BALASUBRAMANIAN, Muthusamy ;GANESH, Pasupathy ;RAMANATHAN, Kalimuthu ;SENTHIL KUMAR, Velukkudi Santhanam . An Experimental Investigation and Numerical Simulation in SPF of AA 5083 Alloy using Programming Logic Control Approach. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 63, n.4, p. 255-264, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/an-experimental-investigation-and-numerical-simulation-in-spf-of-aa-5083-alloy-using-programming-logic-control-approach/>. Date accessed: 20 dec. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2016.3721.
Balasubramanian, M., Ganesh, P., Ramanathan, K., & Senthil Kumar, V. (2017). An Experimental Investigation and Numerical Simulation in SPF of AA 5083 Alloy using Programming Logic Control Approach. Strojniški vestnik - Journal of Mechanical Engineering, 63(4), 255-264. doi:http://dx.doi.org/10.5545/sv-jme.2016.3721
@article{sv-jmesv-jme.2016.3721,
author = {Muthusamy Balasubramanian and Pasupathy Ganesh and Kalimuthu Ramanathan and Velukkudi Santhanam Senthil Kumar},
title = {An Experimental Investigation and Numerical Simulation in SPF of AA 5083 Alloy using Programming Logic Control Approach},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {63},
number = {4},
year = {2017},
keywords = {superplastic forming; finite element method; programming logic control circuit; aluminium 5083 alloy; multidimensional dome},
abstract = {A new programming logic control method is proposed to predict the pressure during the superplastic forming process with improved forming characteristics of AA 5083 alloy sheets. The method has produced a better uniformity thickness profile in a complex, multidimensional profile in comparison with existing methods. To optimize pressure during the forming process, it is possible to maintain an optimum strain rate. Accurate control of the magnitude and duration of forming pressure and, as a result, the achievement of uniform thickness distribution in the taper angle, die corner, entry regions, and micro-forming of the multidimensional dome has been proved in this paper. Profiles formed without significant wrinkles and necking have been obtained via the fine adjustment of the applied pressure. The experimentally obtained results, using a multidimensional dome profile, are compared with the finite element method (FEM) simulated results and both are found to be in good agreement. The influence of key factors such as strain rate sensitivity index and friction coefficient on the optimum pressure-time cycle and also on the thickness distribution of the profile have been investigated and optimized. Furthermore, the microstructure was examined in parent metal and superplastically formed components.},
issn = {0039-2480}, pages = {255-264}, doi = {10.5545/sv-jme.2016.3721},
url = {https://www.sv-jme.eu/sl/article/an-experimental-investigation-and-numerical-simulation-in-spf-of-aa-5083-alloy-using-programming-logic-control-approach/}
}
Balasubramanian, M.,Ganesh, P.,Ramanathan, K.,Senthil Kumar, V. 2017 June 63. An Experimental Investigation and Numerical Simulation in SPF of AA 5083 Alloy using Programming Logic Control Approach. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 63:4
%A Balasubramanian, Muthusamy %A Ganesh, Pasupathy %A Ramanathan, Kalimuthu %A Senthil Kumar, Velukkudi Santhanam %D 2017 %T An Experimental Investigation and Numerical Simulation in SPF of AA 5083 Alloy using Programming Logic Control Approach %B 2017 %9 superplastic forming; finite element method; programming logic control circuit; aluminium 5083 alloy; multidimensional dome %! An Experimental Investigation and Numerical Simulation in SPF of AA 5083 Alloy using Programming Logic Control Approach %K superplastic forming; finite element method; programming logic control circuit; aluminium 5083 alloy; multidimensional dome %X A new programming logic control method is proposed to predict the pressure during the superplastic forming process with improved forming characteristics of AA 5083 alloy sheets. The method has produced a better uniformity thickness profile in a complex, multidimensional profile in comparison with existing methods. To optimize pressure during the forming process, it is possible to maintain an optimum strain rate. Accurate control of the magnitude and duration of forming pressure and, as a result, the achievement of uniform thickness distribution in the taper angle, die corner, entry regions, and micro-forming of the multidimensional dome has been proved in this paper. Profiles formed without significant wrinkles and necking have been obtained via the fine adjustment of the applied pressure. The experimentally obtained results, using a multidimensional dome profile, are compared with the finite element method (FEM) simulated results and both are found to be in good agreement. The influence of key factors such as strain rate sensitivity index and friction coefficient on the optimum pressure-time cycle and also on the thickness distribution of the profile have been investigated and optimized. Furthermore, the microstructure was examined in parent metal and superplastically formed components. %U https://www.sv-jme.eu/sl/article/an-experimental-investigation-and-numerical-simulation-in-spf-of-aa-5083-alloy-using-programming-logic-control-approach/ %0 Journal Article %R 10.5545/sv-jme.2016.3721 %& 255 %P 10 %J Strojniški vestnik - Journal of Mechanical Engineering %V 63 %N 4 %@ 0039-2480 %8 2018-06-27 %7 2018-06-27
Balasubramanian, Muthusamy, Pasupathy Ganesh, Kalimuthu Ramanathan, & Velukkudi Santhanam Senthil Kumar. "An Experimental Investigation and Numerical Simulation in SPF of AA 5083 Alloy using Programming Logic Control Approach." Strojniški vestnik - Journal of Mechanical Engineering [Online], 63.4 (2017): 255-264. Web. 20 Dec. 2024
