ILIĆ, Uroš ;BJASIĆ, Ivan . Measurements of the Point of Porosity in Rubber. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 43, n.7-8, p. 351-362, november 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/measurements-of-the-point-of-porosity-in-rubber/>. Date accessed: 31 aug. 2024. doi:http://dx.doi.org/.
Ilić, U., & Bjasić, I. (1997). Measurements of the Point of Porosity in Rubber. Strojniški vestnik - Journal of Mechanical Engineering, 43(7-8), 351-362. doi:http://dx.doi.org/
@article{., author = {Uroš Ilić and Ivan Bjasić}, title = {Measurements of the Point of Porosity in Rubber}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {43}, number = {7-8}, year = {1997}, keywords = {rubber; temperature measurement; porosity; numerical method; }, abstract = {The vulcanization of a green tyre in a press requires knowledge of temperature and pressure fields in the heated up green tyre itself and its surroundings as well. Due to the fact that each green tyre is composed of different rubber compounds with different vulcanization properties one should know when the most critical spot of a green tyre is vulcanized enough so that the tyre can be removed from a press and the components of different compounds remain homogenous despite the reduced pressure. The paper describes the new method for determination of the minimum level of compound vulcanization and defines the influence of the most important physical values which will cause the greatest systematic and random measurement errors when measuring the minimum of vulcanization. The example presented shows the connection between the measured minimum vulcanization level and the measured rheologic properties of a compound.}, issn = {0039-2480}, pages = {351-362}, doi = {}, url = {https://www.sv-jme.eu/sl/article/measurements-of-the-point-of-porosity-in-rubber/} }
Ilić, U.,Bjasić, I. 1997 November 43. Measurements of the Point of Porosity in Rubber. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 43:7-8
%A Ilić, Uroš %A Bjasić, Ivan %D 1997 %T Measurements of the Point of Porosity in Rubber %B 1997 %9 rubber; temperature measurement; porosity; numerical method; %! Measurements of the Point of Porosity in Rubber %K rubber; temperature measurement; porosity; numerical method; %X The vulcanization of a green tyre in a press requires knowledge of temperature and pressure fields in the heated up green tyre itself and its surroundings as well. Due to the fact that each green tyre is composed of different rubber compounds with different vulcanization properties one should know when the most critical spot of a green tyre is vulcanized enough so that the tyre can be removed from a press and the components of different compounds remain homogenous despite the reduced pressure. The paper describes the new method for determination of the minimum level of compound vulcanization and defines the influence of the most important physical values which will cause the greatest systematic and random measurement errors when measuring the minimum of vulcanization. The example presented shows the connection between the measured minimum vulcanization level and the measured rheologic properties of a compound. %U https://www.sv-jme.eu/sl/article/measurements-of-the-point-of-porosity-in-rubber/ %0 Journal Article %R %& 351 %P 12 %J Strojniški vestnik - Journal of Mechanical Engineering %V 43 %N 7-8 %@ 0039-2480 %8 2017-11-11 %7 2017-11-11
Ilić, Uroš, & Ivan Bjasić. "Measurements of the Point of Porosity in Rubber." Strojniški vestnik - Journal of Mechanical Engineering [Online], 43.7-8 (1997): 351-362. Web. 31 Aug. 2024
TY - JOUR AU - Ilić, Uroš AU - Bjasić, Ivan PY - 1997 TI - Measurements of the Point of Porosity in Rubber JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - rubber; temperature measurement; porosity; numerical method; N2 - The vulcanization of a green tyre in a press requires knowledge of temperature and pressure fields in the heated up green tyre itself and its surroundings as well. Due to the fact that each green tyre is composed of different rubber compounds with different vulcanization properties one should know when the most critical spot of a green tyre is vulcanized enough so that the tyre can be removed from a press and the components of different compounds remain homogenous despite the reduced pressure. The paper describes the new method for determination of the minimum level of compound vulcanization and defines the influence of the most important physical values which will cause the greatest systematic and random measurement errors when measuring the minimum of vulcanization. The example presented shows the connection between the measured minimum vulcanization level and the measured rheologic properties of a compound. UR - https://www.sv-jme.eu/sl/article/measurements-of-the-point-of-porosity-in-rubber/
@article{{}{.}, author = {Ilić, U., Bjasić, I.}, title = {Measurements of the Point of Porosity in Rubber}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {43}, number = {7-8}, year = {1997}, doi = {}, url = {https://www.sv-jme.eu/sl/article/measurements-of-the-point-of-porosity-in-rubber/} }
TY - JOUR AU - Ilić, Uroš AU - Bjasić, Ivan PY - 2017/11/11 TI - Measurements of the Point of Porosity in Rubber JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 43, No 7-8 (1997): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - rubber, temperature measurement, porosity, numerical method, N2 - The vulcanization of a green tyre in a press requires knowledge of temperature and pressure fields in the heated up green tyre itself and its surroundings as well. Due to the fact that each green tyre is composed of different rubber compounds with different vulcanization properties one should know when the most critical spot of a green tyre is vulcanized enough so that the tyre can be removed from a press and the components of different compounds remain homogenous despite the reduced pressure. The paper describes the new method for determination of the minimum level of compound vulcanization and defines the influence of the most important physical values which will cause the greatest systematic and random measurement errors when measuring the minimum of vulcanization. The example presented shows the connection between the measured minimum vulcanization level and the measured rheologic properties of a compound. UR - https://www.sv-jme.eu/sl/article/measurements-of-the-point-of-porosity-in-rubber/
Ilić, Uroš, AND Bjasić, Ivan. "Measurements of the Point of Porosity in Rubber" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 43 Number 7-8 (11 November 2017)
Strojniški vestnik - Journal of Mechanical Engineering 43(1997)7-8, 351-362
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
The vulcanization of a green tyre in a press requires knowledge of temperature and pressure fields in the heated up green tyre itself and its surroundings as well. Due to the fact that each green tyre is composed of different rubber compounds with different vulcanization properties one should know when the most critical spot of a green tyre is vulcanized enough so that the tyre can be removed from a press and the components of different compounds remain homogenous despite the reduced pressure. The paper describes the new method for determination of the minimum level of compound vulcanization and defines the influence of the most important physical values which will cause the greatest systematic and random measurement errors when measuring the minimum of vulcanization. The example presented shows the connection between the measured minimum vulcanization level and the measured rheologic properties of a compound.