AČKO, Bojan ;ŠOŠTAR, Adolf . Modification of the Model for Measurement Evaluation in a Gauge-Block Calibration Based on Measurement Automation. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 48, n.1, p. 9-16, july 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/modification-of-the-model-for-measurement-evaluation-in-a-gauge-block-calibration-based-on-measurement-automation/>. Date accessed: 01 sep. 2024. doi:http://dx.doi.org/.
Ačko, B., & Šoštar, A. (2002). Modification of the Model for Measurement Evaluation in a Gauge-Block Calibration Based on Measurement Automation. Strojniški vestnik - Journal of Mechanical Engineering, 48(1), 9-16. doi:http://dx.doi.org/
@article{., author = {Bojan Ačko and Adolf Šoštar}, title = {Modification of the Model for Measurement Evaluation in a Gauge-Block Calibration Based on Measurement Automation}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {48}, number = {1}, year = {2002}, keywords = {length standards; measurements; calibrations; uncertainty of measurements; automation; }, abstract = {This paper treats models for evaluating the uncertainty of measurement during the calibration of length standards gauge blocks based on the mechanical comparative method. A modification of the existing model used in the classic calibration procedure for measurement conditions in the automated measurement is presented. Control over most input values of the mathematical model of the measurement is ensured by the automation, and as a consequence the standard uncertainties of these values and the combined uncertainty can be reduced. However, automation can also have some negative influences on the calibration result. Therefore it is very important that all possible influences on the uncertainty of the measurement are anticipated in advance when the automation is planned, and the method of automation is chosen after these influences are precisely analysed.}, issn = {0039-2480}, pages = {9-16}, doi = {}, url = {https://www.sv-jme.eu/sl/article/modification-of-the-model-for-measurement-evaluation-in-a-gauge-block-calibration-based-on-measurement-automation/} }
Ačko, B.,Šoštar, A. 2002 July 48. Modification of the Model for Measurement Evaluation in a Gauge-Block Calibration Based on Measurement Automation. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 48:1
%A Ačko, Bojan %A Šoštar, Adolf %D 2002 %T Modification of the Model for Measurement Evaluation in a Gauge-Block Calibration Based on Measurement Automation %B 2002 %9 length standards; measurements; calibrations; uncertainty of measurements; automation; %! Modification of the Model for Measurement Evaluation in a Gauge-Block Calibration Based on Measurement Automation %K length standards; measurements; calibrations; uncertainty of measurements; automation; %X This paper treats models for evaluating the uncertainty of measurement during the calibration of length standards gauge blocks based on the mechanical comparative method. A modification of the existing model used in the classic calibration procedure for measurement conditions in the automated measurement is presented. Control over most input values of the mathematical model of the measurement is ensured by the automation, and as a consequence the standard uncertainties of these values and the combined uncertainty can be reduced. However, automation can also have some negative influences on the calibration result. Therefore it is very important that all possible influences on the uncertainty of the measurement are anticipated in advance when the automation is planned, and the method of automation is chosen after these influences are precisely analysed. %U https://www.sv-jme.eu/sl/article/modification-of-the-model-for-measurement-evaluation-in-a-gauge-block-calibration-based-on-measurement-automation/ %0 Journal Article %R %& 9 %P 8 %J Strojniški vestnik - Journal of Mechanical Engineering %V 48 %N 1 %@ 0039-2480 %8 2017-07-07 %7 2017-07-07
Ačko, Bojan, & Adolf Šoštar. "Modification of the Model for Measurement Evaluation in a Gauge-Block Calibration Based on Measurement Automation." Strojniški vestnik - Journal of Mechanical Engineering [Online], 48.1 (2002): 9-16. Web. 01 Sep. 2024
TY - JOUR AU - Ačko, Bojan AU - Šoštar, Adolf PY - 2002 TI - Modification of the Model for Measurement Evaluation in a Gauge-Block Calibration Based on Measurement Automation JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - length standards; measurements; calibrations; uncertainty of measurements; automation; N2 - This paper treats models for evaluating the uncertainty of measurement during the calibration of length standards gauge blocks based on the mechanical comparative method. A modification of the existing model used in the classic calibration procedure for measurement conditions in the automated measurement is presented. Control over most input values of the mathematical model of the measurement is ensured by the automation, and as a consequence the standard uncertainties of these values and the combined uncertainty can be reduced. However, automation can also have some negative influences on the calibration result. Therefore it is very important that all possible influences on the uncertainty of the measurement are anticipated in advance when the automation is planned, and the method of automation is chosen after these influences are precisely analysed. UR - https://www.sv-jme.eu/sl/article/modification-of-the-model-for-measurement-evaluation-in-a-gauge-block-calibration-based-on-measurement-automation/
@article{{}{.}, author = {Ačko, B., Šoštar, A.}, title = {Modification of the Model for Measurement Evaluation in a Gauge-Block Calibration Based on Measurement Automation}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {48}, number = {1}, year = {2002}, doi = {}, url = {https://www.sv-jme.eu/sl/article/modification-of-the-model-for-measurement-evaluation-in-a-gauge-block-calibration-based-on-measurement-automation/} }
TY - JOUR AU - Ačko, Bojan AU - Šoštar, Adolf PY - 2017/07/07 TI - Modification of the Model for Measurement Evaluation in a Gauge-Block Calibration Based on Measurement Automation JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 48, No 1 (2002): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - length standards, measurements, calibrations, uncertainty of measurements, automation, N2 - This paper treats models for evaluating the uncertainty of measurement during the calibration of length standards gauge blocks based on the mechanical comparative method. A modification of the existing model used in the classic calibration procedure for measurement conditions in the automated measurement is presented. Control over most input values of the mathematical model of the measurement is ensured by the automation, and as a consequence the standard uncertainties of these values and the combined uncertainty can be reduced. However, automation can also have some negative influences on the calibration result. Therefore it is very important that all possible influences on the uncertainty of the measurement are anticipated in advance when the automation is planned, and the method of automation is chosen after these influences are precisely analysed. UR - https://www.sv-jme.eu/sl/article/modification-of-the-model-for-measurement-evaluation-in-a-gauge-block-calibration-based-on-measurement-automation/
Ačko, Bojan, AND Šoštar, Adolf. "Modification of the Model for Measurement Evaluation in a Gauge-Block Calibration Based on Measurement Automation" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 48 Number 1 (07 July 2017)
Strojniški vestnik - Journal of Mechanical Engineering 48(2002)1, 9-16
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
This paper treats models for evaluating the uncertainty of measurement during the calibration of length standards gauge blocks based on the mechanical comparative method. A modification of the existing model used in the classic calibration procedure for measurement conditions in the automated measurement is presented. Control over most input values of the mathematical model of the measurement is ensured by the automation, and as a consequence the standard uncertainties of these values and the combined uncertainty can be reduced. However, automation can also have some negative influences on the calibration result. Therefore it is very important that all possible influences on the uncertainty of the measurement are anticipated in advance when the automation is planned, and the method of automation is chosen after these influences are precisely analysed.