ZHANG, Yu ;YAN, Hongzhi ;ZENG, Tao . Computerised Design and Simulation of Meshing and Contact of Formate Hypoid Gears Generated with a Duplex Helical Method. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 61, n.9, p. 523-532, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/computerised-design-and-simulation-of-meshing-and-contact-of-formate-hypoid-gears-generated-with-a-duplex-helical-method/>. Date accessed: 20 dec. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2015.2627.
Zhang, Y., Yan, H., & Zeng, T. (2015). Computerised Design and Simulation of Meshing and Contact of Formate Hypoid Gears Generated with a Duplex Helical Method. Strojniški vestnik - Journal of Mechanical Engineering, 61(9), 523-532. doi:http://dx.doi.org/10.5545/sv-jme.2015.2627
@article{sv-jmesv-jme.2015.2627,
author = {Yu Zhang and Hongzhi Yan and Tao Zeng},
title = {Computerised Design and Simulation of Meshing and Contact of Formate Hypoid Gears Generated with a Duplex Helical Method},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {61},
number = {9},
year = {2015},
keywords = {duplex helical method, spiral bevel and hypoid gears, face milling, basic machine settings, curvature parameter},
abstract = {The duplex helical method has higher machining efficiency for face-milling spiral bevel and hypoid gears. An accurate and practical approach for calculating the basic machine-tool settings of spiral bevel and hypoid gears manufactured with the duplex helical method is proposed in the present work. The gear tooth surface vector functions and curvature parameters based on basic machine, and head-cutter settings are calculated. Two types of curvature parameters for pinion tooth surfaces are obtained by utilizing the conjugation of gear and pinion tooth surfaces, and the conjugation of pinion tooth surfaces and pinion head-cutter surfaces at the reference point. Next, the basic machine settings for generating pinions in accordance with the two types of curvature parameters for pinion tooth surfaces are determined. Finally, a numerical examples using the duplex helical method are performed and validated by comparing with experimental results. New hypoid gear software has been developed using the new approach.},
issn = {0039-2480}, pages = {523-532}, doi = {10.5545/sv-jme.2015.2627},
url = {https://www.sv-jme.eu/sl/article/computerised-design-and-simulation-of-meshing-and-contact-of-formate-hypoid-gears-generated-with-a-duplex-helical-method/}
}
Zhang, Y.,Yan, H.,Zeng, T. 2015 June 61. Computerised Design and Simulation of Meshing and Contact of Formate Hypoid Gears Generated with a Duplex Helical Method. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 61:9
%A Zhang, Yu %A Yan, Hongzhi %A Zeng, Tao %D 2015 %T Computerised Design and Simulation of Meshing and Contact of Formate Hypoid Gears Generated with a Duplex Helical Method %B 2015 %9 duplex helical method, spiral bevel and hypoid gears, face milling, basic machine settings, curvature parameter %! Computerised Design and Simulation of Meshing and Contact of Formate Hypoid Gears Generated with a Duplex Helical Method %K duplex helical method, spiral bevel and hypoid gears, face milling, basic machine settings, curvature parameter %X The duplex helical method has higher machining efficiency for face-milling spiral bevel and hypoid gears. An accurate and practical approach for calculating the basic machine-tool settings of spiral bevel and hypoid gears manufactured with the duplex helical method is proposed in the present work. The gear tooth surface vector functions and curvature parameters based on basic machine, and head-cutter settings are calculated. Two types of curvature parameters for pinion tooth surfaces are obtained by utilizing the conjugation of gear and pinion tooth surfaces, and the conjugation of pinion tooth surfaces and pinion head-cutter surfaces at the reference point. Next, the basic machine settings for generating pinions in accordance with the two types of curvature parameters for pinion tooth surfaces are determined. Finally, a numerical examples using the duplex helical method are performed and validated by comparing with experimental results. New hypoid gear software has been developed using the new approach. %U https://www.sv-jme.eu/sl/article/computerised-design-and-simulation-of-meshing-and-contact-of-formate-hypoid-gears-generated-with-a-duplex-helical-method/ %0 Journal Article %R 10.5545/sv-jme.2015.2627 %& 523 %P 10 %J Strojniški vestnik - Journal of Mechanical Engineering %V 61 %N 9 %@ 0039-2480 %8 2018-06-27 %7 2018-06-27
Zhang, Yu, Hongzhi Yan, & Tao Zeng. "Computerised Design and Simulation of Meshing and Contact of Formate Hypoid Gears Generated with a Duplex Helical Method." Strojniški vestnik - Journal of Mechanical Engineering [Online], 61.9 (2015): 523-532. Web. 20 Dec. 2024
