer. The heat transfer consists of internal heat generation in the electrical heating coils, forced convection from the coils to the air and heat conduction through the metal walls of the heater. In order to simplify the computational mesh the porous media concept was used for discretization of electrical coils. A special attention was given to the selection of a turbulence model, capable of accurate solution of conjugate heat transfer. After extensive testings the SST model, used in the numerical code CFX5, was selected. The computational results were compared with results of velocity and temperature measurements on the device in the laundry dryer, and good agreement was observed.
UR  - https://www.sv-jme.eu/sl/article/numerical-computation-of-turbulent-conjugate-heat-transfer-in-air-heater/
Hriberšek, M., Širok, b., Žunič, Z., AND Škerget, L..
"Numerical computation of turbulent conjugate heat transfer in air heater" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 51 Number 7-8 (18 August 2017)

Avtorji

Inštitucije

  • Faculty of mechanical engineering, Maribor, Slovenia
  • Turboinštitut, Ljubljana, Slovenija
  • Faculty of mechanical engineering, Maribor, Slovenia
  • Turboinštitut, Ljubljana, Slovenija

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 51(2005)7-8, 470-475
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

The contribution deals with numerical simulation of conjugate heat transfer in air heater of the laundry dryer. The heat transfer consists of internal heat generation in the electrical heating coils, forced convection from the coils to the air and heat conduction through the metal walls of the heater. In order to simplify the computational mesh the porous media concept was used for discretization of electrical coils. A special attention was given to the selection of a turbulence model, capable of accurate solution of conjugate heat transfer. After extensive testings the SST model, used in the numerical code CFX5, was selected. The computational results were compared with results of velocity and temperature measurements on the device in the laundry dryer, and good agreement was observed.

numerical computation; turbulent conjugate; heat transfer; air heater;