ÇIÇEK, Adem ;KIVAK, Turgay ;SAMTAŞ, Gürcan . Application of Taguchi Method for Surface Roughness and Roundness Error in Drilling of AISI 316 Stainless Steel. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 58, n.3, p. 165-174, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/application-of-taguchi-method-for-surface-roughness-and-roundness-error-in-drilling-of-aisi-316-stainless-steel/>. Date accessed: 19 nov. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2011.167.
Çiçek, A., Kıvak, T., & Samtaş, G. (2012). Application of Taguchi Method for Surface Roughness and Roundness Error in Drilling of AISI 316 Stainless Steel. Strojniški vestnik - Journal of Mechanical Engineering, 58(3), 165-174. doi:http://dx.doi.org/10.5545/sv-jme.2011.167
@article{sv-jmesv-jme.2011.167, author = {Adem Çiçek and Turgay Kıvak and Gürcan Samtaş}, title = {Application of Taguchi Method for Surface Roughness and Roundness Error in Drilling of AISI 316 Stainless Steel}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {58}, number = {3}, year = {2012}, keywords = {cryogenic treatment; drilling; surface roughness; roundness error; Taguchi method}, abstract = {In this study, the effects of deep cryogenic treatment and drilling parameters on surface roughness and roundness error were investigated in drilling of AISI 316 austenitic stainless steel with M35 HSS twist drills. In addition, optimal control factors for the hole quality were determined by using Taguchi technique. Two cutting tools, cutting speeds and feed rates were considered as control factors, and L8(23) orthogonal array was determined for experimental trials. Multiple regression analysis was employed to derive the predictive equations of the surface roughness and roundness error achieved via experimental design. Minimum surface roughness and roundness error were obtained with treated drills at 14 m/min cutting speed and 0.08 mm/rev feed rate. Confirmation experiments showed that Taguchi method precisely optimized the drilling parameters in drilling of stainless steel.}, issn = {0039-2480}, pages = {165-174}, doi = {10.5545/sv-jme.2011.167}, url = {https://www.sv-jme.eu/sl/article/application-of-taguchi-method-for-surface-roughness-and-roundness-error-in-drilling-of-aisi-316-stainless-steel/} }
Çiçek, A.,Kıvak, T.,Samtaş, G. 2012 June 58. Application of Taguchi Method for Surface Roughness and Roundness Error in Drilling of AISI 316 Stainless Steel. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 58:3
%A Çiçek, Adem %A Kıvak, Turgay %A Samtaş, Gürcan %D 2012 %T Application of Taguchi Method for Surface Roughness and Roundness Error in Drilling of AISI 316 Stainless Steel %B 2012 %9 cryogenic treatment; drilling; surface roughness; roundness error; Taguchi method %! Application of Taguchi Method for Surface Roughness and Roundness Error in Drilling of AISI 316 Stainless Steel %K cryogenic treatment; drilling; surface roughness; roundness error; Taguchi method %X In this study, the effects of deep cryogenic treatment and drilling parameters on surface roughness and roundness error were investigated in drilling of AISI 316 austenitic stainless steel with M35 HSS twist drills. In addition, optimal control factors for the hole quality were determined by using Taguchi technique. Two cutting tools, cutting speeds and feed rates were considered as control factors, and L8(23) orthogonal array was determined for experimental trials. Multiple regression analysis was employed to derive the predictive equations of the surface roughness and roundness error achieved via experimental design. Minimum surface roughness and roundness error were obtained with treated drills at 14 m/min cutting speed and 0.08 mm/rev feed rate. Confirmation experiments showed that Taguchi method precisely optimized the drilling parameters in drilling of stainless steel. %U https://www.sv-jme.eu/sl/article/application-of-taguchi-method-for-surface-roughness-and-roundness-error-in-drilling-of-aisi-316-stainless-steel/ %0 Journal Article %R 10.5545/sv-jme.2011.167 %& 165 %P 10 %J Strojniški vestnik - Journal of Mechanical Engineering %V 58 %N 3 %@ 0039-2480 %8 2018-06-28 %7 2018-06-28
Çiçek, Adem, Turgay Kıvak, & Gürcan Samtaş. "Application of Taguchi Method for Surface Roughness and Roundness Error in Drilling of AISI 316 Stainless Steel." Strojniški vestnik - Journal of Mechanical Engineering [Online], 58.3 (2012): 165-174. Web. 19 Nov. 2024
