MADEN, Hakan ;ÇETINKAYA, Kerim . Production of the Design Developed to Assembly Filter Parts, Optimization of Welding and Field Test. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 68, n.11, p. 657-668, september 2022. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/production-of-the-design-developed-to-assembly-filter-parts-optimization-of-welding-and-field-test/>. Date accessed: 01 sep. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2022.255.
Maden, H., & Çetinkaya, K. (2022). Production of the Design Developed to Assembly Filter Parts, Optimization of Welding and Field Test. Strojniški vestnik - Journal of Mechanical Engineering, 68(11), 657-668. doi:http://dx.doi.org/10.5545/sv-jme.2022.255
@article{sv-jmesv-jme.2022.255, author = {Hakan Maden and Kerim Çetinkaya}, title = {Production of the Design Developed to Assembly Filter Parts, Optimization of Welding and Field Test}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {68}, number = {11}, year = {2022}, keywords = {rotary friction welding; Taguchi experimental method and ANOVA analysis; Semi-melt agglomerations; NSF water purification; field test; static and dynamic testing; }, abstract = {At the joining of non-removable plastic parts, the methods such as friction welding, friction-stir welding, ultra-sonic welding, chemical joining, hot-plate welding use. Rotary friction welding, which is one of the friction welding methods, is generally used for joining the filter parts of water treatment devices. After rotating friction welding of the filter parts, semi-melted agglomerations are formed in the inner parts. To prevent semi-melted accumulation, weld joint profile design was developed in the ABAQUS program in the previous study. In this study injection molds had been produced and production according to weld joint profile design. The taken plastic presses were welded with the friction welding machine and the joint was controled and compared. It is seen that the semi-melted agglomeration was successfully confined. By performing Taguchi experimental method and ANOVA analysis on friction welding machine parameters the optimum pressure conditions were determined, aimed to carry out static and dynamic tests according to NSF standards and field tests by producing 1500 pilots product and it has been put into use. The lifetime of the developed filter depends on the material which was used in manufacture. In the next study, it is aimed to improve the lifetime of the developed filters.}, issn = {0039-2480}, pages = {657-668}, doi = {10.5545/sv-jme.2022.255}, url = {https://www.sv-jme.eu/sl/article/production-of-the-design-developed-to-assembly-filter-parts-optimization-of-welding-and-field-test/} }
Maden, H.,Çetinkaya, K. 2022 September 68. Production of the Design Developed to Assembly Filter Parts, Optimization of Welding and Field Test. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 68:11
%A Maden, Hakan %A Çetinkaya, Kerim %D 2022 %T Production of the Design Developed to Assembly Filter Parts, Optimization of Welding and Field Test %B 2022 %9 rotary friction welding; Taguchi experimental method and ANOVA analysis; Semi-melt agglomerations; NSF water purification; field test; static and dynamic testing; %! Production of the Design Developed to Assembly Filter Parts, Optimization of Welding and Field Test %K rotary friction welding; Taguchi experimental method and ANOVA analysis; Semi-melt agglomerations; NSF water purification; field test; static and dynamic testing; %X At the joining of non-removable plastic parts, the methods such as friction welding, friction-stir welding, ultra-sonic welding, chemical joining, hot-plate welding use. Rotary friction welding, which is one of the friction welding methods, is generally used for joining the filter parts of water treatment devices. After rotating friction welding of the filter parts, semi-melted agglomerations are formed in the inner parts. To prevent semi-melted accumulation, weld joint profile design was developed in the ABAQUS program in the previous study. In this study injection molds had been produced and production according to weld joint profile design. The taken plastic presses were welded with the friction welding machine and the joint was controled and compared. It is seen that the semi-melted agglomeration was successfully confined. By performing Taguchi experimental method and ANOVA analysis on friction welding machine parameters the optimum pressure conditions were determined, aimed to carry out static and dynamic tests according to NSF standards and field tests by producing 1500 pilots product and it has been put into use. The lifetime of the developed filter depends on the material which was used in manufacture. In the next study, it is aimed to improve the lifetime of the developed filters. %U https://www.sv-jme.eu/sl/article/production-of-the-design-developed-to-assembly-filter-parts-optimization-of-welding-and-field-test/ %0 Journal Article %R 10.5545/sv-jme.2022.255 %& 657 %P 12 %J Strojniški vestnik - Journal of Mechanical Engineering %V 68 %N 11 %@ 0039-2480 %8 2022-09-13 %7 2022-09-13
Maden, Hakan, & Kerim Çetinkaya. "Production of the Design Developed to Assembly Filter Parts, Optimization of Welding and Field Test." Strojniški vestnik - Journal of Mechanical Engineering [Online], 68.11 (2022): 657-668. Web. 01 Sep. 2024
