PEJKOWSKI, Łukasz ;SKIBICKI, Dariusz ;SEMPRUCH, Janusz . High-Cycle Fatigue Behavior of Austenitic Steel and Pure Copper under Uniaxial, Proportional and Non-Proportional Loading. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 60, n.9, p. 549-560, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/high-cycle-fatigue-behavior-of-austenitic-steel-and-pure-copper-under-uniaxial-proportional-and-non-proportional-loading/>. Date accessed: 31 aug. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2013.1600.
Pejkowski, ., Skibicki, D., & Sempruch, J. (2014). High-Cycle Fatigue Behavior of Austenitic Steel and Pure Copper under Uniaxial, Proportional and Non-Proportional Loading. Strojniški vestnik - Journal of Mechanical Engineering, 60(9), 549-560. doi:http://dx.doi.org/10.5545/sv-jme.2013.1600
@article{sv-jmesv-jme.2013.1600, author = {Łukasz Pejkowski and Dariusz Skibicki and Janusz Sempruch}, title = {High-Cycle Fatigue Behavior of Austenitic Steel and Pure Copper under Uniaxial, Proportional and Non-Proportional Loading}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {60}, number = {9}, year = {2014}, keywords = {multiaxial fatigue, high cycle fatigue, non-proportional load, fractography, out-of-phase}, abstract = {Austenitic steel EN: X2CrNiMo17-12-2 (ASTM: 316L) and copper Cu-ETP (DIN: E-Cu58, EN: CW004A, ASTM: C11000) were subject to tension-compression, torsion and complex loads, including non-proportional loads. Non-proportionality of state of stress resulted from phase shift of value δ = 90° of load components with sine signals and variable ratio of shear to normal stress λ. On the basis of the results Wöhler’s curves were prepared presenting dependency of fatigue life to equivalent stress level. Their analysis shows that fatigue life is strictly connected with the value of coefficient λ. Existence of its critical value can also be noticed, which results in the highest fatigue life reduction. The value is different for each material. Also factographic tests were conducted showing the influence of level and type of load on fracture face.}, issn = {0039-2480}, pages = {549-560}, doi = {10.5545/sv-jme.2013.1600}, url = {https://www.sv-jme.eu/sl/article/high-cycle-fatigue-behavior-of-austenitic-steel-and-pure-copper-under-uniaxial-proportional-and-non-proportional-loading/} }
Pejkowski, .,Skibicki, D.,Sempruch, J. 2014 June 60. High-Cycle Fatigue Behavior of Austenitic Steel and Pure Copper under Uniaxial, Proportional and Non-Proportional Loading. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 60:9
%A Pejkowski, Łukasz %A Skibicki, Dariusz %A Sempruch, Janusz %D 2014 %T High-Cycle Fatigue Behavior of Austenitic Steel and Pure Copper under Uniaxial, Proportional and Non-Proportional Loading %B 2014 %9 multiaxial fatigue, high cycle fatigue, non-proportional load, fractography, out-of-phase %! High-Cycle Fatigue Behavior of Austenitic Steel and Pure Copper under Uniaxial, Proportional and Non-Proportional Loading %K multiaxial fatigue, high cycle fatigue, non-proportional load, fractography, out-of-phase %X Austenitic steel EN: X2CrNiMo17-12-2 (ASTM: 316L) and copper Cu-ETP (DIN: E-Cu58, EN: CW004A, ASTM: C11000) were subject to tension-compression, torsion and complex loads, including non-proportional loads. Non-proportionality of state of stress resulted from phase shift of value δ = 90° of load components with sine signals and variable ratio of shear to normal stress λ. On the basis of the results Wöhler’s curves were prepared presenting dependency of fatigue life to equivalent stress level. Their analysis shows that fatigue life is strictly connected with the value of coefficient λ. Existence of its critical value can also be noticed, which results in the highest fatigue life reduction. The value is different for each material. Also factographic tests were conducted showing the influence of level and type of load on fracture face. %U https://www.sv-jme.eu/sl/article/high-cycle-fatigue-behavior-of-austenitic-steel-and-pure-copper-under-uniaxial-proportional-and-non-proportional-loading/ %0 Journal Article %R 10.5545/sv-jme.2013.1600 %& 549 %P 12 %J Strojniški vestnik - Journal of Mechanical Engineering %V 60 %N 9 %@ 0039-2480 %8 2018-06-28 %7 2018-06-28
Pejkowski, Łukasz, Dariusz Skibicki, & Janusz Sempruch. "High-Cycle Fatigue Behavior of Austenitic Steel and Pure Copper under Uniaxial, Proportional and Non-Proportional Loading." Strojniški vestnik - Journal of Mechanical Engineering [Online], 60.9 (2014): 549-560. Web. 31 Aug. 2024
