PRIMOŽIČ, Janez ;SVEČKO, Rajko . Control in Refrigeration Systems. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 50, n.3, p. 168-180, july 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/control-in-refrigeration-systems/>. Date accessed: 31 dec. 2024. doi:http://dx.doi.org/.
Primožič, J., & Svečko, R. (2004). Control in Refrigeration Systems. Strojniški vestnik - Journal of Mechanical Engineering, 50(3), 168-180. doi:http://dx.doi.org/
@article{.,
author = {Janez Primožič and Rajko Svečko},
title = {Control in Refrigeration Systems},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {50},
number = {3},
year = {2004},
keywords = {refrigeration systems; control system; control equipment; SCADA systems; },
abstract = {This paper describes the control of refrigeration systems. The goal of the research is to support the design of refrigeration systems and to define the optimum parameters that influence refrigerating systems. A second aim of the investigation was an analysis of currently available control equipment for refrigeration systems and the producers. The equipment can be divided into two segments: equipment for the control of simple refrigeration systems, which consists of electronic thermostats for controlling the elements of the refrigeration rooms; and miniature microprocessor-based equipment used for controlling the smallest compressor aggregates. The advantages of this equipment are its his wide consumption, low cost and simple usage. Its drawbacks are inappropriateness for complex refrigeration systems in the sense of increasing the coefficient of performance (COP) and the consumption of electrical energy. The main emphasis of the paper is on the control of complex refrigeration systems based on programmable microprocessors and SCADA (supervisory control and data acquisition) systems.},
issn = {0039-2480}, pages = {168-180}, doi = {},
url = {https://www.sv-jme.eu/sl/article/control-in-refrigeration-systems/}
}
Primožič, J.,Svečko, R. 2004 July 50. Control in Refrigeration Systems. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 50:3
%A Primožič, Janez %A Svečko, Rajko %D 2004 %T Control in Refrigeration Systems %B 2004 %9 refrigeration systems; control system; control equipment; SCADA systems; %! Control in Refrigeration Systems %K refrigeration systems; control system; control equipment; SCADA systems; %X This paper describes the control of refrigeration systems. The goal of the research is to support the design of refrigeration systems and to define the optimum parameters that influence refrigerating systems. A second aim of the investigation was an analysis of currently available control equipment for refrigeration systems and the producers. The equipment can be divided into two segments: equipment for the control of simple refrigeration systems, which consists of electronic thermostats for controlling the elements of the refrigeration rooms; and miniature microprocessor-based equipment used for controlling the smallest compressor aggregates. The advantages of this equipment are its his wide consumption, low cost and simple usage. Its drawbacks are inappropriateness for complex refrigeration systems in the sense of increasing the coefficient of performance (COP) and the consumption of electrical energy. The main emphasis of the paper is on the control of complex refrigeration systems based on programmable microprocessors and SCADA (supervisory control and data acquisition) systems. %U https://www.sv-jme.eu/sl/article/control-in-refrigeration-systems/ %0 Journal Article %R %& 168 %P 13 %J Strojniški vestnik - Journal of Mechanical Engineering %V 50 %N 3 %@ 0039-2480 %8 2017-07-07 %7 2017-07-07
Primožič, Janez, & Rajko Svečko. "Control in Refrigeration Systems." Strojniški vestnik - Journal of Mechanical Engineering [Online], 50.3 (2004): 168-180. Web. 31 Dec. 2024
TY - JOUR AU - Primožič, Janez AU - Svečko, Rajko PY - 2004 TI - Control in Refrigeration Systems JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - refrigeration systems; control system; control equipment; SCADA systems; N2 - This paper describes the control of refrigeration systems. The goal of the research is to support the design of refrigeration systems and to define the optimum parameters that influence refrigerating systems. A second aim of the investigation was an analysis of currently available control equipment for refrigeration systems and the producers. The equipment can be divided into two segments: equipment for the control of simple refrigeration systems, which consists of electronic thermostats for controlling the elements of the refrigeration rooms; and miniature microprocessor-based equipment used for controlling the smallest compressor aggregates. The advantages of this equipment are its his wide consumption, low cost and simple usage. Its drawbacks are inappropriateness for complex refrigeration systems in the sense of increasing the coefficient of performance (COP) and the consumption of electrical energy. The main emphasis of the paper is on the control of complex refrigeration systems based on programmable microprocessors and SCADA (supervisory control and data acquisition) systems. UR - https://www.sv-jme.eu/sl/article/control-in-refrigeration-systems/
@article{{}{.},
author = {Primožič, J., Svečko, R.},
title = {Control in Refrigeration Systems},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {50},
number = {3},
year = {2004},
doi = {},
url = {https://www.sv-jme.eu/sl/article/control-in-refrigeration-systems/}
}
TY - JOUR AU - Primožič, Janez AU - Svečko, Rajko PY - 2017/07/07 TI - Control in Refrigeration Systems JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 50, No 3 (2004): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - refrigeration systems, control system, control equipment, SCADA systems, N2 - This paper describes the control of refrigeration systems. The goal of the research is to support the design of refrigeration systems and to define the optimum parameters that influence refrigerating systems. A second aim of the investigation was an analysis of currently available control equipment for refrigeration systems and the producers. The equipment can be divided into two segments: equipment for the control of simple refrigeration systems, which consists of electronic thermostats for controlling the elements of the refrigeration rooms; and miniature microprocessor-based equipment used for controlling the smallest compressor aggregates. The advantages of this equipment are its his wide consumption, low cost and simple usage. Its drawbacks are inappropriateness for complex refrigeration systems in the sense of increasing the coefficient of performance (COP) and the consumption of electrical energy. The main emphasis of the paper is on the control of complex refrigeration systems based on programmable microprocessors and SCADA (supervisory control and data acquisition) systems. UR - https://www.sv-jme.eu/sl/article/control-in-refrigeration-systems/
Primožič, Janez, AND Svečko, Rajko. "Control in Refrigeration Systems" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 50 Number 3 (07 July 2017)
Strojniški vestnik - Journal of Mechanical Engineering 50(2004)3, 168-180
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
This paper describes the control of refrigeration systems. The goal of the research is to support the design of refrigeration systems and to define the optimum parameters that influence refrigerating systems. A second aim of the investigation was an analysis of currently available control equipment for refrigeration systems and the producers. The equipment can be divided into two segments: equipment for the control of simple refrigeration systems, which consists of electronic thermostats for controlling the elements of the refrigeration rooms; and miniature microprocessor-based equipment used for controlling the smallest compressor aggregates. The advantages of this equipment are its his wide consumption, low cost and simple usage. Its drawbacks are inappropriateness for complex refrigeration systems in the sense of increasing the coefficient of performance (COP) and the consumption of electrical energy. The main emphasis of the paper is on the control of complex refrigeration systems based on programmable microprocessors and SCADA (supervisory control and data acquisition) systems.