TY - JOUR AU - Çiçek, Adem AU - Kıvak, Turgay AU - Samtaş, Gürcan PY - 2012 TI - Application of Taguchi Method for Surface Roughness and Roundness Error in Drilling of AISI 316 Stainless Steel JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2011.167 KW - cryogenic treatment; drilling; surface roughness; roundness error; Taguchi method N2 - In this study, the effects of deep cryogenic treatment and drilling parameters on surface roughness and roundness error were investigated in drilling of AISI 316 austenitic stainless steel with M35 HSS twist drills. In addition, optimal control factors for the hole quality were determined by using Taguchi technique. Two cutting tools, cutting speeds and feed rates were considered as control factors, and L8(23) orthogonal array was determined for experimental trials. Multiple regression analysis was employed to derive the predictive equations of the surface roughness and roundness error achieved via experimental design. Minimum surface roughness and roundness error were obtained with treated drills at 14 m/min cutting speed and 0.08 mm/rev feed rate. Confirmation experiments showed that Taguchi method precisely optimized the drilling parameters in drilling of stainless steel. UR - https://www.sv-jme.eu/sl/article/application-of-taguchi-method-for-surface-roughness-and-roundness-error-in-drilling-of-aisi-316-stainless-steel/
@article{{sv-jme}{sv-jme.2011.167}, author = {Çiçek, A., Kıvak, T., Samtaş, G.}, title = {Application of Taguchi Method for Surface Roughness and Roundness Error in Drilling of AISI 316 Stainless Steel}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {58}, number = {3}, year = {2012}, doi = {10.5545/sv-jme.2011.167}, url = {https://www.sv-jme.eu/sl/article/application-of-taguchi-method-for-surface-roughness-and-roundness-error-in-drilling-of-aisi-316-stainless-steel/} }
TY - JOUR AU - Çiçek, Adem AU - Kıvak, Turgay AU - Samtaş, Gürcan PY - 2018/06/28 TI - Application of Taguchi Method for Surface Roughness and Roundness Error in Drilling of AISI 316 Stainless Steel JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 58, No 3 (2012): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2011.167 KW - cryogenic treatment, drilling, surface roughness, roundness error, Taguchi method N2 - In this study, the effects of deep cryogenic treatment and drilling parameters on surface roughness and roundness error were investigated in drilling of AISI 316 austenitic stainless steel with M35 HSS twist drills. In addition, optimal control factors for the hole quality were determined by using Taguchi technique. Two cutting tools, cutting speeds and feed rates were considered as control factors, and L8(23) orthogonal array was determined for experimental trials. Multiple regression analysis was employed to derive the predictive equations of the surface roughness and roundness error achieved via experimental design. Minimum surface roughness and roundness error were obtained with treated drills at 14 m/min cutting speed and 0.08 mm/rev feed rate. Confirmation experiments showed that Taguchi method precisely optimized the drilling parameters in drilling of stainless steel. UR - https://www.sv-jme.eu/sl/article/application-of-taguchi-method-for-surface-roughness-and-roundness-error-in-drilling-of-aisi-316-stainless-steel/
Çiçek, Adem, Kıvak, Turgay, AND Samtaş, Gürcan. "Application of Taguchi Method for Surface Roughness and Roundness Error in Drilling of AISI 316 Stainless Steel" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 58 Number 3 (28 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 58(2012)3, 165-174
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
In this study, the effects of deep cryogenic treatment and drilling parameters on surface roughness and roundness error were investigated in drilling of AISI 316 austenitic stainless steel with M35 HSS twist drills. In addition, optimal control factors for the hole quality were determined by using Taguchi technique. Two cutting tools, cutting speeds and feed rates were considered as control factors, and L8(23) orthogonal array was determined for experimental trials. Multiple regression analysis was employed to derive the predictive equations of the surface roughness and roundness error achieved via experimental design. Minimum surface roughness and roundness error were obtained with treated drills at 14 m/min cutting speed and 0.08 mm/rev feed rate. Confirmation experiments showed that Taguchi method precisely optimized the drilling parameters in drilling of stainless steel.