TY - JOUR AU - Pejkowski, Łukasz AU - Skibicki, Dariusz AU - Sempruch, Janusz PY - 2014 TI - High-Cycle Fatigue Behavior of Austenitic Steel and Pure Copper under Uniaxial, Proportional and Non-Proportional Loading JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2013.1600 KW - multiaxial fatigue, high cycle fatigue, non-proportional load, fractography, out-of-phase N2 - Austenitic steel EN: X2CrNiMo17-12-2 (ASTM: 316L) and copper Cu-ETP (DIN: E-Cu58, EN: CW004A, ASTM: C11000) were subject to tension-compression, torsion and complex loads, including non-proportional loads. Non-proportionality of state of stress resulted from phase shift of value δ = 90° of load components with sine signals and variable ratio of shear to normal stress λ. On the basis of the results Wöhler’s curves were prepared presenting dependency of fatigue life to equivalent stress level. Their analysis shows that fatigue life is strictly connected with the value of coefficient λ. Existence of its critical value can also be noticed, which results in the highest fatigue life reduction. The value is different for each material. Also factographic tests were conducted showing the influence of level and type of load on fracture face. UR - https://www.sv-jme.eu/sl/article/high-cycle-fatigue-behavior-of-austenitic-steel-and-pure-copper-under-uniaxial-proportional-and-non-proportional-loading/
@article{{sv-jme}{sv-jme.2013.1600}, author = {Pejkowski, ., Skibicki, D., Sempruch, J.}, title = {High-Cycle Fatigue Behavior of Austenitic Steel and Pure Copper under Uniaxial, Proportional and Non-Proportional Loading}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {60}, number = {9}, year = {2014}, doi = {10.5545/sv-jme.2013.1600}, url = {https://www.sv-jme.eu/sl/article/high-cycle-fatigue-behavior-of-austenitic-steel-and-pure-copper-under-uniaxial-proportional-and-non-proportional-loading/} }
TY - JOUR AU - Pejkowski, Łukasz AU - Skibicki, Dariusz AU - Sempruch, Janusz PY - 2018/06/28 TI - High-Cycle Fatigue Behavior of Austenitic Steel and Pure Copper under Uniaxial, Proportional and Non-Proportional Loading JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 60, No 9 (2014): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2013.1600 KW - multiaxial fatigue, high cycle fatigue, non-proportional load, fractography, out-of-phase N2 - Austenitic steel EN: X2CrNiMo17-12-2 (ASTM: 316L) and copper Cu-ETP (DIN: E-Cu58, EN: CW004A, ASTM: C11000) were subject to tension-compression, torsion and complex loads, including non-proportional loads. Non-proportionality of state of stress resulted from phase shift of value δ = 90° of load components with sine signals and variable ratio of shear to normal stress λ. On the basis of the results Wöhler’s curves were prepared presenting dependency of fatigue life to equivalent stress level. Their analysis shows that fatigue life is strictly connected with the value of coefficient λ. Existence of its critical value can also be noticed, which results in the highest fatigue life reduction. The value is different for each material. Also factographic tests were conducted showing the influence of level and type of load on fracture face. UR - https://www.sv-jme.eu/sl/article/high-cycle-fatigue-behavior-of-austenitic-steel-and-pure-copper-under-uniaxial-proportional-and-non-proportional-loading/
Pejkowski, Łukasz, Skibicki, Dariusz, AND Sempruch, Janusz. "High-Cycle Fatigue Behavior of Austenitic Steel and Pure Copper under Uniaxial, Proportional and Non-Proportional Loading" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 60 Number 9 (28 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 60(2014)9, 549-560
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
Austenitic steel EN: X2CrNiMo17-12-2 (ASTM: 316L) and copper Cu-ETP (DIN: E-Cu58, EN: CW004A, ASTM: C11000) were subject to tension-compression, torsion and complex loads, including non-proportional loads. Non-proportionality of state of stress resulted from phase shift of value δ = 90° of load components with sine signals and variable ratio of shear to normal stress λ. On the basis of the results Wöhler’s curves were prepared presenting dependency of fatigue life to equivalent stress level. Their analysis shows that fatigue life is strictly connected with the value of coefficient λ. Existence of its critical value can also be noticed, which results in the highest fatigue life reduction. The value is different for each material. Also factographic tests were conducted showing the influence of level and type of load on fracture face.