SELVAKUMAR, Mohanraj ;VENUGOPAL, Prabhu Raja ;VELAYUDHAN, Gautham . Optimization of Tuned Mass Damper Location for Enhanced Chatter Suppression in Thin-wall Milling. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 68, n.5, p. 339-349, february 2022. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/optimization-of-tuned-mass-damper-location-for-enhanced-chatter-suppression-in-thin-wall-milling/>. Date accessed: 20 dec. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2022.4.
Selvakumar, M., Venugopal, P., & Velayudhan, G. (2022). Optimization of Tuned Mass Damper Location for Enhanced Chatter Suppression in Thin-wall Milling. Strojniški vestnik - Journal of Mechanical Engineering, 68(5), 339-349. doi:http://dx.doi.org/10.5545/sv-jme.2022.4
@article{sv-jmesv-jme.2022.4,
author = {Mohanraj Selvakumar and Prabhu Raja Venugopal and Gautham Velayudhan},
title = {Optimization of Tuned Mass Damper Location for Enhanced Chatter Suppression in Thin-wall Milling},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {68},
number = {5},
year = {2022},
keywords = {Chatter; thin-wall milling; tuned mass damper; response surface optimization; },
abstract = {In this paper, a method to optimize the location of tuned mass damper (TMD) for enhancing chatter stability limits of thin-walled workpiece by using numerical techniques is proposed with due consideration to mass effect of TMD. The dominant mode of workpiece is identified from the simulated and measured frequency response functions of the workpiece. Two TMDs each having single degree of freedom are designed and a finite element model to predict the response of the workpiece-damper system is developed. The effect of damper location on the chatter stability of the thin-walled workpiece is investigated. Further, the locations for TMDs are optimized for enhanced chatter stability of workpiece by using response surface methodology. Milling tests were performed on workpiece with and without TMDs. A three-fold improvement in minimum stable depth of cut is realized after incorporating the TMDs at their optimal locations on thin-walled workpiece.},
issn = {0039-2480}, pages = {339-349}, doi = {10.5545/sv-jme.2022.4},
url = {https://www.sv-jme.eu/sl/article/optimization-of-tuned-mass-damper-location-for-enhanced-chatter-suppression-in-thin-wall-milling/}
}
Selvakumar, M.,Venugopal, P.,Velayudhan, G. 2022 February 68. Optimization of Tuned Mass Damper Location for Enhanced Chatter Suppression in Thin-wall Milling. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 68:5
%A Selvakumar, Mohanraj %A Venugopal, Prabhu Raja %A Velayudhan, Gautham %D 2022 %T Optimization of Tuned Mass Damper Location for Enhanced Chatter Suppression in Thin-wall Milling %B 2022 %9 Chatter; thin-wall milling; tuned mass damper; response surface optimization; %! Optimization of Tuned Mass Damper Location for Enhanced Chatter Suppression in Thin-wall Milling %K Chatter; thin-wall milling; tuned mass damper; response surface optimization; %X In this paper, a method to optimize the location of tuned mass damper (TMD) for enhancing chatter stability limits of thin-walled workpiece by using numerical techniques is proposed with due consideration to mass effect of TMD. The dominant mode of workpiece is identified from the simulated and measured frequency response functions of the workpiece. Two TMDs each having single degree of freedom are designed and a finite element model to predict the response of the workpiece-damper system is developed. The effect of damper location on the chatter stability of the thin-walled workpiece is investigated. Further, the locations for TMDs are optimized for enhanced chatter stability of workpiece by using response surface methodology. Milling tests were performed on workpiece with and without TMDs. A three-fold improvement in minimum stable depth of cut is realized after incorporating the TMDs at their optimal locations on thin-walled workpiece. %U https://www.sv-jme.eu/sl/article/optimization-of-tuned-mass-damper-location-for-enhanced-chatter-suppression-in-thin-wall-milling/ %0 Journal Article %R 10.5545/sv-jme.2022.4 %& 339 %P 11 %J Strojniški vestnik - Journal of Mechanical Engineering %V 68 %N 5 %@ 0039-2480 %8 2022-02-14 %7 2022-02-14
Selvakumar, Mohanraj , Prabhu Raja Venugopal, & Gautham Velayudhan. "Optimization of Tuned Mass Damper Location for Enhanced Chatter Suppression in Thin-wall Milling." Strojniški vestnik - Journal of Mechanical Engineering [Online], 68.5 (2022): 339-349. Web. 20 Dec. 2024