TY - JOUR AU - Balasubramanian, Muthusamy AU - Ganesh, Pasupathy AU - Ramanathan, Kalimuthu AU - Senthil Kumar, Velukkudi Santhanam PY - 2017 TI - An Experimental Investigation and Numerical Simulation in SPF of AA 5083 Alloy using Programming Logic Control Approach JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2016.3721 KW - superplastic forming; finite element method; programming logic control circuit; aluminium 5083 alloy; multidimensional dome N2 - A new programming logic control method is proposed to predict the pressure during the superplastic forming process with improved forming characteristics of AA 5083 alloy sheets. The method has produced a better uniformity thickness profile in a complex, multidimensional profile in comparison with existing methods. To optimize pressure during the forming process, it is possible to maintain an optimum strain rate. Accurate control of the magnitude and duration of forming pressure and, as a result, the achievement of uniform thickness distribution in the taper angle, die corner, entry regions, and micro-forming of the multidimensional dome has been proved in this paper. Profiles formed without significant wrinkles and necking have been obtained via the fine adjustment of the applied pressure. The experimentally obtained results, using a multidimensional dome profile, are compared with the finite element method (FEM) simulated results and both are found to be in good agreement. The influence of key factors such as strain rate sensitivity index and friction coefficient on the optimum pressure-time cycle and also on the thickness distribution of the profile have been investigated and optimized. Furthermore, the microstructure was examined in parent metal and superplastically formed components. UR - https://www.sv-jme.eu/sl/article/an-experimental-investigation-and-numerical-simulation-in-spf-of-aa-5083-alloy-using-programming-logic-control-approach/
@article{{sv-jme}{sv-jme.2016.3721},
author = {Balasubramanian, M., Ganesh, P., Ramanathan, K., Senthil Kumar, V.},
title = {An Experimental Investigation and Numerical Simulation in SPF of AA 5083 Alloy using Programming Logic Control Approach},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {63},
number = {4},
year = {2017},
doi = {10.5545/sv-jme.2016.3721},
url = {https://www.sv-jme.eu/sl/article/an-experimental-investigation-and-numerical-simulation-in-spf-of-aa-5083-alloy-using-programming-logic-control-approach/}
}
TY - JOUR AU - Balasubramanian, Muthusamy AU - Ganesh, Pasupathy AU - Ramanathan, Kalimuthu AU - Senthil Kumar, Velukkudi Santhanam PY - 2018/06/27 TI - An Experimental Investigation and Numerical Simulation in SPF of AA 5083 Alloy using Programming Logic Control Approach JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 63, No 4 (2017): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2016.3721 KW - superplastic forming, finite element method, programming logic control circuit, aluminium 5083 alloy, multidimensional dome N2 - A new programming logic control method is proposed to predict the pressure during the superplastic forming process with improved forming characteristics of AA 5083 alloy sheets. The method has produced a better uniformity thickness profile in a complex, multidimensional profile in comparison with existing methods. To optimize pressure during the forming process, it is possible to maintain an optimum strain rate. Accurate control of the magnitude and duration of forming pressure and, as a result, the achievement of uniform thickness distribution in the taper angle, die corner, entry regions, and micro-forming of the multidimensional dome has been proved in this paper. Profiles formed without significant wrinkles and necking have been obtained via the fine adjustment of the applied pressure. The experimentally obtained results, using a multidimensional dome profile, are compared with the finite element method (FEM) simulated results and both are found to be in good agreement. The influence of key factors such as strain rate sensitivity index and friction coefficient on the optimum pressure-time cycle and also on the thickness distribution of the profile have been investigated and optimized. Furthermore, the microstructure was examined in parent metal and superplastically formed components. UR - https://www.sv-jme.eu/sl/article/an-experimental-investigation-and-numerical-simulation-in-spf-of-aa-5083-alloy-using-programming-logic-control-approach/
Balasubramanian, Muthusamy, Ganesh, Pasupathy, Ramanathan, Kalimuthu, AND Senthil Kumar, Velukkudi Santhanam. "An Experimental Investigation and Numerical Simulation in SPF of AA 5083 Alloy using Programming Logic Control Approach" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 63 Number 4 (27 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 63(2017)4, 255-264
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
A new programming logic control method is proposed to predict the pressure during the superplastic forming process with improved forming characteristics of AA 5083 alloy sheets. The method has produced a better uniformity thickness profile in a complex, multidimensional profile in comparison with existing methods. To optimize pressure during the forming process, it is possible to maintain an optimum strain rate. Accurate control of the magnitude and duration of forming pressure and, as a result, the achievement of uniform thickness distribution in the taper angle, die corner, entry regions, and micro-forming of the multidimensional dome has been proved in this paper. Profiles formed without significant wrinkles and necking have been obtained via the fine adjustment of the applied pressure. The experimentally obtained results, using a multidimensional dome profile, are compared with the finite element method (FEM) simulated results and both are found to be in good agreement. The influence of key factors such as strain rate sensitivity index and friction coefficient on the optimum pressure-time cycle and also on the thickness distribution of the profile have been investigated and optimized. Furthermore, the microstructure was examined in parent metal and superplastically formed components.