GOLDSCHMIDTBOEING, Frank ;PELZ, Uwe ;CLAIRE-ZIMMET, Karen ;WOLF, Michael ;GOERLACH, Ralf ;WOIAS, Peter . Bristle Motion, Forces, and Related Vertical Translation for a Novel Electric Toothbrush Design. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 66, n.9, p. 505-512, september 2020. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/bristle-motion-forces-and-related-vertical-translation-for-a-novel-electric-toothbrush-design/>. Date accessed: 01 sep. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2020.6665.
Goldschmidtboeing, F., Pelz, U., Claire-Zimmet, K., Wolf, M., Goerlach, R., & Woias, P. (2020). Bristle Motion, Forces, and Related Vertical Translation for a Novel Electric Toothbrush Design. Strojniški vestnik - Journal of Mechanical Engineering, 66(9), 505-512. doi:http://dx.doi.org/10.5545/sv-jme.2020.6665
@article{sv-jmesv-jme.2020.6665, author = {Frank Goldschmidtboeing and Uwe Pelz and Karen Claire-Zimmet and Michael Wolf and Ralf Goerlach and Peter Woias}, title = {Bristle Motion, Forces, and Related Vertical Translation for a Novel Electric Toothbrush Design}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {66}, number = {9}, year = {2020}, keywords = {single filament theory, electric toothbrush, bristle motion, bristle forces, inclined toothbrush filaments}, abstract = {This paper presents a combination of theoretical and experimental techniques applied to characterize the bristle motion, forces, and related vertical translation for a novel electric toothbrush design with a linear drive system. Results of the theoretical description, based on a single filament, were successfully compared with laboratory-based investigations: force measurements and high-speed video analysis, and tracking the toothbrush motion. This work describes the vertical translation induced in the toothbrush head, of up to 250 μm, when the toothbrush bristles are applied against a contact surface at brushing loads of approximately 1 N to 2.5 N. Using these techniques, including Fast-Fourier transform analysis, it is shown that the vertical motion of the head is composed of the driving frequency and its harmonics.}, issn = {0039-2480}, pages = {505-512}, doi = {10.5545/sv-jme.2020.6665}, url = {https://www.sv-jme.eu/sl/article/bristle-motion-forces-and-related-vertical-translation-for-a-novel-electric-toothbrush-design/} }
Goldschmidtboeing, F.,Pelz, U.,Claire-Zimmet, K.,Wolf, M.,Goerlach, R.,Woias, P. 2020 September 66. Bristle Motion, Forces, and Related Vertical Translation for a Novel Electric Toothbrush Design. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 66:9
%A Goldschmidtboeing, Frank %A Pelz, Uwe %A Claire-Zimmet, Karen %A Wolf, Michael %A Goerlach, Ralf %A Woias, Peter %D 2020 %T Bristle Motion, Forces, and Related Vertical Translation for a Novel Electric Toothbrush Design %B 2020 %9 single filament theory, electric toothbrush, bristle motion, bristle forces, inclined toothbrush filaments %! Bristle Motion, Forces, and Related Vertical Translation for a Novel Electric Toothbrush Design %K single filament theory, electric toothbrush, bristle motion, bristle forces, inclined toothbrush filaments %X This paper presents a combination of theoretical and experimental techniques applied to characterize the bristle motion, forces, and related vertical translation for a novel electric toothbrush design with a linear drive system. Results of the theoretical description, based on a single filament, were successfully compared with laboratory-based investigations: force measurements and high-speed video analysis, and tracking the toothbrush motion. This work describes the vertical translation induced in the toothbrush head, of up to 250 μm, when the toothbrush bristles are applied against a contact surface at brushing loads of approximately 1 N to 2.5 N. Using these techniques, including Fast-Fourier transform analysis, it is shown that the vertical motion of the head is composed of the driving frequency and its harmonics. %U https://www.sv-jme.eu/sl/article/bristle-motion-forces-and-related-vertical-translation-for-a-novel-electric-toothbrush-design/ %0 Journal Article %R 10.5545/sv-jme.2020.6665 %& 505 %P 8 %J Strojniški vestnik - Journal of Mechanical Engineering %V 66 %N 9 %@ 0039-2480 %8 2020-09-17 %7 2020-09-17
Goldschmidtboeing, Frank, Uwe Pelz, Karen Claire-Zimmet, Michael Wolf, Ralf Goerlach, & Peter Woias. "Bristle Motion, Forces, and Related Vertical Translation for a Novel Electric Toothbrush Design." Strojniški vestnik - Journal of Mechanical Engineering [Online], 66.9 (2020): 505-512. Web. 01 Sep. 2024
