ŠUŠTERŠIČ, Borivoj ;KOSEC, Ladislav ;DOLINŠEK, Slavko . Machinability of hot-Pressed Self-Lubricating Fe-MnS and Fe-MoS2 Composites. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 46, n.2, p. 90-102, july 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/machinability-of-hot-pressed-self-lubricating-fe-mns-and-fe-mos2-composites/>. Date accessed: 19 nov. 2024. doi:http://dx.doi.org/.
Šušteršič, B., Kosec, L., & Dolinšek, S. (2000). Machinability of hot-Pressed Self-Lubricating Fe-MnS and Fe-MoS2 Composites. Strojniški vestnik - Journal of Mechanical Engineering, 46(2), 90-102. doi:http://dx.doi.org/
@article{.,
author = {Borivoj Šušteršič and Ladislav Kosec and Slavko Dolinšek},
title = {Machinability of hot-Pressed Self-Lubricating Fe-MnS and Fe-MoS2 Composites},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {46},
number = {2},
year = {2000},
keywords = {Self lubricating composites; Fe-based composites; machinability; cutting forces; },
abstract = {In addition to the standardised tribological tests for determination of the coefficient of friction and wear at the sliding contacts under exactly defined testing conditions, the measured magnitudes of cutting forces can also be used as a measure for the self-lubrication of the composites produced. Such data are most commonly used as a measure for the machinability characteristics of a particular material. The paper presents the results of the synthesis of a Fe-MnS and Fe-MoS2, composites produced with the process of hot-pressing. The microstructural properties are related with the values of the cutting forces which were measured during the longitudinal turning porcess.},
issn = {0039-2480}, pages = {90-102}, doi = {},
url = {https://www.sv-jme.eu/sl/article/machinability-of-hot-pressed-self-lubricating-fe-mns-and-fe-mos2-composites/}
}
Šušteršič, B.,Kosec, L.,Dolinšek, S. 2000 July 46. Machinability of hot-Pressed Self-Lubricating Fe-MnS and Fe-MoS2 Composites. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 46:2
%A Šušteršič, Borivoj %A Kosec, Ladislav %A Dolinšek, Slavko %D 2000 %T Machinability of hot-Pressed Self-Lubricating Fe-MnS and Fe-MoS2 Composites %B 2000 %9 Self lubricating composites; Fe-based composites; machinability; cutting forces; %! Machinability of hot-Pressed Self-Lubricating Fe-MnS and Fe-MoS2 Composites %K Self lubricating composites; Fe-based composites; machinability; cutting forces; %X In addition to the standardised tribological tests for determination of the coefficient of friction and wear at the sliding contacts under exactly defined testing conditions, the measured magnitudes of cutting forces can also be used as a measure for the self-lubrication of the composites produced. Such data are most commonly used as a measure for the machinability characteristics of a particular material. The paper presents the results of the synthesis of a Fe-MnS and Fe-MoS2, composites produced with the process of hot-pressing. The microstructural properties are related with the values of the cutting forces which were measured during the longitudinal turning porcess. %U https://www.sv-jme.eu/sl/article/machinability-of-hot-pressed-self-lubricating-fe-mns-and-fe-mos2-composites/ %0 Journal Article %R %& 90 %P 13 %J Strojniški vestnik - Journal of Mechanical Engineering %V 46 %N 2 %@ 0039-2480 %8 2017-07-07 %7 2017-07-07
Šušteršič, Borivoj, Ladislav Kosec, & Slavko Dolinšek. "Machinability of hot-Pressed Self-Lubricating Fe-MnS and Fe-MoS2 Composites." Strojniški vestnik - Journal of Mechanical Engineering [Online], 46.2 (2000): 90-102. Web. 19 Nov. 2024
TY - JOUR AU - Šušteršič, Borivoj AU - Kosec, Ladislav AU - Dolinšek, Slavko PY - 2000 TI - Machinability of hot-Pressed Self-Lubricating Fe-MnS and Fe-MoS2 Composites JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - Self lubricating composites; Fe-based composites; machinability; cutting forces; N2 - In addition to the standardised tribological tests for determination of the coefficient of friction and wear at the sliding contacts under exactly defined testing conditions, the measured magnitudes of cutting forces can also be used as a measure for the self-lubrication of the composites produced. Such data are most commonly used as a measure for the machinability characteristics of a particular material. The paper presents the results of the synthesis of a Fe-MnS and Fe-MoS2, composites produced with the process of hot-pressing. The microstructural properties are related with the values of the cutting forces which were measured during the longitudinal turning porcess. UR - https://www.sv-jme.eu/sl/article/machinability-of-hot-pressed-self-lubricating-fe-mns-and-fe-mos2-composites/
@article{{}{.},
author = {Šušteršič, B., Kosec, L., Dolinšek, S.},
title = {Machinability of hot-Pressed Self-Lubricating Fe-MnS and Fe-MoS2 Composites},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {46},
number = {2},
year = {2000},
doi = {},
url = {https://www.sv-jme.eu/sl/article/machinability-of-hot-pressed-self-lubricating-fe-mns-and-fe-mos2-composites/}
}
TY - JOUR AU - Šušteršič, Borivoj AU - Kosec, Ladislav AU - Dolinšek, Slavko PY - 2017/07/07 TI - Machinability of hot-Pressed Self-Lubricating Fe-MnS and Fe-MoS2 Composites JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 46, No 2 (2000): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - Self lubricating composites, Fe-based composites, machinability, cutting forces, N2 - In addition to the standardised tribological tests for determination of the coefficient of friction and wear at the sliding contacts under exactly defined testing conditions, the measured magnitudes of cutting forces can also be used as a measure for the self-lubrication of the composites produced. Such data are most commonly used as a measure for the machinability characteristics of a particular material. The paper presents the results of the synthesis of a Fe-MnS and Fe-MoS2, composites produced with the process of hot-pressing. The microstructural properties are related with the values of the cutting forces which were measured during the longitudinal turning porcess. UR - https://www.sv-jme.eu/sl/article/machinability-of-hot-pressed-self-lubricating-fe-mns-and-fe-mos2-composites/
Šušteršič, Borivoj, Kosec, Ladislav, AND Dolinšek, Slavko. "Machinability of hot-Pressed Self-Lubricating Fe-MnS and Fe-MoS2 Composites" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 46 Number 2 (07 July 2017)
Strojniški vestnik - Journal of Mechanical Engineering 46(2000)2, 90-102
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
In addition to the standardised tribological tests for determination of the coefficient of friction and wear at the sliding contacts under exactly defined testing conditions, the measured magnitudes of cutting forces can also be used as a measure for the self-lubrication of the composites produced. Such data are most commonly used as a measure for the machinability characteristics of a particular material. The paper presents the results of the synthesis of a Fe-MnS and Fe-MoS2, composites produced with the process of hot-pressing. The microstructural properties are related with the values of the cutting forces which were measured during the longitudinal turning porcess.