MARČIČ, Simon ;SEME, Sebastijan ;SALAMUNIĆ, Julijan Jan;PRAUNSEIS, Zdravko ;PEHAN, Stanislav . Heating by Flat Plate Collector Combined with a Heat Pump. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 64, n.10, p. 590-600, september 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/heating-by-flat-plate-collector-combined-with-a-heat-pump/>. Date accessed: 20 dec. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2018.5371.
Marčič, S., Seme, S., Salamunić, J., Praunseis, Z., & Pehan, S. (2018). Heating by Flat Plate Collector Combined with a Heat Pump. Strojniški vestnik - Journal of Mechanical Engineering, 64(10), 590-600. doi:http://dx.doi.org/10.5545/sv-jme.2018.5371
@article{sv-jmesv-jme.2018.5371,
author = {Simon Marčič and Sebastijan Seme and Julijan Jan Salamunić and Zdravko Praunseis and Stanislav Pehan},
title = {Heating by Flat Plate Collector Combined with a Heat Pump},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {64},
number = {10},
year = {2018},
keywords = {flat plate collector, heat pump, the coefficient of performance, test rig},
abstract = {The aim of the research was to establish the efficiency of the combination flat plate collector-heat pump versus ambient air-heat pump. The extensive measurements were carried out and analysed of the flat plate collector alone and combination flat plate collector-heat pump. In the beginning, the heat pump introduction into the serial combination with flat plate collectors was analysed. The appropriate test rig with measurement equipment was designed and built. The test rig base consisted of the flat plate collector, heat pump, and 300 l boiler that was a replacement for a house`s heating. Detailed temperature measurements were performed during rainy, sunny and cloudy weather in summer and winter. To estimate the efficiency of heating, the consumed electric energy versus heat is the universal criterion that is derived from the Coefficient of performance (COP), which is calculated on the basis of measured temperatures. The comparison of the calculated COP for the combination flat plate collector-heat pump and the air-water heat pump shows that the largest increase of the COP of the combination flat plate collector-heat pump in comparison with the air-water heat pump is on sunny winter days, and that it amounts to 38 %. In rainy and cloudy weather, the COP of the flat plate collector-heat pump combination is lower than the air-water heat pump COP. The presented analyses clearly indicated that use of the flat plate collector is limited.},
issn = {0039-2480}, pages = {590-600}, doi = {10.5545/sv-jme.2018.5371},
url = {https://www.sv-jme.eu/sl/article/heating-by-flat-plate-collector-combined-with-a-heat-pump/}
}
Marčič, S.,Seme, S.,Salamunić, J.,Praunseis, Z.,Pehan, S. 2018 September 64. Heating by Flat Plate Collector Combined with a Heat Pump. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 64:10
%A Marčič, Simon %A Seme, Sebastijan %A Salamunić, Julijan Jan %A Praunseis, Zdravko %A Pehan, Stanislav %D 2018 %T Heating by Flat Plate Collector Combined with a Heat Pump %B 2018 %9 flat plate collector, heat pump, the coefficient of performance, test rig %! Heating by Flat Plate Collector Combined with a Heat Pump %K flat plate collector, heat pump, the coefficient of performance, test rig %X The aim of the research was to establish the efficiency of the combination flat plate collector-heat pump versus ambient air-heat pump. The extensive measurements were carried out and analysed of the flat plate collector alone and combination flat plate collector-heat pump. In the beginning, the heat pump introduction into the serial combination with flat plate collectors was analysed. The appropriate test rig with measurement equipment was designed and built. The test rig base consisted of the flat plate collector, heat pump, and 300 l boiler that was a replacement for a house`s heating. Detailed temperature measurements were performed during rainy, sunny and cloudy weather in summer and winter. To estimate the efficiency of heating, the consumed electric energy versus heat is the universal criterion that is derived from the Coefficient of performance (COP), which is calculated on the basis of measured temperatures. The comparison of the calculated COP for the combination flat plate collector-heat pump and the air-water heat pump shows that the largest increase of the COP of the combination flat plate collector-heat pump in comparison with the air-water heat pump is on sunny winter days, and that it amounts to 38 %. In rainy and cloudy weather, the COP of the flat plate collector-heat pump combination is lower than the air-water heat pump COP. The presented analyses clearly indicated that use of the flat plate collector is limited. %U https://www.sv-jme.eu/sl/article/heating-by-flat-plate-collector-combined-with-a-heat-pump/ %0 Journal Article %R 10.5545/sv-jme.2018.5371 %& 590 %P 11 %J Strojniški vestnik - Journal of Mechanical Engineering %V 64 %N 10 %@ 0039-2480 %8 2018-09-20 %7 2018-09-20
Marčič, Simon, Sebastijan Seme, Julijan Jan Salamunić, Zdravko Praunseis, & Stanislav Pehan. "Heating by Flat Plate Collector Combined with a Heat Pump." Strojniški vestnik - Journal of Mechanical Engineering [Online], 64.10 (2018): 590-600. Web. 20 Dec. 2024
