Micro-Irregularities of Metal Surfaces

MIKO, Edward .
Micro-Irregularities of Metal Surfaces. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 51, n.10, p. 634-645, august 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/micro-irregularities-of-metal-surfaces/>. Date accessed: 20 dec. 2024. 
doi:http://dx.doi.org/.

Miko, E.
(2005).
Micro-Irregularities of Metal Surfaces.
Strojniški vestnik - Journal of Mechanical Engineering, 51(10), 634-645.
doi:http://dx.doi.org/

@article{.,
	author = {Edward  Miko},
	title = {Micro-Irregularities of Metal Surfaces},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {51},
	number = {10},
	year = {2005},
	keywords = {ball-end mill; surface finish; cutters; setting; surface morphology; },
	abstract = {It has been established that machining parameters such as feed per tooth, rotational speed, tool path interval and cutter setting angle can influence the surface roughness during ball-end milling. A scanning electron microscope (SEM) was used to register and analyze the morphology of milled surfaces. SEM photographs of the surfaces with longitudinal and lateral profiles are included and discussed. The influence of the machining factors on the geometrical microstructure of the surface is also evaluated. A frequency analysis of the profiles of surfaces milled with a ball-end cutter is presented. The investigations show that the tool path interval has a considerable effect on the roughness of the milled surfaces.},
	issn = {0039-2480},	pages = {634-645},	doi = {},
	url = {https://www.sv-jme.eu/sl/article/micro-irregularities-of-metal-surfaces/}
}

Miko, E.
2005 August 51. Micro-Irregularities of Metal Surfaces. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 51:10

%A Miko, Edward 
%D 2005
%T Micro-Irregularities of Metal Surfaces
%B 2005
%9 ball-end mill; surface finish; cutters; setting; surface morphology; 
%! Micro-Irregularities of Metal Surfaces
%K ball-end mill; surface finish; cutters; setting; surface morphology; 
%X It has been established that machining parameters such as feed per tooth, rotational speed, tool path interval and cutter setting angle can influence the surface roughness during ball-end milling. A scanning electron microscope (SEM) was used to register and analyze the morphology of milled surfaces. SEM photographs of the surfaces with longitudinal and lateral profiles are included and discussed. The influence of the machining factors on the geometrical microstructure of the surface is also evaluated. A frequency analysis of the profiles of surfaces milled with a ball-end cutter is presented. The investigations show that the tool path interval has a considerable effect on the roughness of the milled surfaces.
%U https://www.sv-jme.eu/sl/article/micro-irregularities-of-metal-surfaces/
%0 Journal Article
%R 
%& 634
%P 12
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 51
%N 10
%@ 0039-2480
%8 2017-08-18
%7 2017-08-18

Miko, Edward.
"Micro-Irregularities of Metal Surfaces." Strojniški vestnik - Journal of Mechanical Engineering [Online], 51.10 (2005): 634-645. Web.  20 Dec. 2024

TY  - JOUR
AU  - Miko, Edward 
PY  - 2005
TI  - Micro-Irregularities of Metal Surfaces
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - ball-end mill; surface finish; cutters; setting; surface morphology; 
N2  - It has been established that machining parameters such as feed per tooth, rotational speed, tool path interval and cutter setting angle can influence the surface roughness during ball-end milling. A scanning electron microscope (SEM) was used to register and analyze the morphology of milled surfaces. SEM photographs of the surfaces with longitudinal and lateral profiles are included and discussed. The influence of the machining factors on the geometrical microstructure of the surface is also evaluated. A frequency analysis of the profiles of surfaces milled with a ball-end cutter is presented. The investigations show that the tool path interval has a considerable effect on the roughness of the milled surfaces.
UR  - https://www.sv-jme.eu/sl/article/micro-irregularities-of-metal-surfaces/

@article{{}{.},
	author = {Miko, E.},
	title = {Micro-Irregularities of Metal Surfaces},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {51},
	number = {10},
	year = {2005},
	doi = {},
	url = {https://www.sv-jme.eu/sl/article/micro-irregularities-of-metal-surfaces/}
}

TY  - JOUR
AU  - Miko, Edward 
PY  - 2017/08/18
TI  - Micro-Irregularities of Metal Surfaces
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 51, No 10 (2005): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - ball-end mill, surface finish, cutters, setting, surface morphology, 
N2  - It has been established that machining parameters such as feed per tooth, rotational speed, tool path interval and cutter setting angle can influence the surface roughness during ball-end milling. A scanning electron microscope (SEM) was used to register and analyze the morphology of milled surfaces. SEM photographs of the surfaces with longitudinal and lateral profiles are included and discussed. The influence of the machining factors on the geometrical microstructure of the surface is also evaluated. A frequency analysis of the profiles of surfaces milled with a ball-end cutter is presented. The investigations show that the tool path interval has a considerable effect on the roughness of the milled surfaces.
UR  - https://www.sv-jme.eu/sl/article/micro-irregularities-of-metal-surfaces/

Miko, Edward"Micro-Irregularities of Metal Surfaces" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 51 Number 10 (18 August 2017)