ŠOLC, Tomaž ;STEFANOVSKA, Aneta ;HOEY, Trevor ;MIKOŠ, Matjaž . Application of an Instrumented Tracer in an Abrasion Mill for Rock Abrasion Studies. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 58, n.4, p. 263-270, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/application-of-an-instrumented-tracer-in-an-abrasion-mill-for-rock-abrasion-studies/>. Date accessed: 01 sep. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2010.215.
Šolc, T., Stefanovska, A., Hoey, T., & Mikoš, M. (2012). Application of an Instrumented Tracer in an Abrasion Mill for Rock Abrasion Studies. Strojniški vestnik - Journal of Mechanical Engineering, 58(4), 263-270. doi:http://dx.doi.org/10.5545/sv-jme.2010.215
@article{sv-jmesv-jme.2010.215, author = {Tomaž Šolc and Aneta Stefanovska and Trevor Hoey and Matjaž Mikoš}, title = {Application of an Instrumented Tracer in an Abrasion Mill for Rock Abrasion Studies}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {58}, number = {4}, year = {2012}, keywords = {laboratory experiments; tribology; rock abrasion; instrumented tracers}, abstract = {One of research fields in studying dynamics of gravel-bed rivers is the interaction between sediment particles in motion and incision rates in rock-bottom river reaches. This natural phenomenon of rock abrasion was studied in a laboratory in a Dubree-type abrasion (tumbling) mill with the diameter of 711 mm, using different mixtures of fluvial sediments as abrasive media. A set of rock plates of different lithologies was fixed to the inside mill wall to evaluate rock abrasion by moving sediment particles. The dynamics of the abrasion process of the rock plates was studied by a spherical instrumented tracer with the diameter of 99 mm. This paper describes our solution to the problem of recognizing and differentiating between impacts of the instrumented tracer with different bodies: sediment particles, rock plates, soft lining of the mill and steel side plates of the mill. For this purpose, the signal analysis of measured 3D accelerations of the instrumented tracer gave sufficient information to recognize the tribological surrounding and sufficiently describe the intensity of the abrasion process (number and amplitudes of contact forces). An effective and computationally inexpensive algorithm for automatic impact recognition and evaluation was developed, based on time domain analysis. Furthermore, the frequency domain analysis gave a method for discriminating different signals. Both mentioned methods allow us to classify all recorded signals into groups based on similarity of measurement conditions.}, issn = {0039-2480}, pages = {263-270}, doi = {10.5545/sv-jme.2010.215}, url = {https://www.sv-jme.eu/sl/article/application-of-an-instrumented-tracer-in-an-abrasion-mill-for-rock-abrasion-studies/} }
Šolc, T.,Stefanovska, A.,Hoey, T.,Mikoš, M. 2012 June 58. Application of an Instrumented Tracer in an Abrasion Mill for Rock Abrasion Studies. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 58:4
%A Šolc, Tomaž %A Stefanovska, Aneta %A Hoey, Trevor %A Mikoš, Matjaž %D 2012 %T Application of an Instrumented Tracer in an Abrasion Mill for Rock Abrasion Studies %B 2012 %9 laboratory experiments; tribology; rock abrasion; instrumented tracers %! Application of an Instrumented Tracer in an Abrasion Mill for Rock Abrasion Studies %K laboratory experiments; tribology; rock abrasion; instrumented tracers %X One of research fields in studying dynamics of gravel-bed rivers is the interaction between sediment particles in motion and incision rates in rock-bottom river reaches. This natural phenomenon of rock abrasion was studied in a laboratory in a Dubree-type abrasion (tumbling) mill with the diameter of 711 mm, using different mixtures of fluvial sediments as abrasive media. A set of rock plates of different lithologies was fixed to the inside mill wall to evaluate rock abrasion by moving sediment particles. The dynamics of the abrasion process of the rock plates was studied by a spherical instrumented tracer with the diameter of 99 mm. This paper describes our solution to the problem of recognizing and differentiating between impacts of the instrumented tracer with different bodies: sediment particles, rock plates, soft lining of the mill and steel side plates of the mill. For this purpose, the signal analysis of measured 3D accelerations of the instrumented tracer gave sufficient information to recognize the tribological surrounding and sufficiently describe the intensity of the abrasion process (number and amplitudes of contact forces). An effective and computationally inexpensive algorithm for automatic impact recognition and evaluation was developed, based on time domain analysis. Furthermore, the frequency domain analysis gave a method for discriminating different signals. Both mentioned methods allow us to classify all recorded signals into groups based on similarity of measurement conditions. %U https://www.sv-jme.eu/sl/article/application-of-an-instrumented-tracer-in-an-abrasion-mill-for-rock-abrasion-studies/ %0 Journal Article %R 10.5545/sv-jme.2010.215 %& 263 %P 8 %J Strojniški vestnik - Journal of Mechanical Engineering %V 58 %N 4 %@ 0039-2480 %8 2018-06-28 %7 2018-06-28
Šolc, Tomaž, Aneta Stefanovska, Trevor Hoey, & Matjaž Mikoš. "Application of an Instrumented Tracer in an Abrasion Mill for Rock Abrasion Studies." Strojniški vestnik - Journal of Mechanical Engineering [Online], 58.4 (2012): 263-270. Web. 01 Sep. 2024
