BUTALA, Vincenc ;NOVAK, Peter . General Model of the Combustion of a Single Coal Piece in Tubular Device with Controlled Air Flow. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 44, n.3-4, p. 117-128, november 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/general-model-of-the-combustion-of-a-single-coal-piece-in-tubular-device-with-controlled-air-flow/>. Date accessed: 20 dec. 2024. doi:http://dx.doi.org/.
Butala, V., & Novak, P. (1998). General Model of the Combustion of a Single Coal Piece in Tubular Device with Controlled Air Flow. Strojniški vestnik - Journal of Mechanical Engineering, 44(3-4), 117-128. doi:http://dx.doi.org/
@article{.,
author = {Vincenc Butala and Peter Novak},
title = {General Model of the Combustion of a Single Coal Piece in Tubular Device with Controlled Air Flow},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {44},
number = {3-4},
year = {1998},
keywords = {coal combustion; combustion velocity; analysis of combustion; combustion models; },
abstract = {The paper presents experimental research into the combustion of individual coal pieces with dimensions o f 6.5 x 4.7 x 3.8 cm and masses of 120 ± 7 g in a combustion pipe. The coal pieces were burned under known thermodynamic conditions in a convective air current, which served as an oxidant. Based on experimental data obtained from the combustion of single coal pieces, combustion rate (i.e. variation of fuel mass vs. time) was described using non-dimensional quantities. The non-dimensional combustion rate is given in correlation with non-dimensional time. Mutual factors are given in the form of polynomials with a large degree of adaption. The analysis of coal combustion in a three-dimensional space was made by the introduction of non-dimensional combustion air flow velocity. It was found that the non-dimensional combustion rate of the combustion of coal pieces does not depend on non-dimensional combustion air flow velocity or temperature.},
issn = {0039-2480}, pages = {117-128}, doi = {},
url = {https://www.sv-jme.eu/sl/article/general-model-of-the-combustion-of-a-single-coal-piece-in-tubular-device-with-controlled-air-flow/}
}
Butala, V.,Novak, P. 1998 November 44. General Model of the Combustion of a Single Coal Piece in Tubular Device with Controlled Air Flow. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 44:3-4
%A Butala, Vincenc %A Novak, Peter %D 1998 %T General Model of the Combustion of a Single Coal Piece in Tubular Device with Controlled Air Flow %B 1998 %9 coal combustion; combustion velocity; analysis of combustion; combustion models; %! General Model of the Combustion of a Single Coal Piece in Tubular Device with Controlled Air Flow %K coal combustion; combustion velocity; analysis of combustion; combustion models; %X The paper presents experimental research into the combustion of individual coal pieces with dimensions o f 6.5 x 4.7 x 3.8 cm and masses of 120 ± 7 g in a combustion pipe. The coal pieces were burned under known thermodynamic conditions in a convective air current, which served as an oxidant. Based on experimental data obtained from the combustion of single coal pieces, combustion rate (i.e. variation of fuel mass vs. time) was described using non-dimensional quantities. The non-dimensional combustion rate is given in correlation with non-dimensional time. Mutual factors are given in the form of polynomials with a large degree of adaption. The analysis of coal combustion in a three-dimensional space was made by the introduction of non-dimensional combustion air flow velocity. It was found that the non-dimensional combustion rate of the combustion of coal pieces does not depend on non-dimensional combustion air flow velocity or temperature. %U https://www.sv-jme.eu/sl/article/general-model-of-the-combustion-of-a-single-coal-piece-in-tubular-device-with-controlled-air-flow/ %0 Journal Article %R %& 117 %P 12 %J Strojniški vestnik - Journal of Mechanical Engineering %V 44 %N 3-4 %@ 0039-2480 %8 2017-11-11 %7 2017-11-11
Butala, Vincenc, & Peter Novak. "General Model of the Combustion of a Single Coal Piece in Tubular Device with Controlled Air Flow." Strojniški vestnik - Journal of Mechanical Engineering [Online], 44.3-4 (1998): 117-128. Web. 20 Dec. 2024
