Frictional Conditions of AA5251 Aluminium Alloy Sheets Using Drawbead Simulator Tests and Numerical Methods

TRZEPIECIŃSKI, Tomasz ;LEMU, Hirpa G..
Frictional Conditions of AA5251 Aluminium Alloy Sheets Using Drawbead Simulator Tests and Numerical Methods. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 60, n.1, p. 51-60, june 2018. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/frictional-conditions-of-aa5251-aluminium-alloy-sheets-using-drawbead-simulator-tests-and-numerical-methods/>. Date accessed: 20 dec. 2024. 
doi:http://dx.doi.org/10.5545/sv-jme.2013.1310.

Trzepieciński, T., & Lemu, H.
(2014).
Frictional Conditions of AA5251 Aluminium Alloy Sheets Using Drawbead Simulator Tests and Numerical Methods.
Strojniški vestnik - Journal of Mechanical Engineering, 60(1), 51-60.
doi:http://dx.doi.org/10.5545/sv-jme.2013.1310

@article{sv-jmesv-jme.2013.1310,
	author = {Tomasz  Trzepieciński and Hirpa G. Lemu},
	title = {Frictional Conditions of AA5251 Aluminium Alloy Sheets Using Drawbead Simulator Tests and Numerical Methods},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {60},
	number = {1},
	year = {2014},
	keywords = {Coefficient of friction, drawbead, FEM simulation, friction, sheet metal forming},
	abstract = {This article presents research results on the effect of sheet metal surface roughness, lubricant conditions and sample orientation on the value of friction coefficient in the drawbead region of sheet metal-forming processes. Aluminium alloys with different temper conditions were used as test materials. The experimental results have ascertained several relationships showing the effect of surface profile and lubrication on the value of the friction coefficient. Based on experimental measurements, it may be concluded that the sample orientation and the lubrication conditions are crucial variables influencing the value of the coefficient of friction. Furthermore, a numerical model of the drawbead has been created in Msc.MARC Mentat software, and several simulations have been performed to study the stress/strain state in stretched sample during drawbead simulator tests. Both isotropic and anisotropic material models were used in the simulations taking into account the sample orientation with respect to the rolling direction of the sheet.},
	issn = {0039-2480},	pages = {51-60},	doi = {10.5545/sv-jme.2013.1310},
	url = {https://www.sv-jme.eu/sl/article/frictional-conditions-of-aa5251-aluminium-alloy-sheets-using-drawbead-simulator-tests-and-numerical-methods/}
}

Trzepieciński, T.,Lemu, H.
2014 June 60. Frictional Conditions of AA5251 Aluminium Alloy Sheets Using Drawbead Simulator Tests and Numerical Methods. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 60:1

%A Trzepieciński, Tomasz 
%A Lemu, Hirpa G.
%D 2014
%T Frictional Conditions of AA5251 Aluminium Alloy Sheets Using Drawbead Simulator Tests and Numerical Methods
%B 2014
%9 Coefficient of friction, drawbead, FEM simulation, friction, sheet metal forming
%! Frictional Conditions of AA5251 Aluminium Alloy Sheets Using Drawbead Simulator Tests and Numerical Methods
%K Coefficient of friction, drawbead, FEM simulation, friction, sheet metal forming
%X This article presents research results on the effect of sheet metal surface roughness, lubricant conditions and sample orientation on the value of friction coefficient in the drawbead region of sheet metal-forming processes. Aluminium alloys with different temper conditions were used as test materials. The experimental results have ascertained several relationships showing the effect of surface profile and lubrication on the value of the friction coefficient. Based on experimental measurements, it may be concluded that the sample orientation and the lubrication conditions are crucial variables influencing the value of the coefficient of friction. Furthermore, a numerical model of the drawbead has been created in Msc.MARC Mentat software, and several simulations have been performed to study the stress/strain state in stretched sample during drawbead simulator tests. Both isotropic and anisotropic material models were used in the simulations taking into account the sample orientation with respect to the rolling direction of the sheet.
%U https://www.sv-jme.eu/sl/article/frictional-conditions-of-aa5251-aluminium-alloy-sheets-using-drawbead-simulator-tests-and-numerical-methods/
%0 Journal Article
%R 10.5545/sv-jme.2013.1310
%& 51
%P 10
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 60
%N 1
%@ 0039-2480
%8 2018-06-28
%7 2018-06-28

