MANKOVITS, Tamás ;VARGA, Tamás Antal ;MANÓ, Sándor ;KOCSIS, Imre . Compressive Response Determination of Closed-Cell Aluminium Foam and Linear-Elastic Finite Element Simulation of μCT-Based Directly Reconstructed Geometrical Models. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 64, n.2, p. 105-113, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/compressive-response-determination-of-closed-cell-aluminum-foam-using-image-based-geometrical-modeling-and-finite-element-simulation/>. Date accessed: 31 aug. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2017.5048.
Mankovits, T., Varga, T., Manó, S., & Kocsis, I. (2018). Compressive Response Determination of Closed-Cell Aluminium Foam and Linear-Elastic Finite Element Simulation of μCT-Based Directly Reconstructed Geometrical Models. Strojniški vestnik - Journal of Mechanical Engineering, 64(2), 105-113. doi:http://dx.doi.org/10.5545/sv-jme.2017.5048
@article{sv-jmesv-jme.2017.5048, author = {Tamás Mankovits and Tamás Antal Varga and Sándor Manó and Imre Kocsis}, title = {Compressive Response Determination of Closed-Cell Aluminium Foam and Linear-Elastic Finite Element Simulation of μCT-Based Directly Reconstructed Geometrical Models}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {64}, number = {2}, year = {2018}, keywords = {closed cell foam; geometrical reconstruction; compression test; FEM}, abstract = {The development of an efficient procedure for three-dimensional modelling and finite element simulation of metal foams remains one of the greatest challenges for engineers. The numerical determination of compressive properties of foam structure is a demanding engineering task and is indispensable for design purposes. In the design of load-bearing metal foam structures, the elastic behaviour under working circumstances must be considered and for the engineering calculations on the actual foam structure its precise geometrical modelling is necessary. Closed-cell aluminium foam produced from Duralcan F3.S.20S metal matrix composite (MMC) and fabricated by direct foaming technique is analysed. To ensure full comparability, specimens are characterized according to the ruling standard for compression test for porous materials. In this paper, a manual geometrical reconstruction process based on evaluation of images given by X-ray computed tomography and the related finite element calculations is introduced. The proposed procedure is capable of investigating the actual structure as a three-dimensional problem from any kind of material that can be analysed on the basis of computed tomography (CT) images. The geometrical reconstruction and the finite element calculation results show good correlation with the measured values in the elastic, which proves the utility of the presented method.}, issn = {0039-2480}, pages = {105-113}, doi = {10.5545/sv-jme.2017.5048}, url = {https://www.sv-jme.eu/sl/article/compressive-response-determination-of-closed-cell-aluminum-foam-using-image-based-geometrical-modeling-and-finite-element-simulation/} }
Mankovits, T.,Varga, T.,Manó, S.,Kocsis, I. 2018 June 64. Compressive Response Determination of Closed-Cell Aluminium Foam and Linear-Elastic Finite Element Simulation of μCT-Based Directly Reconstructed Geometrical Models. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 64:2
%A Mankovits, Tamás %A Varga, Tamás Antal %A Manó, Sándor %A Kocsis, Imre %D 2018 %T Compressive Response Determination of Closed-Cell Aluminium Foam and Linear-Elastic Finite Element Simulation of μCT-Based Directly Reconstructed Geometrical Models %B 2018 %9 closed cell foam; geometrical reconstruction; compression test; FEM %! Compressive Response Determination of Closed-Cell Aluminium Foam and Linear-Elastic Finite Element Simulation of μCT-Based Directly Reconstructed Geometrical Models %K closed cell foam; geometrical reconstruction; compression test; FEM %X The development of an efficient procedure for three-dimensional modelling and finite element simulation of metal foams remains one of the greatest challenges for engineers. The numerical determination of compressive properties of foam structure is a demanding engineering task and is indispensable for design purposes. In the design of load-bearing metal foam structures, the elastic behaviour under working circumstances must be considered and for the engineering calculations on the actual foam structure its precise geometrical modelling is necessary. Closed-cell aluminium foam produced from Duralcan F3.S.20S metal matrix composite (MMC) and fabricated by direct foaming technique is analysed. To ensure full comparability, specimens are characterized according to the ruling standard for compression test for porous materials. In this paper, a manual geometrical reconstruction process based on evaluation of images given by X-ray computed tomography and the related finite element calculations is introduced. The proposed procedure is capable of investigating the actual structure as a three-dimensional problem from any kind of material that can be analysed on the basis of computed tomography (CT) images. The geometrical reconstruction and the finite element calculation results show good correlation with the measured values in the elastic, which proves the utility of the presented method. %U https://www.sv-jme.eu/sl/article/compressive-response-determination-of-closed-cell-aluminum-foam-using-image-based-geometrical-modeling-and-finite-element-simulation/ %0 Journal Article %R 10.5545/sv-jme.2017.5048 %& 105 %P 9 %J Strojniški vestnik - Journal of Mechanical Engineering %V 64 %N 2 %@ 0039-2480 %8 2018-06-26 %7 2018-06-26
Mankovits, Tamás, Tamás Antal Varga, Sándor Manó, & Imre Kocsis. "Compressive Response Determination of Closed-Cell Aluminium Foam and Linear-Elastic Finite Element Simulation of μCT-Based Directly Reconstructed Geometrical Models." Strojniški vestnik - Journal of Mechanical Engineering [Online], 64.2 (2018): 105-113. Web. 31 Aug. 2024
