Characterization of the AZ31/AW-6060 Joint Fabricated using Compound Casting with a Zn Interlayer at Relatively Low Temperature Conditions

BUCKI, Tomasz ;KONIECZNY, Marek ;BOLIBRUCHOVA, Dana ;RZEPA, Sylwia .
Characterization of the AZ31/AW-6060 Joint Fabricated using Compound Casting with a Zn Interlayer at Relatively Low Temperature Conditions. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 67, n.7-8, p. 389-397, august 2021. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/characterisation-of-the-az31aw-6060-joint-fabricated-by-compound-casting-with-a-zn-interlayer-at-relatively-low-temperature-conditions/>. Date accessed: 20 dec. 2024. 
doi:http://dx.doi.org/10.5545/sv-jme.2021.7262.

Bucki, T., Konieczny, M., Bolibruchova, D., & Rzepa, S.
(2021).
Characterization of the AZ31/AW-6060 Joint Fabricated using Compound Casting with a Zn Interlayer at Relatively Low Temperature Conditions.
Strojniški vestnik - Journal of Mechanical Engineering, 67(7-8), 389-397.
doi:http://dx.doi.org/10.5545/sv-jme.2021.7262

@article{sv-jmesv-jme.2021.7262,
	author = {Tomasz  Bucki and Marek  Konieczny and Dana  Bolibruchova and Sylwia  Rzepa},
	title = {Characterization of the AZ31/AW-6060 Joint Fabricated using Compound Casting with a Zn Interlayer at Relatively Low Temperature Conditions},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {67},
	number = {7-8},
	year = {2021},
	keywords = {compound casting, magnesium alloy, aluminium alloy, zinc interlayer, microstructure, mechanical properties},
	abstract = {The work deals with the fabrication of a joint between AZ31 magnesium alloy and AW-6060 aluminium alloy with the use of a Zn interlayer. The Zn layer was produced on the surface of an AW-6060 alloy insert by diffusion bonding. The insert was then placed inside a steel mould and kept at room temperature. The joint was produced using compound casting by filling the mould with liquid AZ31 alloy, heated to 650 °C. The microstructure of the bonding zone formed between joined alloys was analysed using an optical microscope and a scanning electron microscope equipped with an energy dispersive X-ray spectroscope. The properties of the joint were examined using Vickers microhardness measurements and simple shear strength testing. As a result of the experiment, the 400 μm thick bonding zone with a complex microstructure was formed between the alloys. The microstructural analysis showed that the bonding zone reveals a high concentration of Zn and Mg. The layers of a eutectoid (a MgZn phase + a solid solution of Al and Zn in Mg), a Mg5Al2Zn2 phase and a Mg(Al,Zn)2 phase with fine particles of other phases were observed there. The bonding zone was characterized by relatively high microhardness, which was related to the brittleness of the constituents. The shear strength of the examined joint was 19.6 ± 2.5 MPa.},
	issn = {0039-2480},	pages = {389-397},	doi = {10.5545/sv-jme.2021.7262},
	url = {https://www.sv-jme.eu/sl/article/characterisation-of-the-az31aw-6060-joint-fabricated-by-compound-casting-with-a-zn-interlayer-at-relatively-low-temperature-conditions/}
}

Bucki, T.,Konieczny, M.,Bolibruchova, D.,Rzepa, S.
2021 August 67. Characterization of the AZ31/AW-6060 Joint Fabricated using Compound Casting with a Zn Interlayer at Relatively Low Temperature Conditions. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 67:7-8

%A Bucki, Tomasz 
%A Konieczny, Marek 
%A Bolibruchova, Dana 
%A Rzepa, Sylwia 
%D 2021
%T Characterization of the AZ31/AW-6060 Joint Fabricated using Compound Casting with a Zn Interlayer at Relatively Low Temperature Conditions
%B 2021
%9 compound casting, magnesium alloy, aluminium alloy, zinc interlayer, microstructure, mechanical properties
%! Characterization of the AZ31/AW-6060 Joint Fabricated using Compound Casting with a Zn Interlayer at Relatively Low Temperature Conditions
%K compound casting, magnesium alloy, aluminium alloy, zinc interlayer, microstructure, mechanical properties
%X The work deals with the fabrication of a joint between AZ31 magnesium alloy and AW-6060 aluminium alloy with the use of a Zn interlayer. The Zn layer was produced on the surface of an AW-6060 alloy insert by diffusion bonding. The insert was then placed inside a steel mould and kept at room temperature. The joint was produced using compound casting by filling the mould with liquid AZ31 alloy, heated to 650 °C. The microstructure of the bonding zone formed between joined alloys was analysed using an optical microscope and a scanning electron microscope equipped with an energy dispersive X-ray spectroscope. The properties of the joint were examined using Vickers microhardness measurements and simple shear strength testing. As a result of the experiment, the 400 μm thick bonding zone with a complex microstructure was formed between the alloys. The microstructural analysis showed that the bonding zone reveals a high concentration of Zn and Mg. The layers of a eutectoid (a MgZn phase + a solid solution of Al and Zn in Mg), a Mg5Al2Zn2 phase and a Mg(Al,Zn)2 phase with fine particles of other phases were observed there. The bonding zone was characterized by relatively high microhardness, which was related to the brittleness of the constituents. The shear strength of the examined joint was 19.6 ± 2.5 MPa.
%U https://www.sv-jme.eu/sl/article/characterisation-of-the-az31aw-6060-joint-fabricated-by-compound-casting-with-a-zn-interlayer-at-relatively-low-temperature-conditions/
%0 Journal Article
%R 10.5545/sv-jme.2021.7262
%& 389
%P 9
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 67
%N 7-8
%@ 0039-2480
%8 2021-08-26
%7 2021-08-26