TY - JOUR AU - Maden, Hakan AU - Çetinkaya, Kerim PY - 2022 TI - Production of the Design Developed to Assembly Filter Parts, Optimization of Welding and Field Test JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2022.255 KW - rotary friction welding; Taguchi experimental method and ANOVA analysis; Semi-melt agglomerations; NSF water purification; field test; static and dynamic testing; N2 - At the joining of non-removable plastic parts, the methods such as friction welding, friction-stir welding, ultra-sonic welding, chemical joining, hot-plate welding use. Rotary friction welding, which is one of the friction welding methods, is generally used for joining the filter parts of water treatment devices. After rotating friction welding of the filter parts, semi-melted agglomerations are formed in the inner parts. To prevent semi-melted accumulation, weld joint profile design was developed in the ABAQUS program in the previous study. In this study injection molds had been produced and production according to weld joint profile design. The taken plastic presses were welded with the friction welding machine and the joint was controled and compared. It is seen that the semi-melted agglomeration was successfully confined. By performing Taguchi experimental method and ANOVA analysis on friction welding machine parameters the optimum pressure conditions were determined, aimed to carry out static and dynamic tests according to NSF standards and field tests by producing 1500 pilots product and it has been put into use. The lifetime of the developed filter depends on the material which was used in manufacture. In the next study, it is aimed to improve the lifetime of the developed filters. UR - https://www.sv-jme.eu/sl/article/production-of-the-design-developed-to-assembly-filter-parts-optimization-of-welding-and-field-test/
@article{{sv-jme}{sv-jme.2022.255}, author = {Maden, H., Çetinkaya, K.}, title = {Production of the Design Developed to Assembly Filter Parts, Optimization of Welding and Field Test}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {68}, number = {11}, year = {2022}, doi = {10.5545/sv-jme.2022.255}, url = {https://www.sv-jme.eu/sl/article/production-of-the-design-developed-to-assembly-filter-parts-optimization-of-welding-and-field-test/} }
TY - JOUR AU - Maden, Hakan AU - Çetinkaya, Kerim PY - 2022/09/13 TI - Production of the Design Developed to Assembly Filter Parts, Optimization of Welding and Field Test JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 68, No 11 (2022): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2022.255 KW - rotary friction welding, Taguchi experimental method and ANOVA analysis, Semi-melt agglomerations, NSF water purification, field test, static and dynamic testing, N2 - At the joining of non-removable plastic parts, the methods such as friction welding, friction-stir welding, ultra-sonic welding, chemical joining, hot-plate welding use. Rotary friction welding, which is one of the friction welding methods, is generally used for joining the filter parts of water treatment devices. After rotating friction welding of the filter parts, semi-melted agglomerations are formed in the inner parts. To prevent semi-melted accumulation, weld joint profile design was developed in the ABAQUS program in the previous study. In this study injection molds had been produced and production according to weld joint profile design. The taken plastic presses were welded with the friction welding machine and the joint was controled and compared. It is seen that the semi-melted agglomeration was successfully confined. By performing Taguchi experimental method and ANOVA analysis on friction welding machine parameters the optimum pressure conditions were determined, aimed to carry out static and dynamic tests according to NSF standards and field tests by producing 1500 pilots product and it has been put into use. The lifetime of the developed filter depends on the material which was used in manufacture. In the next study, it is aimed to improve the lifetime of the developed filters. UR - https://www.sv-jme.eu/sl/article/production-of-the-design-developed-to-assembly-filter-parts-optimization-of-welding-and-field-test/
Maden, Hakan, AND Çetinkaya, Kerim. "Production of the Design Developed to Assembly Filter Parts, Optimization of Welding and Field Test" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 68 Number 11 (13 September 2022)
Strojniški vestnik - Journal of Mechanical Engineering 68(2022)11, 657-668
© The Authors 2022. CC BY 4.0 Int.
At the joining of non-removable plastic parts, the methods such as friction welding, friction-stir welding, ultra-sonic welding, chemical joining, hot-plate welding use. Rotary friction welding, which is one of the friction welding methods, is generally used for joining the filter parts of water treatment devices. After rotating friction welding of the filter parts, semi-melted agglomerations are formed in the inner parts. To prevent semi-melted accumulation, weld joint profile design was developed in the ABAQUS program in the previous study. In this study injection molds had been produced and production according to weld joint profile design. The taken plastic presses were welded with the friction welding machine and the joint was controled and compared. It is seen that the semi-melted agglomeration was successfully confined. By performing Taguchi experimental method and ANOVA analysis on friction welding machine parameters the optimum pressure conditions were determined, aimed to carry out static and dynamic tests according to NSF standards and field tests by producing 1500 pilots product and it has been put into use. The lifetime of the developed filter depends on the material which was used in manufacture. In the next study, it is aimed to improve the lifetime of the developed filters.