HATOS, István ;FEKETE, Imre ;IBRIKSZ, Tamás ;KOVÁCS, József G.;MAROS, Mária B.;HARGITAI, Hajnalka . Surface Modification and Wear Properties of Direct Metal Laser Sintered Hybrid Tools Used in Moulds. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 64, n.2, p. 121-129, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/surface-modification-and-wear-properties-of-selective-laser-sintered-hybrid-tools-used-in-molds-2/>. Date accessed: 31 aug. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2017.4942.
Hatos, I., Fekete, I., Ibriksz, T., Kovács, J., Maros, M., & Hargitai, H. (2018). Surface Modification and Wear Properties of Direct Metal Laser Sintered Hybrid Tools Used in Moulds. Strojniški vestnik - Journal of Mechanical Engineering, 64(2), 121-129. doi:http://dx.doi.org/10.5545/sv-jme.2017.4942
@article{sv-jmesv-jme.2017.4942, author = {István Hatos and Imre Fekete and Tamás Ibriksz and József G. Kovács and Mária B. Maros and Hajnalka Hargitai}, title = {Surface Modification and Wear Properties of Direct Metal Laser Sintered Hybrid Tools Used in Moulds}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {64}, number = {2}, year = {2018}, keywords = {direct metal laser sintering; hybrid structure; maraging steel; 1.2343 steel; heat treating; wear}, abstract = {Injection moulding is one of the most productive plastic forming processes. Product development and the reduction of production time require new solutions in tooling design and manufacturing. Direct metal laser sintering (DMLS) allows moulds to be built with special cooling systems, which offer curved cooling lines that can follow the geometry of the part (conformal cooling). One disadvantage of DMLS, its high cost, can be dramatically reduced with the building of hybrid structures. With conventional tool steels as the base plate and only the special geometry of the part sintered on the top, the final geometry can be manufactured after sintering by conventional process technologies. We produced hybrid structures by direct metal laser sintering maraging steel (MS1) powder onto the surface of commercial mould steels and studied the effect of different heat treatments on porosity, tribological behaviour and the microstructure. The transition zone was also characterized.}, issn = {0039-2480}, pages = {121-129}, doi = {10.5545/sv-jme.2017.4942}, url = {https://www.sv-jme.eu/sl/article/surface-modification-and-wear-properties-of-selective-laser-sintered-hybrid-tools-used-in-molds-2/} }
Hatos, I.,Fekete, I.,Ibriksz, T.,Kovács, J.,Maros, M.,Hargitai, H. 2018 June 64. Surface Modification and Wear Properties of Direct Metal Laser Sintered Hybrid Tools Used in Moulds. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 64:2
%A Hatos, István %A Fekete, Imre %A Ibriksz, Tamás %A Kovács, József G. %A Maros, Mária B. %A Hargitai, Hajnalka %D 2018 %T Surface Modification and Wear Properties of Direct Metal Laser Sintered Hybrid Tools Used in Moulds %B 2018 %9 direct metal laser sintering; hybrid structure; maraging steel; 1.2343 steel; heat treating; wear %! Surface Modification and Wear Properties of Direct Metal Laser Sintered Hybrid Tools Used in Moulds %K direct metal laser sintering; hybrid structure; maraging steel; 1.2343 steel; heat treating; wear %X Injection moulding is one of the most productive plastic forming processes. Product development and the reduction of production time require new solutions in tooling design and manufacturing. Direct metal laser sintering (DMLS) allows moulds to be built with special cooling systems, which offer curved cooling lines that can follow the geometry of the part (conformal cooling). One disadvantage of DMLS, its high cost, can be dramatically reduced with the building of hybrid structures. With conventional tool steels as the base plate and only the special geometry of the part sintered on the top, the final geometry can be manufactured after sintering by conventional process technologies. We produced hybrid structures by direct metal laser sintering maraging steel (MS1) powder onto the surface of commercial mould steels and studied the effect of different heat treatments on porosity, tribological behaviour and the microstructure. The transition zone was also characterized. %U https://www.sv-jme.eu/sl/article/surface-modification-and-wear-properties-of-selective-laser-sintered-hybrid-tools-used-in-molds-2/ %0 Journal Article %R 10.5545/sv-jme.2017.4942 %& 121 %P 9 %J Strojniški vestnik - Journal of Mechanical Engineering %V 64 %N 2 %@ 0039-2480 %8 2018-06-26 %7 2018-06-26
Hatos, István, Imre Fekete, Tamás Ibriksz, József G. Kovács, Mária B. Maros, & Hajnalka Hargitai. "Surface Modification and Wear Properties of Direct Metal Laser Sintered Hybrid Tools Used in Moulds." Strojniški vestnik - Journal of Mechanical Engineering [Online], 64.2 (2018): 121-129. Web. 31 Aug. 2024
