JERMAK, Czeslaw Janusz. Methods of Shaping the Metrological Characteristics of Air Gages. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 56, n.6, p. 385-390, october 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/methods-of-shaping-the-metrological-characteristics-of-air-gages/>. Date accessed: 19 nov. 2024. doi:http://dx.doi.org/.
Jermak, C. (2010). Methods of Shaping the Metrological Characteristics of Air Gages. Strojniški vestnik - Journal of Mechanical Engineering, 56(6), 385-390. doi:http://dx.doi.org/
@article{.,
author = {Czeslaw Janusz Jermak},
title = {Methods of Shaping the Metrological Characteristics of Air Gages},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {56},
number = {6},
year = {2010},
keywords = {air gauge; dimensional measurement; metrology; uncertainty; static matrological properties; },
abstract = {The paper presents the results of investigations on the influence of most important geometrical parameters on the metrological properties of the air gauges. Among others, the diameters of the inlet and measuring nozzles were taken into consideration, as well as the normalized outer diameter of the measuring nozzle. The influence of the ratio of measuring nozzle to inlet nozzle on the metrological properties. In the analysis, the following features were taken into consideration: measuring range of the air gauge, multiplication and the initial slot width corresponding with the beginning of measuring range. As a result of investigation, some recommendations on the air gauge choice dependent on the particular measuring task are presented in the final part of the paper. },
issn = {0039-2480}, pages = {385-390}, doi = {},
url = {https://www.sv-jme.eu/sl/article/methods-of-shaping-the-metrological-characteristics-of-air-gages/}
}
Jermak, C. 2010 October 56. Methods of Shaping the Metrological Characteristics of Air Gages. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 56:6
%A Jermak, Czeslaw Janusz %D 2010 %T Methods of Shaping the Metrological Characteristics of Air Gages %B 2010 %9 air gauge; dimensional measurement; metrology; uncertainty; static matrological properties; %! Methods of Shaping the Metrological Characteristics of Air Gages %K air gauge; dimensional measurement; metrology; uncertainty; static matrological properties; %X The paper presents the results of investigations on the influence of most important geometrical parameters on the metrological properties of the air gauges. Among others, the diameters of the inlet and measuring nozzles were taken into consideration, as well as the normalized outer diameter of the measuring nozzle. The influence of the ratio of measuring nozzle to inlet nozzle on the metrological properties. In the analysis, the following features were taken into consideration: measuring range of the air gauge, multiplication and the initial slot width corresponding with the beginning of measuring range. As a result of investigation, some recommendations on the air gauge choice dependent on the particular measuring task are presented in the final part of the paper. %U https://www.sv-jme.eu/sl/article/methods-of-shaping-the-metrological-characteristics-of-air-gages/ %0 Journal Article %R %& 385 %P 6 %J Strojniški vestnik - Journal of Mechanical Engineering %V 56 %N 6 %@ 0039-2480 %8 2017-10-24 %7 2017-10-24
Jermak, Czeslaw. "Methods of Shaping the Metrological Characteristics of Air Gages." Strojniški vestnik - Journal of Mechanical Engineering [Online], 56.6 (2010): 385-390. Web. 19 Nov. 2024
TY - JOUR AU - Jermak, Czeslaw Janusz PY - 2010 TI - Methods of Shaping the Metrological Characteristics of Air Gages JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - air gauge; dimensional measurement; metrology; uncertainty; static matrological properties; N2 - The paper presents the results of investigations on the influence of most important geometrical parameters on the metrological properties of the air gauges. Among others, the diameters of the inlet and measuring nozzles were taken into consideration, as well as the normalized outer diameter of the measuring nozzle. The influence of the ratio of measuring nozzle to inlet nozzle on the metrological properties. In the analysis, the following features were taken into consideration: measuring range of the air gauge, multiplication and the initial slot width corresponding with the beginning of measuring range. As a result of investigation, some recommendations on the air gauge choice dependent on the particular measuring task are presented in the final part of the paper. UR - https://www.sv-jme.eu/sl/article/methods-of-shaping-the-metrological-characteristics-of-air-gages/
@article{{}{.},
author = {Jermak, C.},
title = {Methods of Shaping the Metrological Characteristics of Air Gages},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {56},
number = {6},
year = {2010},
doi = {},
url = {https://www.sv-jme.eu/sl/article/methods-of-shaping-the-metrological-characteristics-of-air-gages/}
}
TY - JOUR AU - Jermak, Czeslaw Janusz PY - 2017/10/24 TI - Methods of Shaping the Metrological Characteristics of Air Gages JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 56, No 6 (2010): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - air gauge, dimensional measurement, metrology, uncertainty, static matrological properties, N2 - The paper presents the results of investigations on the influence of most important geometrical parameters on the metrological properties of the air gauges. Among others, the diameters of the inlet and measuring nozzles were taken into consideration, as well as the normalized outer diameter of the measuring nozzle. The influence of the ratio of measuring nozzle to inlet nozzle on the metrological properties. In the analysis, the following features were taken into consideration: measuring range of the air gauge, multiplication and the initial slot width corresponding with the beginning of measuring range. As a result of investigation, some recommendations on the air gauge choice dependent on the particular measuring task are presented in the final part of the paper. UR - https://www.sv-jme.eu/sl/article/methods-of-shaping-the-metrological-characteristics-of-air-gages/
Jermak, Czeslaw"Methods of Shaping the Metrological Characteristics of Air Gages" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 56 Number 6 (24 October 2017)
Strojniški vestnik - Journal of Mechanical Engineering 56(2010)6, 385-390
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
The paper presents the results of investigations on the influence of most important geometrical parameters on the metrological properties of the air gauges. Among others, the diameters of the inlet and measuring nozzles were taken into consideration, as well as the normalized outer diameter of the measuring nozzle. The influence of the ratio of measuring nozzle to inlet nozzle on the metrological properties. In the analysis, the following features were taken into consideration: measuring range of the air gauge, multiplication and the initial slot width corresponding with the beginning of measuring range. As a result of investigation, some recommendations on the air gauge choice dependent on the particular measuring task are presented in the final part of the paper.