An Analysis of the Surface Geometric Structure and Geometric Accuracy of Cylindrical Gear Teeth Manufactured with the Direct Metal Laser Sintering (DMLS) Method

PISULA, Jadwiga Małgorzata;BUDZIK, Grzegorz ;PRZESZŁOWSKI, Łukasz .
An Analysis of the Surface Geometric Structure and Geometric Accuracy of Cylindrical Gear Teeth Manufactured with the Direct Metal Laser Sintering (DMLS) Method. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 65, n.2, p. 78-86, february 2019. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/an-analysis-of-surface-geometric-structure-and-geometric-accuracy-of-cylindrical-gear-teeth-manufactured-by-the-direct-metal-laser-sintering-dmls-method/>. Date accessed: 20 dec. 2024. 
doi:http://dx.doi.org/10.5545/sv-jme.2018.5614.

Pisula, J., Budzik, G., & Przeszłowski, �.
(2019).
An Analysis of the Surface Geometric Structure and Geometric Accuracy of Cylindrical Gear Teeth Manufactured with the Direct Metal Laser Sintering (DMLS) Method.
Strojniški vestnik - Journal of Mechanical Engineering, 65(2), 78-86.
doi:http://dx.doi.org/10.5545/sv-jme.2018.5614

@article{sv-jmesv-jme.2018.5614,
	author = {Jadwiga Małgorzata Pisula and Grzegorz  Budzik and Łukasz  Przeszłowski},
	title = {An Analysis of the Surface Geometric Structure and Geometric Accuracy of Cylindrical Gear Teeth Manufactured with the Direct Metal Laser Sintering (DMLS) Method},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {65},
	number = {2},
	year = {2019},
	keywords = {direct metal laser sintering (DMLS) method; surface geometric structure; cylindrical spur gears; geometric accuracy},
	abstract = {This paper presents findings concerning the accuracy of the geometry of cylindrical spur gear teeth manufactured with the direct metal laser sintering (DMLS) method. In addition, the results of the evaluation of the tooth surface geometric structure are presented in the form of selected two-dimensional and three-dimensional surface roughness parameters. An analysis of the accuracy of the fabricated gear teeth was performed after gear sand-blasting and gear tooth milling processes. Surface roughness was measured before and after sand-blasting and gear tooth milling. The test gear wheel was manufactured from GP1 high-chromium stainless steel on an EOS M270 machine.},
	issn = {0039-2480},	pages = {78-86},	doi = {10.5545/sv-jme.2018.5614},
	url = {https://www.sv-jme.eu/sl/article/an-analysis-of-surface-geometric-structure-and-geometric-accuracy-of-cylindrical-gear-teeth-manufactured-by-the-direct-metal-laser-sintering-dmls-method/}
}

Pisula, J.,Budzik, G.,Przeszłowski, �.
2019 February 65. An Analysis of the Surface Geometric Structure and Geometric Accuracy of Cylindrical Gear Teeth Manufactured with the Direct Metal Laser Sintering (DMLS) Method. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 65:2

%A Pisula, Jadwiga Małgorzata
%A Budzik, Grzegorz 
%A Przeszłowski, Łukasz 
%D 2019
%T An Analysis of the Surface Geometric Structure and Geometric Accuracy of Cylindrical Gear Teeth Manufactured with the Direct Metal Laser Sintering (DMLS) Method
%B 2019
%9 direct metal laser sintering (DMLS) method; surface geometric structure; cylindrical spur gears; geometric accuracy
%! An Analysis of the Surface Geometric Structure and Geometric Accuracy of Cylindrical Gear Teeth Manufactured with the Direct Metal Laser Sintering (DMLS) Method
%K direct metal laser sintering (DMLS) method; surface geometric structure; cylindrical spur gears; geometric accuracy
%X This paper presents findings concerning the accuracy of the geometry of cylindrical spur gear teeth manufactured with the direct metal laser sintering (DMLS) method. In addition, the results of the evaluation of the tooth surface geometric structure are presented in the form of selected two-dimensional and three-dimensional surface roughness parameters. An analysis of the accuracy of the fabricated gear teeth was performed after gear sand-blasting and gear tooth milling processes. Surface roughness was measured before and after sand-blasting and gear tooth milling. The test gear wheel was manufactured from GP1 high-chromium stainless steel on an EOS M270 machine.
%U https://www.sv-jme.eu/sl/article/an-analysis-of-surface-geometric-structure-and-geometric-accuracy-of-cylindrical-gear-teeth-manufactured-by-the-direct-metal-laser-sintering-dmls-method/
%0 Journal Article
%R 10.5545/sv-jme.2018.5614
%& 78
%P 9
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 65
%N 2
%@ 0039-2480
%8 2019-02-17
%7 2019-02-17

