GALOVIĆ, Antun ;ANDRASSY, Mladen ;ŽIVIĆ, Marija . Entropy Analysis of Parallel-Flow Heat Exchangers. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 49, n.2, p. 100-110, july 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/entropy-analysis-of-parallel-flow-heat-exchangers/>. Date accessed: 19 nov. 2024. doi:http://dx.doi.org/.
Galović, A., Andrassy, M., & Živić, M. (2003). Entropy Analysis of Parallel-Flow Heat Exchangers. Strojniški vestnik - Journal of Mechanical Engineering, 49(2), 100-110. doi:http://dx.doi.org/
@article{.,
author = {Antun Galović and Mladen Andrassy and Marija Živić},
title = {Entropy Analysis of Parallel-Flow Heat Exchangers},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {49},
number = {2},
year = {2003},
keywords = {heat exchangers; entropy generation; effectiveness; analytical solutions; },
abstract = {The entropy generation in a parall-flow recuperative heat exchanger is analysed in this paper. During the operation of a heat exchanger two sources of entropy generation normally exist: the pressure drop (friction) source and the heat-exchange source. Here, only the heat-exchange source is considered. The analysis is performed using an analytical mathematical model and the same non-dimensional numbers that were introduced into the energy analysis of heat exchangers by Bonjakoviæ, many years ago. The influence of the individual non-dimensional variables (the operating points of the parallel-flow heat exchanger) on the entropy generation is quantified. The results are presented non-dimensionally in diagrams, which gives them a more universal meaning. Special conditions, i.e. the boundary operating conditions, of the parallelflow recuperator, which are identical to those for counter-flow and cross-flow exchangers, are also discussed.},
issn = {0039-2480}, pages = {100-110}, doi = {},
url = {https://www.sv-jme.eu/sl/article/entropy-analysis-of-parallel-flow-heat-exchangers/}
}
Galović, A.,Andrassy, M.,Živić, M. 2003 July 49. Entropy Analysis of Parallel-Flow Heat Exchangers. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 49:2
%A Galović, Antun %A Andrassy, Mladen %A Živić, Marija %D 2003 %T Entropy Analysis of Parallel-Flow Heat Exchangers %B 2003 %9 heat exchangers; entropy generation; effectiveness; analytical solutions; %! Entropy Analysis of Parallel-Flow Heat Exchangers %K heat exchangers; entropy generation; effectiveness; analytical solutions; %X The entropy generation in a parall-flow recuperative heat exchanger is analysed in this paper. During the operation of a heat exchanger two sources of entropy generation normally exist: the pressure drop (friction) source and the heat-exchange source. Here, only the heat-exchange source is considered. The analysis is performed using an analytical mathematical model and the same non-dimensional numbers that were introduced into the energy analysis of heat exchangers by Bonjakoviæ, many years ago. The influence of the individual non-dimensional variables (the operating points of the parallel-flow heat exchanger) on the entropy generation is quantified. The results are presented non-dimensionally in diagrams, which gives them a more universal meaning. Special conditions, i.e. the boundary operating conditions, of the parallelflow recuperator, which are identical to those for counter-flow and cross-flow exchangers, are also discussed. %U https://www.sv-jme.eu/sl/article/entropy-analysis-of-parallel-flow-heat-exchangers/ %0 Journal Article %R %& 100 %P 11 %J Strojniški vestnik - Journal of Mechanical Engineering %V 49 %N 2 %@ 0039-2480 %8 2017-07-07 %7 2017-07-07
Galović, Antun, Mladen Andrassy, & Marija Živić. "Entropy Analysis of Parallel-Flow Heat Exchangers." Strojniški vestnik - Journal of Mechanical Engineering [Online], 49.2 (2003): 100-110. Web. 19 Nov. 2024
TY - JOUR AU - Galović, Antun AU - Andrassy, Mladen AU - Živić, Marija PY - 2003 TI - Entropy Analysis of Parallel-Flow Heat Exchangers JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - heat exchangers; entropy generation; effectiveness; analytical solutions; N2 - The entropy generation in a parall-flow recuperative heat exchanger is analysed in this paper. During the operation of a heat exchanger two sources of entropy generation normally exist: the pressure drop (friction) source and the heat-exchange source. Here, only the heat-exchange source is considered. The analysis is performed using an analytical mathematical model and the same non-dimensional numbers that were introduced into the energy analysis of heat exchangers by Bonjakoviæ, many years ago. The influence of the individual non-dimensional variables (the operating points of the parallel-flow heat exchanger) on the entropy generation is quantified. The results are presented non-dimensionally in diagrams, which gives them a more universal meaning. Special conditions, i.e. the boundary operating conditions, of the parallelflow recuperator, which are identical to those for counter-flow and cross-flow exchangers, are also discussed. UR - https://www.sv-jme.eu/sl/article/entropy-analysis-of-parallel-flow-heat-exchangers/
@article{{}{.},
author = {Galović, A., Andrassy, M., Živić, M.},
title = {Entropy Analysis of Parallel-Flow Heat Exchangers},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {49},
number = {2},
year = {2003},
doi = {},
url = {https://www.sv-jme.eu/sl/article/entropy-analysis-of-parallel-flow-heat-exchangers/}
}
TY - JOUR AU - Galović, Antun AU - Andrassy, Mladen AU - Živić, Marija PY - 2017/07/07 TI - Entropy Analysis of Parallel-Flow Heat Exchangers JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 49, No 2 (2003): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - heat exchangers, entropy generation, effectiveness, analytical solutions, N2 - The entropy generation in a parall-flow recuperative heat exchanger is analysed in this paper. During the operation of a heat exchanger two sources of entropy generation normally exist: the pressure drop (friction) source and the heat-exchange source. Here, only the heat-exchange source is considered. The analysis is performed using an analytical mathematical model and the same non-dimensional numbers that were introduced into the energy analysis of heat exchangers by Bonjakoviæ, many years ago. The influence of the individual non-dimensional variables (the operating points of the parallel-flow heat exchanger) on the entropy generation is quantified. The results are presented non-dimensionally in diagrams, which gives them a more universal meaning. Special conditions, i.e. the boundary operating conditions, of the parallelflow recuperator, which are identical to those for counter-flow and cross-flow exchangers, are also discussed. UR - https://www.sv-jme.eu/sl/article/entropy-analysis-of-parallel-flow-heat-exchangers/
Galović, Antun, Andrassy, Mladen, AND Živić, Marija. "Entropy Analysis of Parallel-Flow Heat Exchangers" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 49 Number 2 (07 July 2017)
Strojniški vestnik - Journal of Mechanical Engineering 49(2003)2, 100-110
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
The entropy generation in a parall-flow recuperative heat exchanger is analysed in this paper. During the operation of a heat exchanger two sources of entropy generation normally exist: the pressure drop (friction) source and the heat-exchange source. Here, only the heat-exchange source is considered. The analysis is performed using an analytical mathematical model and the same non-dimensional numbers that were introduced into the energy analysis of heat exchangers by Bonjakoviæ, many years ago. The influence of the individual non-dimensional variables (the operating points of the parallel-flow heat exchanger) on the entropy generation is quantified. The results are presented non-dimensionally in diagrams, which gives them a more universal meaning. Special conditions, i.e. the boundary operating conditions, of the parallelflow recuperator, which are identical to those for counter-flow and cross-flow exchangers, are also discussed.