TY - JOUR AU - Marčič, Simon AU - Seme, Sebastijan AU - Salamunić, Julijan Jan AU - Praunseis, Zdravko AU - Pehan, Stanislav PY - 2018 TI - Heating by Flat Plate Collector Combined with a Heat Pump JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2018.5371 KW - flat plate collector, heat pump, the coefficient of performance, test rig N2 - The aim of the research was to establish the efficiency of the combination flat plate collector-heat pump versus ambient air-heat pump. The extensive measurements were carried out and analysed of the flat plate collector alone and combination flat plate collector-heat pump. In the beginning, the heat pump introduction into the serial combination with flat plate collectors was analysed. The appropriate test rig with measurement equipment was designed and built. The test rig base consisted of the flat plate collector, heat pump, and 300 l boiler that was a replacement for a house`s heating. Detailed temperature measurements were performed during rainy, sunny and cloudy weather in summer and winter. To estimate the efficiency of heating, the consumed electric energy versus heat is the universal criterion that is derived from the Coefficient of performance (COP), which is calculated on the basis of measured temperatures. The comparison of the calculated COP for the combination flat plate collector-heat pump and the air-water heat pump shows that the largest increase of the COP of the combination flat plate collector-heat pump in comparison with the air-water heat pump is on sunny winter days, and that it amounts to 38 %. In rainy and cloudy weather, the COP of the flat plate collector-heat pump combination is lower than the air-water heat pump COP. The presented analyses clearly indicated that use of the flat plate collector is limited. UR - https://www.sv-jme.eu/sl/article/heating-by-flat-plate-collector-combined-with-a-heat-pump/
@article{{sv-jme}{sv-jme.2018.5371},
author = {Marčič, S., Seme, S., Salamunić, J., Praunseis, Z., Pehan, S.},
title = {Heating by Flat Plate Collector Combined with a Heat Pump},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {64},
number = {10},
year = {2018},
doi = {10.5545/sv-jme.2018.5371},
url = {https://www.sv-jme.eu/sl/article/heating-by-flat-plate-collector-combined-with-a-heat-pump/}
}
TY - JOUR AU - Marčič, Simon AU - Seme, Sebastijan AU - Salamunić, Julijan Jan AU - Praunseis, Zdravko AU - Pehan, Stanislav PY - 2018/09/20 TI - Heating by Flat Plate Collector Combined with a Heat Pump JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 64, No 10 (2018): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2018.5371 KW - flat plate collector, heat pump, the coefficient of performance, test rig N2 - The aim of the research was to establish the efficiency of the combination flat plate collector-heat pump versus ambient air-heat pump. The extensive measurements were carried out and analysed of the flat plate collector alone and combination flat plate collector-heat pump. In the beginning, the heat pump introduction into the serial combination with flat plate collectors was analysed. The appropriate test rig with measurement equipment was designed and built. The test rig base consisted of the flat plate collector, heat pump, and 300 l boiler that was a replacement for a house`s heating. Detailed temperature measurements were performed during rainy, sunny and cloudy weather in summer and winter. To estimate the efficiency of heating, the consumed electric energy versus heat is the universal criterion that is derived from the Coefficient of performance (COP), which is calculated on the basis of measured temperatures. The comparison of the calculated COP for the combination flat plate collector-heat pump and the air-water heat pump shows that the largest increase of the COP of the combination flat plate collector-heat pump in comparison with the air-water heat pump is on sunny winter days, and that it amounts to 38 %. In rainy and cloudy weather, the COP of the flat plate collector-heat pump combination is lower than the air-water heat pump COP. The presented analyses clearly indicated that use of the flat plate collector is limited. UR - https://www.sv-jme.eu/sl/article/heating-by-flat-plate-collector-combined-with-a-heat-pump/
Marčič, Simon, Seme, Sebastijan, Salamunić, Julijan, Praunseis, Zdravko, AND Pehan, Stanislav. "Heating by Flat Plate Collector Combined with a Heat Pump" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 64 Number 10 (20 September 2018)
Strojniški vestnik - Journal of Mechanical Engineering 64(2018)10, 590-600
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
The aim of the research was to establish the efficiency of the combination flat plate collector-heat pump versus ambient air-heat pump. The extensive measurements were carried out and analysed of the flat plate collector alone and combination flat plate collector-heat pump. In the beginning, the heat pump introduction into the serial combination with flat plate collectors was analysed. The appropriate test rig with measurement equipment was designed and built. The test rig base consisted of the flat plate collector, heat pump, and 300 l boiler that was a replacement for a house`s heating. Detailed temperature measurements were performed during rainy, sunny and cloudy weather in summer and winter. To estimate the efficiency of heating, the consumed electric energy versus heat is the universal criterion that is derived from the Coefficient of performance (COP), which is calculated on the basis of measured temperatures. The comparison of the calculated COP for the combination flat plate collector-heat pump and the air-water heat pump shows that the largest increase of the COP of the combination flat plate collector-heat pump in comparison with the air-water heat pump is on sunny winter days, and that it amounts to 38 %. In rainy and cloudy weather, the COP of the flat plate collector-heat pump combination is lower than the air-water heat pump COP. The presented analyses clearly indicated that use of the flat plate collector is limited.