TY - JOUR AU - Šolc, Tomaž AU - Stefanovska, Aneta AU - Hoey, Trevor AU - Mikoš, Matjaž PY - 2012 TI - Application of an Instrumented Tracer in an Abrasion Mill for Rock Abrasion Studies JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2010.215 KW - laboratory experiments; tribology; rock abrasion; instrumented tracers N2 - One of research fields in studying dynamics of gravel-bed rivers is the interaction between sediment particles in motion and incision rates in rock-bottom river reaches. This natural phenomenon of rock abrasion was studied in a laboratory in a Dubree-type abrasion (tumbling) mill with the diameter of 711 mm, using different mixtures of fluvial sediments as abrasive media. A set of rock plates of different lithologies was fixed to the inside mill wall to evaluate rock abrasion by moving sediment particles. The dynamics of the abrasion process of the rock plates was studied by a spherical instrumented tracer with the diameter of 99 mm. This paper describes our solution to the problem of recognizing and differentiating between impacts of the instrumented tracer with different bodies: sediment particles, rock plates, soft lining of the mill and steel side plates of the mill. For this purpose, the signal analysis of measured 3D accelerations of the instrumented tracer gave sufficient information to recognize the tribological surrounding and sufficiently describe the intensity of the abrasion process (number and amplitudes of contact forces). An effective and computationally inexpensive algorithm for automatic impact recognition and evaluation was developed, based on time domain analysis. Furthermore, the frequency domain analysis gave a method for discriminating different signals. Both mentioned methods allow us to classify all recorded signals into groups based on similarity of measurement conditions. UR - https://www.sv-jme.eu/sl/article/application-of-an-instrumented-tracer-in-an-abrasion-mill-for-rock-abrasion-studies/
@article{{sv-jme}{sv-jme.2010.215}, author = {Šolc, T., Stefanovska, A., Hoey, T., Mikoš, M.}, title = {Application of an Instrumented Tracer in an Abrasion Mill for Rock Abrasion Studies}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {58}, number = {4}, year = {2012}, doi = {10.5545/sv-jme.2010.215}, url = {https://www.sv-jme.eu/sl/article/application-of-an-instrumented-tracer-in-an-abrasion-mill-for-rock-abrasion-studies/} }
TY - JOUR AU - Šolc, Tomaž AU - Stefanovska, Aneta AU - Hoey, Trevor AU - Mikoš, Matjaž PY - 2018/06/28 TI - Application of an Instrumented Tracer in an Abrasion Mill for Rock Abrasion Studies JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 58, No 4 (2012): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2010.215 KW - laboratory experiments, tribology, rock abrasion, instrumented tracers N2 - One of research fields in studying dynamics of gravel-bed rivers is the interaction between sediment particles in motion and incision rates in rock-bottom river reaches. This natural phenomenon of rock abrasion was studied in a laboratory in a Dubree-type abrasion (tumbling) mill with the diameter of 711 mm, using different mixtures of fluvial sediments as abrasive media. A set of rock plates of different lithologies was fixed to the inside mill wall to evaluate rock abrasion by moving sediment particles. The dynamics of the abrasion process of the rock plates was studied by a spherical instrumented tracer with the diameter of 99 mm. This paper describes our solution to the problem of recognizing and differentiating between impacts of the instrumented tracer with different bodies: sediment particles, rock plates, soft lining of the mill and steel side plates of the mill. For this purpose, the signal analysis of measured 3D accelerations of the instrumented tracer gave sufficient information to recognize the tribological surrounding and sufficiently describe the intensity of the abrasion process (number and amplitudes of contact forces). An effective and computationally inexpensive algorithm for automatic impact recognition and evaluation was developed, based on time domain analysis. Furthermore, the frequency domain analysis gave a method for discriminating different signals. Both mentioned methods allow us to classify all recorded signals into groups based on similarity of measurement conditions. UR - https://www.sv-jme.eu/sl/article/application-of-an-instrumented-tracer-in-an-abrasion-mill-for-rock-abrasion-studies/
Šolc, Tomaž, Stefanovska, Aneta, Hoey, Trevor, AND Mikoš, Matjaž. "Application of an Instrumented Tracer in an Abrasion Mill for Rock Abrasion Studies" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 58 Number 4 (28 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 58(2012)4, 263-270
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
One of research fields in studying dynamics of gravel-bed rivers is the interaction between sediment particles in motion and incision rates in rock-bottom river reaches. This natural phenomenon of rock abrasion was studied in a laboratory in a Dubree-type abrasion (tumbling) mill with the diameter of 711 mm, using different mixtures of fluvial sediments as abrasive media. A set of rock plates of different lithologies was fixed to the inside mill wall to evaluate rock abrasion by moving sediment particles. The dynamics of the abrasion process of the rock plates was studied by a spherical instrumented tracer with the diameter of 99 mm. This paper describes our solution to the problem of recognizing and differentiating between impacts of the instrumented tracer with different bodies: sediment particles, rock plates, soft lining of the mill and steel side plates of the mill. For this purpose, the signal analysis of measured 3D accelerations of the instrumented tracer gave sufficient information to recognize the tribological surrounding and sufficiently describe the intensity of the abrasion process (number and amplitudes of contact forces). An effective and computationally inexpensive algorithm for automatic impact recognition and evaluation was developed, based on time domain analysis. Furthermore, the frequency domain analysis gave a method for discriminating different signals. Both mentioned methods allow us to classify all recorded signals into groups based on similarity of measurement conditions.