VOGELER, Frederik ;VERHEECKE, Wesley ;VOET, André ;VALKENAERS, Hans . An Initial Study of Aerosol Jet® Printed Interconnections on Extrusion-Based 3D-Printed Substrates. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 59, n.11, p. 689-696, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/an-initial-study-of-aerosol-jet-printed-interconnections-on-extrusion-based-3d-printed-substrates/>. Date accessed: 19 nov. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2013.999.
Vogeler, F., Verheecke, W., Voet, A., & Valkenaers, H. (2013). An Initial Study of Aerosol Jet® Printed Interconnections on Extrusion-Based 3D-Printed Substrates. Strojniški vestnik - Journal of Mechanical Engineering, 59(11), 689-696. doi:http://dx.doi.org/10.5545/sv-jme.2013.999
@article{sv-jmesv-jme.2013.999,
author = {Frederik Vogeler and Wesley Verheecke and André Voet and Hans Valkenaers},
title = {An Initial Study of Aerosol Jet® Printed Interconnections on Extrusion-Based 3D-Printed Substrates},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {59},
number = {11},
year = {2013},
keywords = {Aerosol Jet® Printing; Extrusion based 3D printing; Silver ink; Interconnects; Printed tracks; Conductive tracks},
abstract = {The combination of different additive manufacturing techniques to produce freeform products with multifunctional properties is gaining increasing popularity. In the research presented, Aerosol Jet® Printing (AJP) is combined with extrusion-based 3D printing. AJP starts with an ink to create micro-tracks. These tracks commonly have widths ranging from a few micrometers up to several millimeters and track heights ranging from a few tenths of a micrometer up to several micrometers, unlike extrusion-based 3D printers with which the extruded material usually has a resolution of tenths of millimeters. AJP can therefore be a complementary technique for extrusion-based 3D printing; in this manner, fine high resolution features can be added onto relatively rapidly produced extrusion-based 3D printed parts. Furthermore, AJP can be used to produce electrically conductive tracks to create interconnections, inductors, capacitors, strain gauges, etc. In this paper, the creation of AJP-manufactured interconnects on extrusion-based 3D printed substrates is investigated. The relevant AJP process parameters to take into account are the flow rates of the aerosol, the flow rate of the sheath gas, the temperature settings of the ink and substrate, and the platform speed and nozzle-to-substrate distance. To obtain reliable results, the AJP process parameters are optimized for printing single-layered and multilayered silver ink tracks on extrusion-based 3D-printed surfaces. Important quality output parameters include the dimensions and the electrical properties of the printed interconnects.},
issn = {0039-2480}, pages = {689-696}, doi = {10.5545/sv-jme.2013.999},
url = {https://www.sv-jme.eu/sl/article/an-initial-study-of-aerosol-jet-printed-interconnections-on-extrusion-based-3d-printed-substrates/}
}
Vogeler, F.,Verheecke, W.,Voet, A.,Valkenaers, H. 2013 June 59. An Initial Study of Aerosol Jet® Printed Interconnections on Extrusion-Based 3D-Printed Substrates. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 59:11
%A Vogeler, Frederik %A Verheecke, Wesley %A Voet, André %A Valkenaers, Hans %D 2013 %T An Initial Study of Aerosol Jet® Printed Interconnections on Extrusion-Based 3D-Printed Substrates %B 2013 %9 Aerosol Jet® Printing; Extrusion based 3D printing; Silver ink; Interconnects; Printed tracks; Conductive tracks %! An Initial Study of Aerosol Jet® Printed Interconnections on Extrusion-Based 3D-Printed Substrates %K Aerosol Jet® Printing; Extrusion based 3D printing; Silver ink; Interconnects; Printed tracks; Conductive tracks %X The combination of different additive manufacturing techniques to produce freeform products with multifunctional properties is gaining increasing popularity. In the research presented, Aerosol Jet® Printing (AJP) is combined with extrusion-based 3D printing. AJP starts with an ink to create micro-tracks. These tracks commonly have widths ranging from a few micrometers up to several millimeters and track heights ranging from a few tenths of a micrometer