Pisula, Jadwiga, Grzegorz  Budzik, & Łukasz  Przeszłowski.
"An Analysis of the Surface Geometric Structure and Geometric Accuracy of Cylindrical Gear Teeth Manufactured with the Direct Metal Laser Sintering (DMLS) Method." Strojniški vestnik - Journal of Mechanical Engineering [Online], 65.2 (2019): 78-86. Web.  20 Dec. 2024

TY  - JOUR
AU  - Pisula, Jadwiga Małgorzata
AU  - Budzik, Grzegorz 
AU  - Przeszłowski, Łukasz 
PY  - 2019
TI  - An Analysis of the Surface Geometric Structure and Geometric Accuracy of Cylindrical Gear Teeth Manufactured with the Direct Metal Laser Sintering (DMLS) Method
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2018.5614
KW  - direct metal laser sintering (DMLS) method; surface geometric structure; cylindrical spur gears; geometric accuracy
N2  - This paper presents findings concerning the accuracy of the geometry of cylindrical spur gear teeth manufactured with the direct metal laser sintering (DMLS) method. In addition, the results of the evaluation of the tooth surface geometric structure are presented in the form of selected two-dimensional and three-dimensional surface roughness parameters. An analysis of the accuracy of the fabricated gear teeth was performed after gear sand-blasting and gear tooth milling processes. Surface roughness was measured before and after sand-blasting and gear tooth milling. The test gear wheel was manufactured from GP1 high-chromium stainless steel on an EOS M270 machine.
UR  - https://www.sv-jme.eu/sl/article/an-analysis-of-surface-geometric-structure-and-geometric-accuracy-of-cylindrical-gear-teeth-manufactured-by-the-direct-metal-laser-sintering-dmls-method/

@article{{sv-jme}{sv-jme.2018.5614},
	author = {Pisula, J., Budzik, G., Przeszłowski, �.},
	title = {An Analysis of the Surface Geometric Structure and Geometric Accuracy of Cylindrical Gear Teeth Manufactured with the Direct Metal Laser Sintering (DMLS) Method},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {65},
	number = {2},
	year = {2019},
	doi = {10.5545/sv-jme.2018.5614},
	url = {https://www.sv-jme.eu/sl/article/an-analysis-of-surface-geometric-structure-and-geometric-accuracy-of-cylindrical-gear-teeth-manufactured-by-the-direct-metal-laser-sintering-dmls-method/}
}

TY  - JOUR
AU  - Pisula, Jadwiga Małgorzata
AU  - Budzik, Grzegorz 
AU  - Przeszłowski, Łukasz 
PY  - 2019/02/17
TI  - An Analysis of the Surface Geometric Structure and Geometric Accuracy of Cylindrical Gear Teeth Manufactured with the Direct Metal Laser Sintering (DMLS) Method
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 65, No 2 (2019): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2018.5614
KW  - direct metal laser sintering (DMLS) method, surface geometric structure, cylindrical spur gears, geometric accuracy
N2  - This paper presents findings concerning the accuracy of the geometry of cylindrical spur gear teeth manufactured with the direct metal laser sintering (DMLS) method. In addition, the results of the evaluation of the tooth surface geometric structure are presented in the form of selected two-dimensional and three-dimensional surface roughness parameters. An analysis of the accuracy of the fabricated gear teeth was performed after gear sand-blasting and gear tooth milling processes. Surface roughness was measured before and after sand-blasting and gear tooth milling. The test gear wheel was manufactured from GP1 high-chromium stainless steel on an EOS M270 machine.
UR  - https://www.sv-jme.eu/sl/article/an-analysis-of-surface-geometric-structure-and-geometric-accuracy-of-cylindrical-gear-teeth-manufactured-by-the-direct-metal-laser-sintering-dmls-method/

Pisula, Jadwiga, Budzik, Grzegorz, AND Przeszłowski, Łukasz.
"An Analysis of the Surface Geometric Structure and Geometric Accuracy of Cylindrical Gear Teeth Manufactured with the Direct Metal Laser Sintering (DMLS) Method" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 65 Number 2 (17 February 2019)