KAMYCKI, Wiktor ;NOGA, Stanislaw . Application of the Thin Slice Model for Determination of Face Load Distribution along the Line of Contact and the Relative Load Distribution Measured along Gear Root. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 66, n.5, p. 300-310, may 2020. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/application-of-the-thin-slice-model-for-determination-of-face-load-distribution-along-the-line-of-contact-and-the-relative-load-distribution-measured-along-gear-root/>. Date accessed: 20 dec. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2020.6555.
Kamycki, W., & Noga, S. (2020). Application of the Thin Slice Model for Determination of Face Load Distribution along the Line of Contact and the Relative Load Distribution Measured along Gear Root. Strojniški vestnik - Journal of Mechanical Engineering, 66(5), 300-310. doi:http://dx.doi.org/10.5545/sv-jme.2020.6555
@article{sv-jmesv-jme.2020.6555,
author = {Wiktor Kamycki and Stanislaw Noga},
title = {Application of the Thin Slice Model for Determination of Face Load Distribution along the Line of Contact and the Relative Load Distribution Measured along Gear Root},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {66},
number = {5},
year = {2020},
keywords = {gear; load distribution; face load factor; stress distribution; strain gauging},
abstract = {This article concerns the investigation of the relationship between stress distribution caused by contact during tooth flank engagement and tensile stress distribution due to bending at the tooth root. Four different approaches are discussed. The first refers to ISO 6336 guidelines describing the relationship with a simple empirical formula. The second is the proposed thin slice model developed in MATLAB computer software. The third approach is based on finite element analysis (FEA). The last experimental method uses a bespoke test rig designed and manufactured for this work. The thin slice model has been verified against ISO 6336 guidelines, FEA simulation, and the test rig measurements. Two phenomena have been observed: coupling and edge effect, both of which impact the relationship between load intensity distribution for contact and bending.},
issn = {0039-2480}, pages = {300-310}, doi = {10.5545/sv-jme.2020.6555},
url = {https://www.sv-jme.eu/sl/article/application-of-the-thin-slice-model-for-determination-of-face-load-distribution-along-the-line-of-contact-and-the-relative-load-distribution-measured-along-gear-root/}
}
Kamycki, W.,Noga, S. 2020 May 66. Application of the Thin Slice Model for Determination of Face Load Distribution along the Line of Contact and the Relative Load Distribution Measured along Gear Root. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 66:5
%A Kamycki, Wiktor %A Noga, Stanislaw %D 2020 %T Application of the Thin Slice Model for Determination of Face Load Distribution along the Line of Contact and the Relative Load Distribution Measured along Gear Root %B 2020 %9 gear; load distribution; face load factor; stress distribution; strain gauging %! Application of the Thin Slice Model for Determination of Face Load Distribution along the Line of Contact and the Relative Load Distribution Measured along Gear Root %K gear; load distribution; face load factor; stress distribution; strain gauging %X This article concerns the investigation of the relationship between stress distribution caused by contact during tooth flank engagement and tensile stress distribution due to bending at the tooth root. Four different approaches are discussed. The first refers to ISO 6336 guidelines describing the relationship with a simple empirical formula. The second is the proposed thin slice model developed in MATLAB computer software. The third approach is based on finite element analysis (FEA). The last experimental method uses a bespoke test rig designed and manufactured for this work. The thin slice model has been verified against ISO 6336 guidelines, FEA simulation, and the test rig measurements. Two phenomena have been observed: coupling and edge effect, both of which impact the relationship between load intensity distribution for contact and bending. %U https://www.sv-jme.eu/sl/article/application-of-the-thin-slice-model-for-determination-of-face-load-distribution-along-the-line-of-contact-and-the-relative-load-distribution-measured-along-gear-root/ %0 Journal Article %R 10.5545/sv-jme.2020.6555 %& 300 %P 11 %J Strojniški vestnik - Journal of Mechanical Engineering %V 66 %N 5 %@ 0039-2480 %8 2020-05-26 %7 2020-05-26
Kamycki, Wiktor, & Stanislaw Noga. "Application of the Thin Slice Model for Determination of Face Load Distribution along the Line of Contact and the Relative Load Distribution Measured along Gear Root." Strojniški vestnik - Journal of Mechanical Engineering [Online], 66.5 (2020): 300-310. Web. 20 Dec. 2024