up to several micrometers, unlike extrusion-based 3D printers with which the extruded material usually has a resolution of tenths of millimeters. AJP can therefore be a complementary technique for extrusion-based 3D printing; in this manner, fine high resolution features can be added onto relatively rapidly produced extrusion-based 3D printed parts. Furthermore, AJP can be used to produce electrically conductive tracks to create interconnections, inductors, capacitors, strain gauges, etc. In this paper, the creation of AJP-manufactured interconnects on extrusion-based 3D printed substrates is investigated. The relevant AJP process parameters to take into account are the flow rates of the aerosol, the flow rate of the sheath gas, the temperature settings of the ink and substrate, and the platform speed and nozzle-to-substrate distance. To obtain reliable results, the AJP process parameters are optimized for printing single-layered and multilayered silver ink tracks on extrusion-based 3D-printed surfaces. Important quality output parameters include the dimensions and the electrical properties of the printed interconnects. %U https://www.sv-jme.eu/sl/article/an-initial-study-of-aerosol-jet-printed-interconnections-on-extrusion-based-3d-printed-substrates/ %0 Journal Article %R 10.5545/sv-jme.2013.999 %& 689 %P 8 %J Strojniški vestnik - Journal of Mechanical Engineering %V 59 %N 11 %@ 0039-2480 %8 2018-06-28 %7 2018-06-28
Vogeler, Frederik, Wesley Verheecke, André Voet, & Hans Valkenaers. "An Initial Study of Aerosol Jet® Printed Interconnections on Extrusion-Based 3D-Printed Substrates." Strojniški vestnik - Journal of Mechanical Engineering [Online], 59.11 (2013): 689-696. Web. 19 Nov. 2024
TY - JOUR AU - Vogeler, Frederik AU - Verheecke, Wesley AU - Voet, André AU - Valkenaers, Hans PY - 2013 TI - An Initial Study of Aerosol Jet® Printed Interconnections on Extrusion-Based 3D-Printed Substrates JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2013.999 KW - Aerosol Jet® Printing; Extrusion based 3D printing; Silver ink; Interconnects; Printed tracks; Conductive tracks N2 - The combination of different additive manufacturing techniques to produce freeform products with multifunctional properties is gaining increasing popularity. In the research presented, Aerosol Jet® Printing (AJP) is combined with extrusion-based 3D printing. AJP starts with an ink to create micro-tracks. These tracks commonly have widths ranging from a few micrometers up to several millimeters and track heights ranging from a few tenths of a micrometer up to several micrometers, unlike extrusion-based 3D printers with which the extruded material usually has a resolution of tenths of millimeters. AJP can therefore be a complementary technique for extrusion-based 3D printing; in this manner, fine high resolution features can be added onto relatively rapidly produced extrusion-based 3D printed parts. Furthermore, AJP can be used to produce electrically conductive tracks to create interconnections, inductors, capacitors, strain gauges, etc. In this paper, the creation of AJP-manufactured interconnects on extrusion-based 3D printed substrates is investigated. The relevant AJP process parameters to take into account are the flow rates of the aerosol, the flow rate of the sheath gas, the temperature settings of the ink and substrate, and the platform speed and nozzle-to-substrate distance. To obtain reliable results, the AJP process parameters are optimized for printing single-layered and multilayered silver ink tracks on extrusion-based 3D-printed surfaces. Important quality output parameters include the dimensions and the electrical properties of the printed interconnects. UR - https://www.sv-jme.eu/sl/article/an-initial-study-of-aerosol-jet-printed-interconnections-on-extrusion-based-3d-printed-substrates/
@article{{sv-jme}{sv-jme.2013.999},
author = {Vogeler, F., Verheecke, W., Voet, A., Valkenaers, H.},
title = {An Initial Study of Aerosol Jet® Printed Interconnections on Extrusion-Based 3D-Printed Substrates},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {59},
number = {11},
year = {2013},
doi = {10.5545/sv-jme.2013.999},