TY - JOUR AU - Mankovits, Tamás AU - Varga, Tamás Antal AU - Manó, Sándor AU - Kocsis, Imre PY - 2018 TI - Compressive Response Determination of Closed-Cell Aluminium Foam and Linear-Elastic Finite Element Simulation of μCT-Based Directly Reconstructed Geometrical Models JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2017.5048 KW - closed cell foam; geometrical reconstruction; compression test; FEM N2 - The development of an efficient procedure for three-dimensional modelling and finite element simulation of metal foams remains one of the greatest challenges for engineers. The numerical determination of compressive properties of foam structure is a demanding engineering task and is indispensable for design purposes. In the design of load-bearing metal foam structures, the elastic behaviour under working circumstances must be considered and for the engineering calculations on the actual foam structure its precise geometrical modelling is necessary. Closed-cell aluminium foam produced from Duralcan F3.S.20S metal matrix composite (MMC) and fabricated by direct foaming technique is analysed. To ensure full comparability, specimens are characterized according to the ruling standard for compression test for porous materials. In this paper, a manual geometrical reconstruction process based on evaluation of images given by X-ray computed tomography and the related finite element calculations is introduced. The proposed procedure is capable of investigating the actual structure as a three-dimensional problem from any kind of material that can be analysed on the basis of computed tomography (CT) images. The geometrical reconstruction and the finite element calculation results show good correlation with the measured values in the elastic, which proves the utility of the presented method. UR - https://www.sv-jme.eu/sl/article/compressive-response-determination-of-closed-cell-aluminum-foam-using-image-based-geometrical-modeling-and-finite-element-simulation/
@article{{sv-jme}{sv-jme.2017.5048}, author = {Mankovits, T., Varga, T., Manó, S., Kocsis, I.}, title = {Compressive Response Determination of Closed-Cell Aluminium Foam and Linear-Elastic Finite Element Simulation of μCT-Based Directly Reconstructed Geometrical Models}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {64}, number = {2}, year = {2018}, doi = {10.5545/sv-jme.2017.5048}, url = {https://www.sv-jme.eu/sl/article/compressive-response-determination-of-closed-cell-aluminum-foam-using-image-based-geometrical-modeling-and-finite-element-simulation/} }
TY - JOUR AU - Mankovits, Tamás AU - Varga, Tamás Antal AU - Manó, Sándor AU - Kocsis, Imre PY - 2018/06/26 TI - Compressive Response Determination of Closed-Cell Aluminium Foam and Linear-Elastic Finite Element Simulation of μCT-Based Directly Reconstructed Geometrical Models JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 64, No 2 (2018): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2017.5048 KW - closed cell foam, geometrical reconstruction, compression test, FEM N2 - The development of an efficient procedure for three-dimensional modelling and finite element simulation of metal foams remains one of the greatest challenges for engineers. The numerical determination of compressive properties of foam structure is a demanding engineering task and is indispensable for design purposes. In the design of load-bearing metal foam structures, the elastic behaviour under working circumstances must be considered and for the engineering calculations on the actual foam structure its precise geometrical modelling is necessary. Closed-cell aluminium foam produced from Duralcan F3.S.20S metal matrix composite (MMC) and fabricated by direct foaming technique is analysed. To ensure full comparability, specimens are characterized according to the ruling standard for compression test for porous materials. In this paper, a manual geometrical reconstruction process based on evaluation of images given by X-ray computed tomography and the related finite element calculations is introduced. The proposed procedure is capable of investigating the actual structure as a three-dimensional problem from any kind of material that can be analysed on the basis of computed tomography (CT) images. The geometrical reconstruction and the finite element calculation results show good correlation with the measured values in the elastic, which proves the utility of the presented method. UR - https://www.sv-jme.eu/sl/article/compressive-response-determination-of-closed-cell-aluminum-foam-using-image-based-geometrical-modeling-and-finite-element-simulation/
Mankovits, Tamás, Varga, Tamás Antal, Manó, Sándor, AND Kocsis, Imre. "Compressive Response Determination of Closed-Cell Aluminium Foam and Linear-Elastic Finite Element Simulation of μCT-Based Directly Reconstructed Geometrical Models" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 64 Number 2 (26 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 64(2018)2, 105-113
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
The development of an efficient procedure for three-dimensional modelling and finite element simulation of metal foams remains one of the greatest challenges for engineers. The numerical determination of compressive properties of foam structure is a demanding engineering task and is indispensable for design purposes. In the design of load-bearing metal foam structures, the elastic behaviour under working circumstances must be considered and for the engineering calculations on the actual foam structure its precise geometrical modelling is necessary. Closed-cell aluminium foam produced from Duralcan F3.S.20S metal matrix composite (MMC) and fabricated by direct foaming technique is analysed. To ensure full comparability, specimens are characterized according to the ruling standard for compression test for porous materials. In this paper, a manual geometrical reconstruction process based on evaluation of images given by X-ray computed tomography and the related finite element calculations is introduced. The proposed procedure is capable of investigating the actual structure as a three-dimensional problem from any kind of material that can be analysed on the basis of computed tomography (CT) images. The geometrical reconstruction and the finite element calculation results show good correlation with the measured values in the elastic, which proves the utility of the presented method.