TY - JOUR AU - Hatos, István AU - Fekete, Imre AU - Ibriksz, Tamás AU - Kovács, József G. AU - Maros, Mária B. AU - Hargitai, Hajnalka PY - 2018 TI - Surface Modification and Wear Properties of Direct Metal Laser Sintered Hybrid Tools Used in Moulds JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2017.4942 KW - direct metal laser sintering; hybrid structure; maraging steel; 1.2343 steel; heat treating; wear N2 - Injection moulding is one of the most productive plastic forming processes. Product development and the reduction of production time require new solutions in tooling design and manufacturing. Direct metal laser sintering (DMLS) allows moulds to be built with special cooling systems, which offer curved cooling lines that can follow the geometry of the part (conformal cooling). One disadvantage of DMLS, its high cost, can be dramatically reduced with the building of hybrid structures. With conventional tool steels as the base plate and only the special geometry of the part sintered on the top, the final geometry can be manufactured after sintering by conventional process technologies. We produced hybrid structures by direct metal laser sintering maraging steel (MS1) powder onto the surface of commercial mould steels and studied the effect of different heat treatments on porosity, tribological behaviour and the microstructure. The transition zone was also characterized. UR - https://www.sv-jme.eu/sl/article/surface-modification-and-wear-properties-of-selective-laser-sintered-hybrid-tools-used-in-molds-2/
@article{{sv-jme}{sv-jme.2017.4942}, author = {Hatos, I., Fekete, I., Ibriksz, T., Kovács, J., Maros, M., Hargitai, H.}, title = {Surface Modification and Wear Properties of Direct Metal Laser Sintered Hybrid Tools Used in Moulds}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {64}, number = {2}, year = {2018}, doi = {10.5545/sv-jme.2017.4942}, url = {https://www.sv-jme.eu/sl/article/surface-modification-and-wear-properties-of-selective-laser-sintered-hybrid-tools-used-in-molds-2/} }
TY - JOUR AU - Hatos, István AU - Fekete, Imre AU - Ibriksz, Tamás AU - Kovács, József G. AU - Maros, Mária B. AU - Hargitai, Hajnalka PY - 2018/06/26 TI - Surface Modification and Wear Properties of Direct Metal Laser Sintered Hybrid Tools Used in Moulds JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 64, No 2 (2018): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2017.4942 KW - direct metal laser sintering, hybrid structure, maraging steel, 1.2343 steel, heat treating, wear N2 - Injection moulding is one of the most productive plastic forming processes. Product development and the reduction of production time require new solutions in tooling design and manufacturing. Direct metal laser sintering (DMLS) allows moulds to be built with special cooling systems, which offer curved cooling lines that can follow the geometry of the part (conformal cooling). One disadvantage of DMLS, its high cost, can be dramatically reduced with the building of hybrid structures. With conventional tool steels as the base plate and only the special geometry of the part sintered on the top, the final geometry can be manufactured after sintering by conventional process technologies. We produced hybrid structures by direct metal laser sintering maraging steel (MS1) powder onto the surface of commercial mould steels and studied the effect of different heat treatments on porosity, tribological behaviour and the microstructure. The transition zone was also characterized. UR - https://www.sv-jme.eu/sl/article/surface-modification-and-wear-properties-of-selective-laser-sintered-hybrid-tools-used-in-molds-2/
Hatos, István, Fekete, Imre, Ibriksz, Tamás, Kovács, József, Maros, Mária, AND Hargitai, Hajnalka. "Surface Modification and Wear Properties of Direct Metal Laser Sintered Hybrid Tools Used in Moulds" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 64 Number 2 (26 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 64(2018)2, 121-129
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
Injection moulding is one of the most productive plastic forming processes. Product development and the reduction of production time require new solutions in tooling design and manufacturing. Direct metal laser sintering (DMLS) allows moulds to be built with special cooling systems, which offer curved cooling lines that can follow the geometry of the part (conformal cooling). One disadvantage of DMLS, its high cost, can be dramatically reduced with the building of hybrid structures. With conventional tool steels as the base plate and only the special geometry of the part sintered on the top, the final geometry can be manufactured after sintering by conventional process technologies. We produced hybrid structures by direct metal laser sintering maraging steel (MS1) powder onto the surface of commercial mould steels and studied the effect of different heat treatments on porosity, tribological behaviour and the microstructure. The transition zone was also characterized.