Machining of Hard-to-cut AISI 4462 Duplex Stainless Steel with an Environmentally Friendly Approach with Vortex Tube

675 Ogledov
585 Prenosov
Izvoz citacije: ABNT
SÖNMEZ, Fikret .
Machining of Hard-to-cut AISI 4462 Duplex Stainless Steel with an Environmentally Friendly Approach with Vortex Tube. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 69, n.7-8, p. 308-316, may 2023. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/machining-of-hard-to-cut-aisi-4462-duplex-stainless-steel-with-an-environmentally-friendly-approach-with-vortex-tube/>. Date accessed: 20 dec. 2024. 
doi:http://dx.doi.org/10.5545/sv-jme.2023.578.
Sönmez, F.
(2023).
Machining of Hard-to-cut AISI 4462 Duplex Stainless Steel with an Environmentally Friendly Approach with Vortex Tube.
Strojniški vestnik - Journal of Mechanical Engineering, 69(7-8), 308-316.
doi:http://dx.doi.org/10.5545/sv-jme.2023.578
@article{sv-jmesv-jme.2023.578,
	author = {Fikret  Sönmez},
	title = {Machining of Hard-to-cut AISI 4462 Duplex Stainless Steel with an Environmentally Friendly Approach with Vortex Tube},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {69},
	number = {7-8},
	year = {2023},
	keywords = {Vortex tube; machining; duplex stainless steel; tool life; surface roughness; },
	abstract = {Machining is a manufacturing process that can be used to produce precision machine parts and has many advantages. The first is the ability to achieve superior surface quality. Tool wear is an inevitable phenomenon that occurs during machining. It is affected by many machining conditions; therefore, this process needs to be monitored and controlled. In this study, tool wear and surface roughness tests were carried out on AISI 4462 duplex stainless-steel materials, known to be a hard-to-cut material. For this purpose, tool wear and surface roughness analyses were implemented by using the environmentally friendly vortex tube cooling system in addition to wet turning conditions for the first time. For both methods, experiments were conducted at a 1 mm depth of cut, 120 m/min cutting speed, and 0.1 mm/rev feed with a 90 mm cutting length for each pass. Both tool wear and surface roughness were examined at the end of each pass. The analysis showed that wet turning gave better results in terms of tool life (19.8 minutes of tool life) compared to 11.1 minutes of tool life in vortex turning. In contrast, the surface roughness values differed up to two times in some experiments, and the vortex tube experiments gave better surface roughness values in all passes. In addition, the vortex tube experiments showed less built-up-edge (BUE) formation than the wet-turning experiments.},
	issn = {0039-2480},	pages = {308-316},	doi = {10.5545/sv-jme.2023.578},
	url = {https://www.sv-jme.eu/sl/article/machining-of-hard-to-cut-aisi-4462-duplex-stainless-steel-with-an-environmentally-friendly-approach-with-vortex-tube/}
}
Sönmez, F.
2023 May 69. Machining of Hard-to-cut AISI 4462 Duplex Stainless Steel with an Environmentally Friendly Approach with Vortex Tube. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 69:7-8
%A Sönmez, Fikret 
%D 2023
%T Machining of Hard-to-cut AISI 4462 Duplex Stainless Steel with an Environmentally Friendly Approach with Vortex Tube
%B 2023
%9 Vortex tube; machining; duplex stainless steel; tool life; surface roughness; 
%! Machining of Hard-to-cut AISI 4462 Duplex Stainless Steel with an Environmentally Friendly Approach with Vortex Tube
%K Vortex tube; machining; duplex stainless steel; tool life; surface roughness; 
%X Machining is a manufacturing process that can be used to produce precision machine parts and has many advantages. The first is the ability to achieve superior surface quality. Tool wear is an inevitable phenomenon that occurs during machining. It is affected by many machining conditions; therefore, this process needs to be monitored and controlled. In this study, tool wear and surface roughness tests were carried out on AISI 4462 duplex stainless-steel materials, known to be a hard-to-cut material. For this purpose, tool wear and surface roughness analyses were implemented by using the environmentally friendly vortex tube cooling system in addition to wet turning conditions for the first time. For both methods, experiments were conducted at a 1 mm depth of cut, 120 m/min cutting speed, and 0.1 mm/rev feed with a 90 mm cutting length for each pass. Both tool wear and surface roughness were examined at the end of each pass. The analysis showed that wet turning gave better results in terms of tool life (19.8 minutes of tool life) compared to 11.1 minutes of tool life in vortex turning. In contrast, the surface roughness values differed up to two times in some experiments, and the vortex tube experiments gave better surface roughness values in all passes. In addition, the vortex tube experiments showed less built-up-edge (BUE) formation than the wet-turning experiments.
%U https://www.sv-jme.eu/sl/article/machining-of-hard-to-cut-aisi-4462-duplex-stainless-steel-with-an-environmentally-friendly-approach-with-vortex-tube/
%0 Journal Article
%R 10.5545/sv-jme.2023.578
%& 308
%P 9
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 69
%N 7-8
%@ 0039-2480
%8 2023-05-03
%7 2023-05-03
Sönmez, Fikret.
"Machining of Hard-to-cut AISI 4462 Duplex Stainless Steel with an Environmentally Friendly Approach with Vortex Tube." Strojniški vestnik - Journal of Mechanical Engineering [Online], 69.7-8 (2023): 308-316. Web.  20 Dec. 2024
TY  - JOUR
AU  - Sönmez, Fikret 
PY  - 2023
TI  - Machining of Hard-to-cut AISI 4462 Duplex Stainless Steel with an Environmentally Friendly Approach with Vortex Tube
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2023.578
KW  - Vortex tube; machining; duplex stainless steel; tool life; surface roughness; 
N2  - Machining is a manufacturing process that can be used to produce precision machine parts and has many advantages. The first is the ability to achieve superior surface quality. Tool wear is an inevitable phenomenon that occurs during machining. It is affected by many machining conditions; therefore, this process needs to be monitored and controlled. In this study, tool wear and surface roughness tests were carried out on AISI 4462 duplex stainless-steel materials, known to be a hard-to-cut material. For this purpose, tool wear and surface roughness analyses were implemented by using the environmentally friendly vortex tube cooling system in addition to wet turning conditions for the first time. For both methods, experiments were conducted at a 1 mm depth of cut, 120 m/min cutting speed, and 0.1 mm/rev feed with a 90 mm cutting length for each pass. Both tool wear and surface roughness were examined at the end of each pass. The analysis showed that wet turning gave better results in terms of tool life (19.8 minutes of tool life) compared to 11.1 minutes of tool life in vortex turning. In contrast, the surface roughness values differed up to two times in some experiments, and the vortex tube experiments gave better surface roughness values in all passes. In addition, the vortex tube experiments showed less built-up-edge (BUE) formation than the wet-turning experiments.
UR  - https://www.sv-jme.eu/sl/article/machining-of-hard-to-cut-aisi-4462-duplex-stainless-steel-with-an-environmentally-friendly-approach-with-vortex-tube/
@article{{sv-jme}{sv-jme.2023.578},
	author = {Sönmez, F.},
	title = {Machining of Hard-to-cut AISI 4462 Duplex Stainless Steel with an Environmentally Friendly Approach with Vortex Tube},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {69},
	number = {7-8},
	year = {2023},
	doi = {10.5545/sv-jme.2023.578},
	url = {https://www.sv-jme.eu/sl/article/machining-of-hard-to-cut-aisi-4462-duplex-stainless-steel-with-an-environmentally-friendly-approach-with-vortex-tube/}
}
TY  - JOUR
AU  - Sönmez, Fikret 
PY  - 2023/05/03
TI  - Machining of Hard-to-cut AISI 4462 Duplex Stainless Steel with an Environmentally Friendly Approach with Vortex Tube
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 69, No 7-8 (2023): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2023.578
KW  - Vortex tube, machining, duplex stainless steel, tool life, surface roughness, 
N2  - Machining is a manufacturing process that can be used to produce precision machine parts and has many advantages. The first is the ability to achieve superior surface quality. Tool wear is an inevitable phenomenon that occurs during machining. It is affected by many machining conditions; therefore, this process needs to be monitored and controlled. In this study, tool wear and surface roughness tests were carried out on AISI 4462 duplex stainless-steel materials, known to be a hard-to-cut material. For this purpose, tool wear and surface roughness analyses were implemented by using the environmentally friendly vortex tube cooling system in addition to wet turning conditions for the first time. For both methods, experiments were conducted at a 1 mm depth of cut, 120 m/min cutting speed, and 0.1 mm/rev feed with a 90 mm cutting length for each pass. Both tool wear and surface roughness were examined at the end of each pass. The analysis showed that wet turning gave better results in terms of tool life (19.8 minutes of tool life) compared to 11.1 minutes of tool life in vortex turning. In contrast, the surface roughness values differed up to two times in some experiments, and the vortex tube experiments gave better surface roughness values in all passes. In addition, the vortex tube experiments showed less built-up-edge (BUE) formation than the wet-turning experiments.
UR  - https://www.sv-jme.eu/sl/article/machining-of-hard-to-cut-aisi-4462-duplex-stainless-steel-with-an-environmentally-friendly-approach-with-vortex-tube/
Sönmez, Fikret"Machining of Hard-to-cut AISI 4462 Duplex Stainless Steel with an Environmentally Friendly Approach with Vortex Tube" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 69 Number 7-8 (03 May 2023)