TY - JOUR AU - Goldschmidtboeing, Frank AU - Pelz, Uwe AU - Claire-Zimmet, Karen AU - Wolf, Michael AU - Goerlach, Ralf AU - Woias, Peter PY - 2020 TI - Bristle Motion, Forces, and Related Vertical Translation for a Novel Electric Toothbrush Design JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2020.6665 KW - single filament theory, electric toothbrush, bristle motion, bristle forces, inclined toothbrush filaments N2 - This paper presents a combination of theoretical and experimental techniques applied to characterize the bristle motion, forces, and related vertical translation for a novel electric toothbrush design with a linear drive system. Results of the theoretical description, based on a single filament, were successfully compared with laboratory-based investigations: force measurements and high-speed video analysis, and tracking the toothbrush motion. This work describes the vertical translation induced in the toothbrush head, of up to 250 μm, when the toothbrush bristles are applied against a contact surface at brushing loads of approximately 1 N to 2.5 N. Using these techniques, including Fast-Fourier transform analysis, it is shown that the vertical motion of the head is composed of the driving frequency and its harmonics. UR - https://www.sv-jme.eu/sl/article/bristle-motion-forces-and-related-vertical-translation-for-a-novel-electric-toothbrush-design/
@article{{sv-jme}{sv-jme.2020.6665}, author = {Goldschmidtboeing, F., Pelz, U., Claire-Zimmet, K., Wolf, M., Goerlach, R., Woias, P.}, title = {Bristle Motion, Forces, and Related Vertical Translation for a Novel Electric Toothbrush Design}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {66}, number = {9}, year = {2020}, doi = {10.5545/sv-jme.2020.6665}, url = {https://www.sv-jme.eu/sl/article/bristle-motion-forces-and-related-vertical-translation-for-a-novel-electric-toothbrush-design/} }
TY - JOUR AU - Goldschmidtboeing, Frank AU - Pelz, Uwe AU - Claire-Zimmet, Karen AU - Wolf, Michael AU - Goerlach, Ralf AU - Woias, Peter PY - 2020/09/17 TI - Bristle Motion, Forces, and Related Vertical Translation for a Novel Electric Toothbrush Design JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 66, No 9 (2020): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2020.6665 KW - single filament theory, electric toothbrush, bristle motion, bristle forces, inclined toothbrush filaments N2 - This paper presents a combination of theoretical and experimental techniques applied to characterize the bristle motion, forces, and related vertical translation for a novel electric toothbrush design with a linear drive system. Results of the theoretical description, based on a single filament, were successfully compared with laboratory-based investigations: force measurements and high-speed video analysis, and tracking the toothbrush motion. This work describes the vertical translation induced in the toothbrush head, of up to 250 μm, when the toothbrush bristles are applied against a contact surface at brushing loads of approximately 1 N to 2.5 N. Using these techniques, including Fast-Fourier transform analysis, it is shown that the vertical motion of the head is composed of the driving frequency and its harmonics. UR - https://www.sv-jme.eu/sl/article/bristle-motion-forces-and-related-vertical-translation-for-a-novel-electric-toothbrush-design/
Goldschmidtboeing, Frank, Pelz, Uwe, Claire-Zimmet, Karen, Wolf, Michael, Goerlach, Ralf, AND Woias, Peter. "Bristle Motion, Forces, and Related Vertical Translation for a Novel Electric Toothbrush Design" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 66 Number 9 (17 September 2020)
Strojniški vestnik - Journal of Mechanical Engineering 66(2020)9, 505-512
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
This paper presents a combination of theoretical and experimental techniques applied to characterize the bristle motion, forces, and related vertical translation for a novel electric toothbrush design with a linear drive system. Results of the theoretical description, based on a single filament, were successfully compared with laboratory-based investigations: force measurements and high-speed video analysis, and tracking the toothbrush motion. This work describes the vertical translation induced in the toothbrush head, of up to 250 μm, when the toothbrush bristles are applied against a contact surface at brushing loads of approximately 1 N to 2.5 N. Using these techniques, including Fast-Fourier transform analysis, it is shown that the vertical motion of the head is composed of the driving frequency and its harmonics.