Influence of the waste oil concentration in water on the efficiency of the aeration process in refinery wastewater treatment

PAVLOVIĆ, Milan ;STANOJEVIĆ, Miroslav ;ŠEVALJEVIĆ, Mirjana ;SIMIĆ, Stojan .
Influence of the waste oil concentration in water on the efficiency of the aeration process in refinery wastewater treatment. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 54, n.10, p. 675-684, august 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/influence-of-the-waste-oil-concentration-in-water-on-the-efficiency-of-the-aeration-process-in-refinery-wastewater-treatment/>. Date accessed: 20 dec. 2024. 
doi:http://dx.doi.org/.

Pavlović, M., Stanojević, M., Ševaljević, M., & Simić, S.
(2008).
Influence of the waste oil concentration in water on the efficiency of the aeration process in refinery wastewater treatment.
Strojniški vestnik - Journal of Mechanical Engineering, 54(10), 675-684.
doi:http://dx.doi.org/

@article{.,
	author = {Milan  Pavlović and Miroslav  Stanojević and Mirjana  Ševaljević and Stojan  Simić},
	title = {Influence of the waste oil concentration in water on the efficiency of the aeration process in refinery wastewater treatment},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {54},
	number = {10},
	year = {2008},
	keywords = {aeration system; refinery wastewater treatment; oxigen transport; relaxation processes; },
	abstract = {Process, aeration system and aeration method for biological treatment of wastewater with activated sludge in bio-aeration tanks are chosen based on theflow parameters, composition of the wastewater and required characteristicsof the purified water. Choosing an aeration system is a very complex question, as the capacity of oxygen introduced into the wastewater should correspond to the oxygen consumption in order to achieve the most efficient purification. This paper presents the results of experimental aeration analysis of water contaminated with waste motor oil with variations of airflow introduced into the water. The processes of clean water aeration and water with different oil content (mass concentration from 5 to 10 mg/L). The purpose of these investigations performed on an experimental setup were analysis of the aeration process technical indicators in correlation with the thermodynamic and kinetic parameters, related to the presence of oil in the water in order to achieve more efficient refinery wastewater purification.},
	issn = {0039-2480},	pages = {675-684},	doi = {},
	url = {https://www.sv-jme.eu/sl/article/influence-of-the-waste-oil-concentration-in-water-on-the-efficiency-of-the-aeration-process-in-refinery-wastewater-treatment/}
}

Pavlović, M.,Stanojević, M.,Ševaljević, M.,Simić, S.
2008 August 54. Influence of the waste oil concentration in water on the efficiency of the aeration process in refinery wastewater treatment. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 54:10

%A Pavlović, Milan 
%A Stanojević, Miroslav 
%A Ševaljević, Mirjana 
%A Simić, Stojan 
%D 2008
%T Influence of the waste oil concentration in water on the efficiency of the aeration process in refinery wastewater treatment
%B 2008
%9 aeration system; refinery wastewater treatment; oxigen transport; relaxation processes; 
%! Influence of the waste oil concentration in water on the efficiency of the aeration process in refinery wastewater treatment
%K aeration system; refinery wastewater treatment; oxigen transport; relaxation processes; 
%X Process, aeration system and aeration method for biological treatment of wastewater with activated sludge in bio-aeration tanks are chosen based on theflow parameters, composition of the wastewater and required characteristicsof the purified water. Choosing an aeration system is a very complex question, as the capacity of oxygen introduced into the wastewater should correspond to the oxygen consumption in order to achieve the most efficient purification. This paper presents the results of experimental aeration analysis of water contaminated with waste motor oil with variations of airflow introduced into the water. The processes of clean water aeration and water with different oil content (mass concentration from 5 to 10 mg/L). The purpose of these investigations performed on an experimental setup were analysis of the aeration process technical indicators in correlation with the thermodynamic and kinetic parameters, related to the presence of oil in the water in order to achieve more efficient refinery wastewater purification.
%U https://www.sv-jme.eu/sl/article/influence-of-the-waste-oil-concentration-in-water-on-the-efficiency-of-the-aeration-process-in-refinery-wastewater-treatment/
%0 Journal Article
%R 
%& 675
%P 10
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 54
%N 10
%@ 0039-2480
%8 2017-08-21
%7 2017-08-21