Trzepieciński, Tomasz, & Hirpa G. Lemu.
"Frictional Conditions of AA5251 Aluminium Alloy Sheets Using Drawbead Simulator Tests and Numerical Methods." Strojniški vestnik - Journal of Mechanical Engineering [Online], 60.1 (2014): 51-60. Web.  20 Dec. 2024

TY  - JOUR
AU  - Trzepieciński, Tomasz 
AU  - Lemu, Hirpa G.
PY  - 2014
TI  - Frictional Conditions of AA5251 Aluminium Alloy Sheets Using Drawbead Simulator Tests and Numerical Methods
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2013.1310
KW  - Coefficient of friction, drawbead, FEM simulation, friction, sheet metal forming
N2  - This article presents research results on the effect of sheet metal surface roughness, lubricant conditions and sample orientation on the value of friction coefficient in the drawbead region of sheet metal-forming processes. Aluminium alloys with different temper conditions were used as test materials. The experimental results have ascertained several relationships showing the effect of surface profile and lubrication on the value of the friction coefficient. Based on experimental measurements, it may be concluded that the sample orientation and the lubrication conditions are crucial variables influencing the value of the coefficient of friction. Furthermore, a numerical model of the drawbead has been created in Msc.MARC Mentat software, and several simulations have been performed to study the stress/strain state in stretched sample during drawbead simulator tests. Both isotropic and anisotropic material models were used in the simulations taking into account the sample orientation with respect to the rolling direction of the sheet.
UR  - https://www.sv-jme.eu/sl/article/frictional-conditions-of-aa5251-aluminium-alloy-sheets-using-drawbead-simulator-tests-and-numerical-methods/

@article{{sv-jme}{sv-jme.2013.1310},
	author = {Trzepieciński, T., Lemu, H.},
	title = {Frictional Conditions of AA5251 Aluminium Alloy Sheets Using Drawbead Simulator Tests and Numerical Methods},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {60},
	number = {1},
	year = {2014},
	doi = {10.5545/sv-jme.2013.1310},
	url = {https://www.sv-jme.eu/sl/article/frictional-conditions-of-aa5251-aluminium-alloy-sheets-using-drawbead-simulator-tests-and-numerical-methods/}
}

TY  - JOUR
AU  - Trzepieciński, Tomasz 
AU  - Lemu, Hirpa G.
PY  - 2018/06/28
TI  - Frictional Conditions of AA5251 Aluminium Alloy Sheets Using Drawbead Simulator Tests and Numerical Methods
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 60, No 1 (2014): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2013.1310
KW  - Coefficient of friction, drawbead, FEM simulation, friction, sheet metal forming
N2  - This article presents research results on the effect of sheet metal surface roughness, lubricant conditions and sample orientation on the value of friction coefficient in the drawbead region of sheet metal-forming processes. Aluminium alloys with different temper conditions were used as test materials. The experimental results have ascertained several relationships showing the effect of surface profile and lubrication on the value of the friction coefficient. Based on experimental measurements, it may be concluded that the sample orientation and the lubrication conditions are crucial variables influencing the value of the coefficient of friction. Furthermore, a numerical model of the drawbead has been created in Msc.MARC Mentat software, and several simulations have been performed to study the stress/strain state in stretched sample during drawbead simulator tests. Both isotropic and anisotropic material models were used in the simulations taking into account the sample orientation with respect to the rolling direction of the sheet.
UR  - https://www.sv-jme.eu/sl/article/frictional-conditions-of-aa5251-aluminium-alloy-sheets-using-drawbead-simulator-tests-and-numerical-methods/

Trzepieciński, Tomasz, AND Lemu, Hirpa.
"Frictional Conditions of AA5251 Aluminium Alloy Sheets Using Drawbead Simulator Tests and Numerical Methods" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 60 Number 1 (28 June 2018)