TY - JOUR AU - Zhang, Yu AU - Yan, Hongzhi AU - Zeng, Tao PY - 2015 TI - Computerised Design and Simulation of Meshing and Contact of Formate Hypoid Gears Generated with a Duplex Helical Method JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2015.2627 KW - duplex helical method, spiral bevel and hypoid gears, face milling, basic machine settings, curvature parameter N2 - The duplex helical method has higher machining efficiency for face-milling spiral bevel and hypoid gears. An accurate and practical approach for calculating the basic machine-tool settings of spiral bevel and hypoid gears manufactured with the duplex helical method is proposed in the present work. The gear tooth surface vector functions and curvature parameters based on basic machine, and head-cutter settings are calculated. Two types of curvature parameters for pinion tooth surfaces are obtained by utilizing the conjugation of gear and pinion tooth surfaces, and the conjugation of pinion tooth surfaces and pinion head-cutter surfaces at the reference point. Next, the basic machine settings for generating pinions in accordance with the two types of curvature parameters for pinion tooth surfaces are determined. Finally, a numerical examples using the duplex helical method are performed and validated by comparing with experimental results. New hypoid gear software has been developed using the new approach. UR - https://www.sv-jme.eu/sl/article/computerised-design-and-simulation-of-meshing-and-contact-of-formate-hypoid-gears-generated-with-a-duplex-helical-method/
@article{{sv-jme}{sv-jme.2015.2627},
author = {Zhang, Y., Yan, H., Zeng, T.},
title = {Computerised Design and Simulation of Meshing and Contact of Formate Hypoid Gears Generated with a Duplex Helical Method},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {61},
number = {9},
year = {2015},
doi = {10.5545/sv-jme.2015.2627},
url = {https://www.sv-jme.eu/sl/article/computerised-design-and-simulation-of-meshing-and-contact-of-formate-hypoid-gears-generated-with-a-duplex-helical-method/}
}
TY - JOUR AU - Zhang, Yu AU - Yan, Hongzhi AU - Zeng, Tao PY - 2018/06/27 TI - Computerised Design and Simulation of Meshing and Contact of Formate Hypoid Gears Generated with a Duplex Helical Method JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 61, No 9 (2015): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2015.2627 KW - duplex helical method, spiral bevel and hypoid gears, face milling, basic machine settings, curvature parameter N2 - The duplex helical method has higher machining efficiency for face-milling spiral bevel and hypoid gears. An accurate and practical approach for calculating the basic machine-tool settings of spiral bevel and hypoid gears manufactured with the duplex helical method is proposed in the present work. The gear tooth surface vector functions and curvature parameters based on basic machine, and head-cutter settings are calculated. Two types of curvature parameters for pinion tooth surfaces are obtained by utilizing the conjugation of gear and pinion tooth surfaces, and the conjugation of pinion tooth surfaces and pinion head-cutter surfaces at the reference point. Next, the basic machine settings for generating pinions in accordance with the two types of curvature parameters for pinion tooth surfaces are determined. Finally, a numerical examples using the duplex helical method are performed and validated by comparing with experimental results. New hypoid gear software has been developed using the new approach. UR - https://www.sv-jme.eu/sl/article/computerised-design-and-simulation-of-meshing-and-contact-of-formate-hypoid-gears-generated-with-a-duplex-helical-method/
Zhang, Yu, Yan, Hongzhi, AND Zeng, Tao. "Computerised Design and Simulation of Meshing and Contact of Formate Hypoid Gears Generated with a Duplex Helical Method" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 61 Number 9 (27 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 61(2015)9, 523-532
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
The duplex helical method has higher machining efficiency for face-milling spiral bevel and hypoid gears. An accurate and practical approach for calculating the basic machine-tool settings of spiral bevel and hypoid gears manufactured with the duplex helical method is proposed in the present work. The gear tooth surface vector functions and curvature parameters based on basic machine, and head-cutter settings are calculated. Two types of curvature parameters for pinion tooth surfaces are obtained by utilizing the conjugation of gear and pinion tooth surfaces, and the conjugation of pinion tooth surfaces and pinion head-cutter surfaces at the reference point. Next, the basic machine settings for generating pinions in accordance with the two types of curvature parameters for pinion tooth surfaces are determined. Finally, a numerical examples using the duplex helical method are performed and validated by comparing with experimental results. New hypoid gear software has been developed using the new approach.