VOHAR, Bojan ;GOTLIH, Karl ;FLAŠKER, Jože . Optimization of Link-Drive Mechanism for Deep Drawing Mechanical Press. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 48, n.11, p. 601-612, july 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/optimization-of-link-drive-mechanism-for-deep-drawing-mechanical-press/>. Date accessed: 31 aug. 2024. doi:http://dx.doi.org/.
Vohar, B., Gotlih, K., & Flašker, J. (2002). Optimization of Link-Drive Mechanism for Deep Drawing Mechanical Press. Strojniški vestnik - Journal of Mechanical Engineering, 48(11), 601-612. doi:http://dx.doi.org/
@article{., author = {Bojan Vohar and Karl Gotlih and Jože Flašker}, title = {Optimization of Link-Drive Mechanism for Deep Drawing Mechanical Press}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {48}, number = {11}, year = {2002}, keywords = {:deep drawing; deep drawing press; link-drive mechanizm; optimization; modelling; }, abstract = {This paper deals with an example of a link-drive for a deep-drawing mechanical press. The existing design has proved unsatisfactory and does not meet all the demands and constraints which are required for this metal-forming process. Optimization of the drive is therefore necessary. The intention of this optimization is to achieve the required velocity characteristics in a defined area of movement. Firstly, the drive is analysed and a mathematical model is made. The whole process is time-dependent, so it cannot be used directly in the optimization algorithm. This mathematical model has first to be transformed into a form suitable for the standard non-linear optimization procedure and then the optimization is carried out. We use the method of sequential quadratic programming. The final objective of the optimization process is to find the dimensions of the link-drive members such that the given requirements are satisfied in the best possible manner. In conclusion, the results are described and compared with the initial design.}, issn = {0039-2480}, pages = {601-612}, doi = {}, url = {https://www.sv-jme.eu/sl/article/optimization-of-link-drive-mechanism-for-deep-drawing-mechanical-press/} }
Vohar, B.,Gotlih, K.,Flašker, J. 2002 July 48. Optimization of Link-Drive Mechanism for Deep Drawing Mechanical Press. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 48:11
%A Vohar, Bojan %A Gotlih, Karl %A Flašker, Jože %D 2002 %T Optimization of Link-Drive Mechanism for Deep Drawing Mechanical Press %B 2002 %9 :deep drawing; deep drawing press; link-drive mechanizm; optimization; modelling; %! Optimization of Link-Drive Mechanism for Deep Drawing Mechanical Press %K :deep drawing; deep drawing press; link-drive mechanizm; optimization; modelling; %X This paper deals with an example of a link-drive for a deep-drawing mechanical press. The existing design has proved unsatisfactory and does not meet all the demands and constraints which are required for this metal-forming process. Optimization of the drive is therefore necessary. The intention of this optimization is to achieve the required velocity characteristics in a defined area of movement. Firstly, the drive is analysed and a mathematical model is made. The whole process is time-dependent, so it cannot be used directly in the optimization algorithm. This mathematical model has first to be transformed into a form suitable for the standard non-linear optimization procedure and then the optimization is carried out. We use the method of sequential quadratic programming. The final objective of the optimization process is to find the dimensions of the link-drive members such that the given requirements are satisfied in the best possible manner. In conclusion, the results are described and compared with the initial design. %U https://www.sv-jme.eu/sl/article/optimization-of-link-drive-mechanism-for-deep-drawing-mechanical-press/ %0 Journal Article %R %& 601 %P 12 %J Strojniški vestnik - Journal of Mechanical Engineering %V 48 %N 11 %@ 0039-2480 %8 2017-07-07 %7 2017-07-07
Vohar, Bojan, Karl Gotlih, & Jože Flašker. "Optimization of Link-Drive Mechanism for Deep Drawing Mechanical Press." Strojniški vestnik - Journal of Mechanical Engineering [Online], 48.11 (2002): 601-612. Web. 31 Aug. 2024
TY - JOUR AU - Vohar, Bojan AU - Gotlih, Karl AU - Flašker, Jože PY - 2002 TI - Optimization of Link-Drive Mechanism for Deep Drawing Mechanical Press JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - :deep drawing; deep drawing press; link-drive mechanizm; optimization; modelling; N2 - This paper deals with an example of a link-drive for a deep-drawing mechanical press. The existing design has proved unsatisfactory and does not meet all the demands and constraints which are required for this metal-forming process. Optimization of the drive is therefore necessary. The intention of this optimization is to achieve the required velocity characteristics in a defined area of movement. Firstly, the drive is analysed and a mathematical model is made. The whole process is time-dependent, so it cannot be used directly in the optimization algorithm. This mathematical model has first to be transformed into a form suitable for the standard non-linear optimization procedure and then the optimization is carried out. We use the method of sequential quadratic programming. The final objective of the optimization process is to find the dimensions of the link-drive members such that the given requirements are satisfied in the best possible manner. In conclusion, the results are described and compared with the initial design. UR - https://www.sv-jme.eu/sl/article/optimization-of-link-drive-mechanism-for-deep-drawing-mechanical-press/
@article{{}{.}, author = {Vohar, B., Gotlih, K., Flašker, J.}, title = {Optimization of Link-Drive Mechanism for Deep Drawing Mechanical Press}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {48}, number = {11}, year = {2002}, doi = {}, url = {https://www.sv-jme.eu/sl/article/optimization-of-link-drive-mechanism-for-deep-drawing-mechanical-press/} }
TY - JOUR AU - Vohar, Bojan AU - Gotlih, Karl AU - Flašker, Jože PY - 2017/07/07 TI - Optimization of Link-Drive Mechanism for Deep Drawing Mechanical Press JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 48, No 11 (2002): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - :deep drawing, deep drawing press, link-drive mechanizm, optimization, modelling, N2 - This paper deals with an example of a link-drive for a deep-drawing mechanical press. The existing design has proved unsatisfactory and does not meet all the demands and constraints which are required for this metal-forming process. Optimization of the drive is therefore necessary. The intention of this optimization is to achieve the required velocity characteristics in a defined area of movement. Firstly, the drive is analysed and a mathematical model is made. The whole process is time-dependent, so it cannot be used directly in the optimization algorithm. This mathematical model has first to be transformed into a form suitable for the standard non-linear optimization procedure and then the optimization is carried out. We use the method of sequential quadratic programming. The final objective of the optimization process is to find the dimensions of the link-drive members such that the given requirements are satisfied in the best possible manner. In conclusion, the results are described and compared with the initial design. UR - https://www.sv-jme.eu/sl/article/optimization-of-link-drive-mechanism-for-deep-drawing-mechanical-press/
Vohar, Bojan, Gotlih, Karl, AND Flašker, Jože. "Optimization of Link-Drive Mechanism for Deep Drawing Mechanical Press" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 48 Number 11 (07 July 2017)
Strojniški vestnik - Journal of Mechanical Engineering 48(2002)11, 601-612
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
This paper deals with an example of a link-drive for a deep-drawing mechanical press. The existing design has proved unsatisfactory and does not meet all the demands and constraints which are required for this metal-forming process. Optimization of the drive is therefore necessary. The intention of this optimization is to achieve the required velocity characteristics in a defined area of movement. Firstly, the drive is analysed and a mathematical model is made. The whole process is time-dependent, so it cannot be used directly in the optimization algorithm. This mathematical model has first to be transformed into a form suitable for the standard non-linear optimization procedure and then the optimization is carried out. We use the method of sequential quadratic programming. The final objective of the optimization process is to find the dimensions of the link-drive members such that the given requirements are satisfied in the best possible manner. In conclusion, the results are described and compared with the initial design.