Avtorji

Inštitucije

  • Manisa Celal Bayar University, Hasan Ferdi Turgutlu Faculty of Technology, Turkey 1

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 69(2023)7-8, 308-316
© The Authors 2023. CC BY 4.0 Int.

https://doi.org/10.5545/sv-jme.2023.578

Machining is a manufacturing process that can be used to produce precision machine parts and has many advantages. The first is the ability to achieve superior surface quality. Tool wear is an inevitable phenomenon that occurs during machining. It is affected by many machining conditions; therefore, this process needs to be monitored and controlled. In this study, tool wear and surface roughness tests were carried out on AISI 4462 duplex stainless-steel materials, known to be a hard-to-cut material. For this purpose, tool wear and surface roughness analyses were implemented by using the environmentally friendly vortex tube cooling system in addition to wet turning conditions for the first time. For both methods, experiments were conducted at a 1 mm depth of cut, 120 m/min cutting speed, and 0.1 mm/rev feed with a 90 mm cutting length for each pass. Both tool wear and surface roughness were examined at the end of each pass. The analysis showed that wet turning gave better results in terms of tool life (19.8 minutes of tool life) compared to 11.1 minutes of tool life in vortex turning. In contrast, the surface roughness values differed up to two times in some experiments, and the vortex tube experiments gave better surface roughness values in all passes. In addition, the vortex tube experiments showed less built-up-edge (BUE) formation than the wet-turning experiments.

Vortex tube; machining; duplex stainless steel; tool life; surface roughness;