url = {https://www.sv-jme.eu/sl/article/an-initial-study-of-aerosol-jet-printed-interconnections-on-extrusion-based-3d-printed-substrates/}
}
TY - JOUR AU - Vogeler, Frederik AU - Verheecke, Wesley AU - Voet, André AU - Valkenaers, Hans PY - 2018/06/28 TI - An Initial Study of Aerosol Jet® Printed Interconnections on Extrusion-Based 3D-Printed Substrates JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 59, No 11 (2013): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2013.999 KW - Aerosol Jet® Printing, Extrusion based 3D printing, Silver ink, Interconnects, Printed tracks, Conductive tracks N2 - The combination of different additive manufacturing techniques to produce freeform products with multifunctional properties is gaining increasing popularity. In the research presented, Aerosol Jet® Printing (AJP) is combined with extrusion-based 3D printing. AJP starts with an ink to create micro-tracks. These tracks commonly have widths ranging from a few micrometers up to several millimeters and track heights ranging from a few tenths of a micrometer up to several micrometers, unlike extrusion-based 3D printers with which the extruded material usually has a resolution of tenths of millimeters. AJP can therefore be a complementary technique for extrusion-based 3D printing; in this manner, fine high resolution features can be added onto relatively rapidly produced extrusion-based 3D printed parts. Furthermore, AJP can be used to produce electrically conductive tracks to create interconnections, inductors, capacitors, strain gauges, etc. In this paper, the creation of AJP-manufactured interconnects on extrusion-based 3D printed substrates is investigated. The relevant AJP process parameters to take into account are the flow rates of the aerosol, the flow rate of the sheath gas, the temperature settings of the ink and substrate, and the platform speed and nozzle-to-substrate distance. To obtain reliable results, the AJP process parameters are optimized for printing single-layered and multilayered silver ink tracks on extrusion-based 3D-printed surfaces. Important quality output parameters include the dimensions and the electrical properties of the printed interconnects. UR - https://www.sv-jme.eu/sl/article/an-initial-study-of-aerosol-jet-printed-interconnections-on-extrusion-based-3d-printed-substrates/
Vogeler, Frederik, Verheecke, Wesley, Voet, André, AND Valkenaers, Hans. "An Initial Study of Aerosol Jet® Printed Interconnections on Extrusion-Based 3D-Printed Substrates" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 59 Number 11 (28 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 59(2013)11, 689-696
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
The combination of different additive manufacturing techniques to produce freeform products with multifunctional properties is gaining increasing popularity. In the research presented, Aerosol Jet® Printing (AJP) is combined with extrusion-based 3D printing. AJP starts with an ink to create micro-tracks. These tracks commonly have widths ranging from a few micrometers up to several millimeters and track heights ranging from a few tenths of a micrometer up to several micrometers, unlike extrusion-based 3D printers with which the extruded material usually has a resolution of tenths of millimeters. AJP can therefore be a complementary technique for extrusion-based 3D printing; in this manner, fine high resolution features can be added onto relatively rapidly produced extrusion-based 3D printed parts. Furthermore, AJP can be used to produce electrically conductive tracks to create interconnections, inductors, capacitors, strain gauges, etc. In this paper, the creation of AJP-manufactured interconnects on extrusion-based 3D printed substrates is investigated. The relevant AJP process parameters to take into account are the flow rates of the aerosol, the flow rate of the sheath gas, the temperature settings of the ink and substrate, and the platform speed and nozzle-to-substrate distance. To obtain reliable results, the AJP process parameters are optimized for printing single-layered and multilayered silver ink tracks on extrusion-based 3D-printed surfaces. Important quality output parameters include the dimensions and the electrical properties of the printed interconnects.