Bucki, Tomasz, Marek  Konieczny, Dana  Bolibruchova, & Sylwia  Rzepa.
"Characterization of the AZ31/AW-6060 Joint Fabricated using Compound Casting with a Zn Interlayer at Relatively Low Temperature Conditions." Strojniški vestnik - Journal of Mechanical Engineering [Online], 67.7-8 (2021): 389-397. Web.  20 Dec. 2024

TY  - JOUR
AU  - Bucki, Tomasz 
AU  - Konieczny, Marek 
AU  - Bolibruchova, Dana 
AU  - Rzepa, Sylwia 
PY  - 2021
TI  - Characterization of the AZ31/AW-6060 Joint Fabricated using Compound Casting with a Zn Interlayer at Relatively Low Temperature Conditions
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2021.7262
KW  - compound casting, magnesium alloy, aluminium alloy, zinc interlayer, microstructure, mechanical properties
N2  - The work deals with the fabrication of a joint between AZ31 magnesium alloy and AW-6060 aluminium alloy with the use of a Zn interlayer. The Zn layer was produced on the surface of an AW-6060 alloy insert by diffusion bonding. The insert was then placed inside a steel mould and kept at room temperature. The joint was produced using compound casting by filling the mould with liquid AZ31 alloy, heated to 650 °C. The microstructure of the bonding zone formed between joined alloys was analysed using an optical microscope and a scanning electron microscope equipped with an energy dispersive X-ray spectroscope. The properties of the joint were examined using Vickers microhardness measurements and simple shear strength testing. As a result of the experiment, the 400 μm thick bonding zone with a complex microstructure was formed between the alloys. The microstructural analysis showed that the bonding zone reveals a high concentration of Zn and Mg. The layers of a eutectoid (a MgZn phase + a solid solution of Al and Zn in Mg), a Mg5Al2Zn2 phase and a Mg(Al,Zn)2 phase with fine particles of other phases were observed there. The bonding zone was characterized by relatively high microhardness, which was related to the brittleness of the constituents. The shear strength of the examined joint was 19.6 ± 2.5 MPa.
UR  - https://www.sv-jme.eu/sl/article/characterisation-of-the-az31aw-6060-joint-fabricated-by-compound-casting-with-a-zn-interlayer-at-relatively-low-temperature-conditions/

@article{{sv-jme}{sv-jme.2021.7262},
	author = {Bucki, T., Konieczny, M., Bolibruchova, D., Rzepa, S.},
	title = {Characterization of the AZ31/AW-6060 Joint Fabricated using Compound Casting with a Zn Interlayer at Relatively Low Temperature Conditions},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {67},
	number = {7-8},
	year = {2021},
	doi = {10.5545/sv-jme.2021.7262},
	url = {https://www.sv-jme.eu/sl/article/characterisation-of-the-az31aw-6060-joint-fabricated-by-compound-casting-with-a-zn-interlayer-at-relatively-low-temperature-conditions/}
}

TY  - JOUR
AU  - Bucki, Tomasz 
AU  - Konieczny, Marek 
AU  - Bolibruchova, Dana 
AU  - Rzepa, Sylwia 
PY  - 2021/08/26
TI  - Characterization of the AZ31/AW-6060 Joint Fabricated using Compound Casting with a Zn Interlayer at Relatively Low Temperature Conditions
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 67, No 7-8 (2021): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2021.7262
KW  - compound casting, magnesium alloy, aluminium alloy, zinc interlayer, microstructure, mechanical properties
N2  - The work deals with the fabrication of a joint between AZ31 magnesium alloy and AW-6060 aluminium alloy with the use of a Zn interlayer. The Zn layer was produced on the surface of an AW-6060 alloy insert by diffusion bonding. The insert was then placed inside a steel mould and kept at room temperature. The joint was produced using compound casting by filling the mould with liquid AZ31 alloy, heated to 650 °C. The microstructure of the bonding zone formed between joined alloys was analysed using an optical microscope and a scanning electron microscope equipped with an energy dispersive X-ray spectroscope. The properties of the joint were examined using Vickers microhardness measurements and simple shear strength testing. As a result of the experiment, the 400 μm thick bonding zone with a complex microstructure was formed between the alloys. The microstructural analysis showed that the bonding zone reveals a high concentration of Zn and Mg. The layers of a eutectoid (a MgZn phase + a solid solution of Al and Zn in Mg), a Mg5Al2Zn2 phase and a Mg(Al,Zn)2 phase with fine particles of other phases were observed there. The bonding zone was characterized by relatively high microhardness, which was related to the brittleness of the constituents. The shear strength of the examined joint was 19.6 ± 2.5 MPa.
UR  - https://www.sv-jme.eu/sl/article/characterisation-of-the-az31aw-6060-joint-fabricated-by-compound-casting-with-a-zn-interlayer-at-relatively-low-temperature-conditions/

Bucki, Tomasz, Konieczny, Marek, Bolibruchova, Dana, AND Rzepa, Sylwia.
"Characterization of the AZ31/AW-6060 Joint Fabricated using Compound Casting with a Zn Interlayer at Relatively Low Temperature Conditions" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 67 Number 7-8 (26 August 2021)