Calibration of stimulation results

NARDIN, Blaž ;KADIŠ, Franc .
Calibration of stimulation results. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 45, n.6, p. 250-256, july 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/calibration-of-stimulation-results/>. Date accessed: 23 nov. 2024. 
doi:http://dx.doi.org/.

Nardin, B., & Kadiš, F.
(1999).
Calibration of stimulation results.
Strojniški vestnik - Journal of Mechanical Engineering, 45(6), 250-256.
doi:http://dx.doi.org/

@article{.,
	author = {Blaž  Nardin and Franc  Kadiš},
	title = {Calibration of stimulation results},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {45},
	number = {6},
	year = {1999},
	keywords = {product development; simulation; comparison of result; concurrent engineering; },
	abstract = {At the conference ICIT'97 (International Conference on Industrial Tools) the paper was presented by the same authors, where the introduction of CAE (Computer Aided Engineering) techniques in the development of a completely new product was described. As a logical continuation of that work, in this paper the authors wish to present how these results were transferred to real life and how they were implemented. In this paper some results are presented as the function of mould geometry. The main results which we compare are the results of fill time, ejection time and peak temperature. Also the progress on the decision diagram is presented.},
	issn = {0039-2480},	pages = {250-256},	doi = {},
	url = {https://www.sv-jme.eu/sl/article/calibration-of-stimulation-results/}
}

Nardin, B.,Kadiš, F.
1999 July 45. Calibration of stimulation results. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 45:6

%A Nardin, Blaž 
%A Kadiš, Franc 
%D 1999
%T Calibration of stimulation results
%B 1999
%9 product development; simulation; comparison of result; concurrent engineering; 
%! Calibration of stimulation results
%K product development; simulation; comparison of result; concurrent engineering; 
%X At the conference ICIT'97 (International Conference on Industrial Tools) the paper was presented by the same authors, where the introduction of CAE (Computer Aided Engineering) techniques in the development of a completely new product was described. As a logical continuation of that work, in this paper the authors wish to present how these results were transferred to real life and how they were implemented. In this paper some results are presented as the function of mould geometry. The main results which we compare are the results of fill time, ejection time and peak temperature. Also the progress on the decision diagram is presented.
%U https://www.sv-jme.eu/sl/article/calibration-of-stimulation-results/
%0 Journal Article
%R 
%& 250
%P 7
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 45
%N 6
%@ 0039-2480
%8 2017-07-07
%7 2017-07-07

Nardin, Blaž, & Franc  Kadiš.
"Calibration of stimulation results." Strojniški vestnik - Journal of Mechanical Engineering [Online], 45.6 (1999): 250-256. Web.  23 Nov. 2024

TY  - JOUR
AU  - Nardin, Blaž 
AU  - Kadiš, Franc 
PY  - 1999
TI  - Calibration of stimulation results
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - product development; simulation; comparison of result; concurrent engineering; 
N2  - At the conference ICIT'97 (International Conference on Industrial Tools) the paper was presented by the same authors, where the introduction of CAE (Computer Aided Engineering) techniques in the development of a completely new product was described. As a logical continuation of that work, in this paper the authors wish to present how these results were transferred to real life and how they were implemented. In this paper some results are presented as the function of mould geometry. The main results which we compare are the results of fill time, ejection time and peak temperature. Also the progress on the decision diagram is presented.
UR  - https://www.sv-jme.eu/sl/article/calibration-of-stimulation-results/

@article{{}{.},
	author = {Nardin, B., Kadiš, F.},
	title = {Calibration of stimulation results},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {45},
	number = {6},
	year = {1999},
	doi = {},
	url = {https://www.sv-jme.eu/sl/article/calibration-of-stimulation-results/}
}

TY  - JOUR
AU  - Nardin, Blaž 
AU  - Kadiš, Franc 
PY  - 2017/07/07
TI  - Calibration of stimulation results
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 45, No 6 (1999): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - product development, simulation, comparison of result, concurrent engineering, 
N2  - At the conference ICIT'97 (International Conference on Industrial Tools) the paper was presented by the same authors, where the introduction of CAE (Computer Aided Engineering) techniques in the development of a completely new product was described. As a logical continuation of that work, in this paper the authors wish to present how these results were transferred to real life and how they were implemented. In this paper some results are presented as the function of mould geometry. The main results which we compare are the results of fill time, ejection time and peak temperature. Also the progress on the decision diagram is presented.
UR  - https://www.sv-jme.eu/sl/article/calibration-of-stimulation-results/

Nardin, Blaž, AND Kadiš, Franc.
"Calibration of stimulation results" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 45 Number 6 (07 July 2017)