TY - JOUR AU - Selvakumar, Mohanraj AU - Venugopal, Prabhu Raja AU - Velayudhan, Gautham PY - 2022 TI - Optimization of Tuned Mass Damper Location for Enhanced Chatter Suppression in Thin-wall Milling JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2022.4 KW - Chatter; thin-wall milling; tuned mass damper; response surface optimization; N2 - In this paper, a method to optimize the location of tuned mass damper (TMD) for enhancing chatter stability limits of thin-walled workpiece by using numerical techniques is proposed with due consideration to mass effect of TMD. The dominant mode of workpiece is identified from the simulated and measured frequency response functions of the workpiece. Two TMDs each having single degree of freedom are designed and a finite element model to predict the response of the workpiece-damper system is developed. The effect of damper location on the chatter stability of the thin-walled workpiece is investigated. Further, the locations for TMDs are optimized for enhanced chatter stability of workpiece by using response surface methodology. Milling tests were performed on workpiece with and without TMDs. A three-fold improvement in minimum stable depth of cut is realized after incorporating the TMDs at their optimal locations on thin-walled workpiece. UR - https://www.sv-jme.eu/sl/article/optimization-of-tuned-mass-damper-location-for-enhanced-chatter-suppression-in-thin-wall-milling/
@article{{sv-jme}{sv-jme.2022.4},
author = {Selvakumar, M., Venugopal, P., Velayudhan, G.},
title = {Optimization of Tuned Mass Damper Location for Enhanced Chatter Suppression in Thin-wall Milling},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {68},
number = {5},
year = {2022},
doi = {10.5545/sv-jme.2022.4},
url = {https://www.sv-jme.eu/sl/article/optimization-of-tuned-mass-damper-location-for-enhanced-chatter-suppression-in-thin-wall-milling/}
}
TY - JOUR AU - Selvakumar, Mohanraj AU - Venugopal, Prabhu Raja AU - Velayudhan, Gautham PY - 2022/02/14 TI - Optimization of Tuned Mass Damper Location for Enhanced Chatter Suppression in Thin-wall Milling JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 68, No 5 (2022): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2022.4 KW - Chatter, thin-wall milling, tuned mass damper, response surface optimization, N2 - In this paper, a method to optimize the location of tuned mass damper (TMD) for enhancing chatter stability limits of thin-walled workpiece by using numerical techniques is proposed with due consideration to mass effect of TMD. The dominant mode of workpiece is identified from the simulated and measured frequency response functions of the workpiece. Two TMDs each having single degree of freedom are designed and a finite element model to predict the response of the workpiece-damper system is developed. The effect of damper location on the chatter stability of the thin-walled workpiece is investigated. Further, the locations for TMDs are optimized for enhanced chatter stability of workpiece by using response surface methodology. Milling tests were performed on workpiece with and without TMDs. A three-fold improvement in minimum stable depth of cut is realized after incorporating the TMDs at their optimal locations on thin-walled workpiece. UR - https://www.sv-jme.eu/sl/article/optimization-of-tuned-mass-damper-location-for-enhanced-chatter-suppression-in-thin-wall-milling/
Selvakumar, Mohanraj , Venugopal, Prabhu Raja, AND Velayudhan, Gautham. "Optimization of Tuned Mass Damper Location for Enhanced Chatter Suppression in Thin-wall Milling" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 68 Number 5 (14 February 2022)
Strojniški vestnik - Journal of Mechanical Engineering 68(2022)5, 339-349
© The Authors 2022. CC BY 4.0 Int.
In this paper, a method to optimize the location of tuned mass damper (TMD) for enhancing chatter stability limits of thin-walled workpiece by using numerical techniques is proposed with due consideration to mass effect of TMD. The dominant mode of workpiece is identified from the simulated and measured frequency response functions of the workpiece. Two TMDs each having single degree of freedom are designed and a finite element model to predict the response of the workpiece-damper system is developed. The effect of damper location on the chatter stability of the thin-walled workpiece is investigated. Further, the locations for TMDs are optimized for enhanced chatter stability of workpiece by using response surface methodology. Milling tests were performed on workpiece with and without TMDs. A three-fold improvement in minimum stable depth of cut is realized after incorporating the TMDs at their optimal locations on thin-walled workpiece.