TY - JOUR AU - Kamycki, Wiktor AU - Noga, Stanislaw PY - 2020 TI - Application of the Thin Slice Model for Determination of Face Load Distribution along the Line of Contact and the Relative Load Distribution Measured along Gear Root JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2020.6555 KW - gear; load distribution; face load factor; stress distribution; strain gauging N2 - This article concerns the investigation of the relationship between stress distribution caused by contact during tooth flank engagement and tensile stress distribution due to bending at the tooth root. Four different approaches are discussed. The first refers to ISO 6336 guidelines describing the relationship with a simple empirical formula. The second is the proposed thin slice model developed in MATLAB computer software. The third approach is based on finite element analysis (FEA). The last experimental method uses a bespoke test rig designed and manufactured for this work. The thin slice model has been verified against ISO 6336 guidelines, FEA simulation, and the test rig measurements. Two phenomena have been observed: coupling and edge effect, both of which impact the relationship between load intensity distribution for contact and bending. UR - https://www.sv-jme.eu/sl/article/application-of-the-thin-slice-model-for-determination-of-face-load-distribution-along-the-line-of-contact-and-the-relative-load-distribution-measured-along-gear-root/
@article{{sv-jme}{sv-jme.2020.6555},
author = {Kamycki, W., Noga, S.},
title = {Application of the Thin Slice Model for Determination of Face Load Distribution along the Line of Contact and the Relative Load Distribution Measured along Gear Root},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {66},
number = {5},
year = {2020},
doi = {10.5545/sv-jme.2020.6555},
url = {https://www.sv-jme.eu/sl/article/application-of-the-thin-slice-model-for-determination-of-face-load-distribution-along-the-line-of-contact-and-the-relative-load-distribution-measured-along-gear-root/}
}
TY - JOUR AU - Kamycki, Wiktor AU - Noga, Stanislaw PY - 2020/05/26 TI - Application of the Thin Slice Model for Determination of Face Load Distribution along the Line of Contact and the Relative Load Distribution Measured along Gear Root JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 66, No 5 (2020): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2020.6555 KW - gear, load distribution, face load factor, stress distribution, strain gauging N2 - This article concerns the investigation of the relationship between stress distribution caused by contact during tooth flank engagement and tensile stress distribution due to bending at the tooth root. Four different approaches are discussed. The first refers to ISO 6336 guidelines describing the relationship with a simple empirical formula. The second is the proposed thin slice model developed in MATLAB computer software. The third approach is based on finite element analysis (FEA). The last experimental method uses a bespoke test rig designed and manufactured for this work. The thin slice model has been verified against ISO 6336 guidelines, FEA simulation, and the test rig measurements. Two phenomena have been observed: coupling and edge effect, both of which impact the relationship between load intensity distribution for contact and bending. UR - https://www.sv-jme.eu/sl/article/application-of-the-thin-slice-model-for-determination-of-face-load-distribution-along-the-line-of-contact-and-the-relative-load-distribution-measured-along-gear-root/
Kamycki, Wiktor, AND Noga, Stanislaw. "Application of the Thin Slice Model for Determination of Face Load Distribution along the Line of Contact and the Relative Load Distribution Measured along Gear Root" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 66 Number 5 (26 May 2020)
Strojniški vestnik - Journal of Mechanical Engineering 66(2020)5, 300-310
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
This article concerns the investigation of the relationship between stress distribution caused by contact during tooth flank engagement and tensile stress distribution due to bending at the tooth root. Four different approaches are discussed. The first refers to ISO 6336 guidelines describing the relationship with a simple empirical formula. The second is the proposed thin slice model developed in MATLAB computer software. The third approach is based on finite element analysis (FEA). The last experimental method uses a bespoke test rig designed and manufactured for this work. The thin slice model has been verified against ISO 6336 guidelines, FEA simulation, and the test rig measurements. Two phenomena have been observed: coupling and edge effect, both of which impact the relationship between load intensity distribution for contact and bending.