Control of the Cutting Forces in Turning by Entry Angle and Cutting Inserts Geometry

2216 Ogledov
1373 Prenosov
Izvoz citacije: ABNT
UDILJAK, Toma ;ŠKORIĆ, Stephan ;CIGLAR, Damir .
Control of the Cutting Forces in Turning by Entry Angle and Cutting Inserts Geometry. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 54, n.1, p. 56-61, november 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/control-of-the-cutting-forces-in-turning-by-entry-angle-and-cutting-inserts-geometr/>. Date accessed: 23 dec. 2024. 
doi:http://dx.doi.org/.
Udiljak, T., Škorić, S., & Ciglar, D.
(2008).
Control of the Cutting Forces in Turning by Entry Angle and Cutting Inserts Geometry.
Strojniški vestnik - Journal of Mechanical Engineering, 54(1), 56-61.
doi:http://dx.doi.org/
@article{.,
	author = {Toma  Udiljak and Stephan  Škorić and Damir  Ciglar},
	title = {Control of the Cutting Forces in Turning by Entry Angle and Cutting Inserts Geometry},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {54},
	number = {1},
	year = {2008},
	keywords = {turning; cutting forces; cutting tool inserts; inserts geometry; },
	abstract = {Machinability is assessed by a set of criteria or machinability functions, the knowledge of which is needed in optimising the machining process. New cutting tool materials and new concepts of the machine tools provide new possibilities and cause quantitative changes in machinability functions. This research has studied the cutting forces function, as one of the crucial machinability functions. The research was done at longitudinal turning of steel 16MnCr5. Coated carbide inserts for roughing and finishing with different inclination angles were used, and tool clamping system has enabled the changes of entry angle. Obtained results confirm that entry angle and geometry of cutting insert significantly influence cutting forces especially thrust cutting force.},
	issn = {0039-2480},	pages = {56-61},	doi = {},
	url = {https://www.sv-jme.eu/sl/article/control-of-the-cutting-forces-in-turning-by-entry-angle-and-cutting-inserts-geometr/}
}
Udiljak, T.,Škorić, S.,Ciglar, D.
2008 November 54. Control of the Cutting Forces in Turning by Entry Angle and Cutting Inserts Geometry. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 54:1
%A Udiljak, Toma 
%A Škorić, Stephan 
%A Ciglar, Damir 
%D 2008
%T Control of the Cutting Forces in Turning by Entry Angle and Cutting Inserts Geometry
%B 2008
%9 turning; cutting forces; cutting tool inserts; inserts geometry; 
%! Control of the Cutting Forces in Turning by Entry Angle and Cutting Inserts Geometry
%K turning; cutting forces; cutting tool inserts; inserts geometry; 
%X Machinability is assessed by a set of criteria or machinability functions, the knowledge of which is needed in optimising the machining process. New cutting tool materials and new concepts of the machine tools provide new possibilities and cause quantitative changes in machinability functions. This research has studied the cutting forces function, as one of the crucial machinability functions. The research was done at longitudinal turning of steel 16MnCr5. Coated carbide inserts for roughing and finishing with different inclination angles were used, and tool clamping system has enabled the changes of entry angle. Obtained results confirm that entry angle and geometry of cutting insert significantly influence cutting forces especially thrust cutting force.
%U https://www.sv-jme.eu/sl/article/control-of-the-cutting-forces-in-turning-by-entry-angle-and-cutting-inserts-geometr/
%0 Journal Article
%R 
%& 56
%P 6
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 54
%N 1
%@ 0039-2480
%8 2017-11-03
%7 2017-11-03
Udiljak, Toma, Stephan  Škorić, & Damir  Ciglar.
"Control of the Cutting Forces in Turning by Entry Angle and Cutting Inserts Geometry." Strojniški vestnik - Journal of Mechanical Engineering [Online], 54.1 (2008): 56-61. Web.  23 Dec. 2024
TY  - JOUR
AU  - Udiljak, Toma 
AU  - Škorić, Stephan 
AU  - Ciglar, Damir 
PY  - 2008
TI  - Control of the Cutting Forces in Turning by Entry Angle and Cutting Inserts Geometry
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - turning; cutting forces; cutting tool inserts; inserts geometry; 
N2  - Machinability is assessed by a set of criteria or machinability functions, the knowledge of which is needed in optimising the machining process. New cutting tool materials and new concepts of the machine tools provide new possibilities and cause quantitative changes in machinability functions. This research has studied the cutting forces function, as one of the crucial machinability functions. The research was done at longitudinal turning of steel 16MnCr5. Coated carbide inserts for roughing and finishing with different inclination angles were used, and tool clamping system has enabled the changes of entry angle. Obtained results confirm that entry angle and geometry of cutting insert significantly influence cutting forces especially thrust cutting force.
UR  - https://www.sv-jme.eu/sl/article/control-of-the-cutting-forces-in-turning-by-entry-angle-and-cutting-inserts-geometr/
@article{{}{.},
	author = {Udiljak, T., Škorić, S., Ciglar, D.},
	title = {Control of the Cutting Forces in Turning by Entry Angle and Cutting Inserts Geometry},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {54},
	number = {1},
	year = {2008},
	doi = {},
	url = {https://www.sv-jme.eu/sl/article/control-of-the-cutting-forces-in-turning-by-entry-angle-and-cutting-inserts-geometr/}
}
TY  - JOUR
AU  - Udiljak, Toma 
AU  - Škorić, Stephan 
AU  - Ciglar, Damir 
PY  - 2017/11/03
TI  - Control of the Cutting Forces in Turning by Entry Angle and Cutting Inserts Geometry
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 54, No 1 (2008): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - turning, cutting forces, cutting tool inserts, inserts geometry, 
N2  - Machinability is assessed by a set of criteria or machinability functions, the knowledge of which is needed in optimising the machining process. New cutting tool materials and new concepts of the machine tools provide new possibilities and cause quantitative changes in machinability functions. This research has studied the cutting forces function, as one of the crucial machinability functions. The research was done at longitudinal turning of steel 16MnCr5. Coated carbide inserts for roughing and finishing with different inclination angles were used, and tool clamping system has enabled the changes of entry angle. Obtained results confirm that entry angle and geometry of cutting insert significantly influence cutting forces especially thrust cutting force.
UR  - https://www.sv-jme.eu/sl/article/control-of-the-cutting-forces-in-turning-by-entry-angle-and-cutting-inserts-geometr/
Udiljak, Toma, Škorić, Stephan, AND Ciglar, Damir.
"Control of the Cutting Forces in Turning by Entry Angle and Cutting Inserts Geometry" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 54 Number 1 (03 November 2017)

Avtorji

Inštitucije

  • University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Croatia
  • University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Croatia
  • University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Croatia

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 54(2008)1, 56-61
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

Machinability is assessed by a set of criteria or machinability functions, the knowledge of which is needed in optimising the machining process. New cutting tool materials and new concepts of the machine tools provide new possibilities and cause quantitative changes in machinability functions. This research has studied the cutting forces function, as one of the crucial machinability functions. The research was done at longitudinal turning of steel 16MnCr5. Coated carbide inserts for roughing and finishing with different inclination angles were used, and tool clamping system has enabled the changes of entry angle. Obtained results confirm that entry angle and geometry of cutting insert significantly influence cutting forces especially thrust cutting force.

turning; cutting forces; cutting tool inserts; inserts geometry;