Pavlović, Milan, Miroslav  Stanojević, Mirjana  Ševaljević, & Stojan  Simić.
"Influence of the waste oil concentration in water on the efficiency of the aeration process in refinery wastewater treatment." Strojniški vestnik - Journal of Mechanical Engineering [Online], 54.10 (2008): 675-684. Web.  20 Dec. 2024

TY  - JOUR
AU  - Pavlović, Milan 
AU  - Stanojević, Miroslav 
AU  - Ševaljević, Mirjana 
AU  - Simić, Stojan 
PY  - 2008
TI  - Influence of the waste oil concentration in water on the efficiency of the aeration process in refinery wastewater treatment
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - aeration system; refinery wastewater treatment; oxigen transport; relaxation processes; 
N2  - Process, aeration system and aeration method for biological treatment of wastewater with activated sludge in bio-aeration tanks are chosen based on theflow parameters, composition of the wastewater and required characteristicsof the purified water. Choosing an aeration system is a very complex question, as the capacity of oxygen introduced into the wastewater should correspond to the oxygen consumption in order to achieve the most efficient purification. This paper presents the results of experimental aeration analysis of water contaminated with waste motor oil with variations of airflow introduced into the water. The processes of clean water aeration and water with different oil content (mass concentration from 5 to 10 mg/L). The purpose of these investigations performed on an experimental setup were analysis of the aeration process technical indicators in correlation with the thermodynamic and kinetic parameters, related to the presence of oil in the water in order to achieve more efficient refinery wastewater purification.
UR  - https://www.sv-jme.eu/sl/article/influence-of-the-waste-oil-concentration-in-water-on-the-efficiency-of-the-aeration-process-in-refinery-wastewater-treatment/

@article{{}{.},
	author = {Pavlović, M., Stanojević, M., Ševaljević, M., Simić, S.},
	title = {Influence of the waste oil concentration in water on the efficiency of the aeration process in refinery wastewater treatment},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {54},
	number = {10},
	year = {2008},
	doi = {},
	url = {https://www.sv-jme.eu/sl/article/influence-of-the-waste-oil-concentration-in-water-on-the-efficiency-of-the-aeration-process-in-refinery-wastewater-treatment/}
}

TY  - JOUR
AU  - Pavlović, Milan 
AU  - Stanojević, Miroslav 
AU  - Ševaljević, Mirjana 
AU  - Simić, Stojan 
PY  - 2017/08/21
TI  - Influence of the waste oil concentration in water on the efficiency of the aeration process in refinery wastewater treatment
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 54, No 10 (2008): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - aeration system, refinery wastewater treatment, oxigen transport, relaxation processes, 
N2  - Process, aeration system and aeration method for biological treatment of wastewater with activated sludge in bio-aeration tanks are chosen based on theflow parameters, composition of the wastewater and required characteristicsof the purified water. Choosing an aeration system is a very complex question, as the capacity of oxygen introduced into the wastewater should correspond to the oxygen consumption in order to achieve the most efficient purification. This paper presents the results of experimental aeration analysis of water contaminated with waste motor oil with variations of airflow introduced into the water. The processes of clean water aeration and water with different oil content (mass concentration from 5 to 10 mg/L). The purpose of these investigations performed on an experimental setup were analysis of the aeration process technical indicators in correlation with the thermodynamic and kinetic parameters, related to the presence of oil in the water in order to achieve more efficient refinery wastewater purification.
UR  - https://www.sv-jme.eu/sl/article/influence-of-the-waste-oil-concentration-in-water-on-the-efficiency-of-the-aeration-process-in-refinery-wastewater-treatment/

Pavlović, Milan, Stanojević, Miroslav, Ševaljević, Mirjana, AND Simić, Stojan.
"Influence of the waste oil concentration in water on the efficiency of the aeration process in refinery wastewater treatment" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 54 Number 10 (21 August 2017)