TY - JOUR AU - Butala, Vincenc AU - Novak, Peter PY - 1998 TI - General Model of the Combustion of a Single Coal Piece in Tubular Device with Controlled Air Flow JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - coal combustion; combustion velocity; analysis of combustion; combustion models; N2 - The paper presents experimental research into the combustion of individual coal pieces with dimensions o f 6.5 x 4.7 x 3.8 cm and masses of 120 ± 7 g in a combustion pipe. The coal pieces were burned under known thermodynamic conditions in a convective air current, which served as an oxidant. Based on experimental data obtained from the combustion of single coal pieces, combustion rate (i.e. variation of fuel mass vs. time) was described using non-dimensional quantities. The non-dimensional combustion rate is given in correlation with non-dimensional time. Mutual factors are given in the form of polynomials with a large degree of adaption. The analysis of coal combustion in a three-dimensional space was made by the introduction of non-dimensional combustion air flow velocity. It was found that the non-dimensional combustion rate of the combustion of coal pieces does not depend on non-dimensional combustion air flow velocity or temperature. UR - https://www.sv-jme.eu/sl/article/general-model-of-the-combustion-of-a-single-coal-piece-in-tubular-device-with-controlled-air-flow/
@article{{}{.},
author = {Butala, V., Novak, P.},
title = {General Model of the Combustion of a Single Coal Piece in Tubular Device with Controlled Air Flow},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {44},
number = {3-4},
year = {1998},
doi = {},
url = {https://www.sv-jme.eu/sl/article/general-model-of-the-combustion-of-a-single-coal-piece-in-tubular-device-with-controlled-air-flow/}
}
TY - JOUR AU - Butala, Vincenc AU - Novak, Peter PY - 2017/11/11 TI - General Model of the Combustion of a Single Coal Piece in Tubular Device with Controlled Air Flow JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 44, No 3-4 (1998): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - coal combustion, combustion velocity, analysis of combustion, combustion models, N2 - The paper presents experimental research into the combustion of individual coal pieces with dimensions o f 6.5 x 4.7 x 3.8 cm and masses of 120 ± 7 g in a combustion pipe. The coal pieces were burned under known thermodynamic conditions in a convective air current, which served as an oxidant. Based on experimental data obtained from the combustion of single coal pieces, combustion rate (i.e. variation of fuel mass vs. time) was described using non-dimensional quantities. The non-dimensional combustion rate is given in correlation with non-dimensional time. Mutual factors are given in the form of polynomials with a large degree of adaption. The analysis of coal combustion in a three-dimensional space was made by the introduction of non-dimensional combustion air flow velocity. It was found that the non-dimensional combustion rate of the combustion of coal pieces does not depend on non-dimensional combustion air flow velocity or temperature. UR - https://www.sv-jme.eu/sl/article/general-model-of-the-combustion-of-a-single-coal-piece-in-tubular-device-with-controlled-air-flow/
Butala, Vincenc, AND Novak, Peter. "General Model of the Combustion of a Single Coal Piece in Tubular Device with Controlled Air Flow" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 44 Number 3-4 (11 November 2017)
Strojniški vestnik - Journal of Mechanical Engineering 44(1998)3-4, 117-128
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
The paper presents experimental research into the combustion of individual coal pieces with dimensions o f 6.5 x 4.7 x 3.8 cm and masses of 120 ± 7 g in a combustion pipe. The coal pieces were burned under known thermodynamic conditions in a convective air current, which served as an oxidant. Based on experimental data obtained from the combustion of single coal pieces, combustion rate (i.e. variation of fuel mass vs. time) was described using non-dimensional quantities. The non-dimensional combustion rate is given in correlation with non-dimensional time. Mutual factors are given in the form of polynomials with a large degree of adaption. The analysis of coal combustion in a three-dimensional space was made by the introduction of non-dimensional combustion air flow velocity. It was found that the non-dimensional combustion rate of the combustion of coal pieces does not depend on non-dimensional combustion air flow velocity or temperature.