STANIEK, Roman . Shaping of Face Toothing in Flat Spiroid Gears. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 57, n.1, p. 47-54, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/shaping-of-face-toothing-in-flat-spiroid-gears/>. Date accessed: 31 aug. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2010.093.
Staniek, R. (2011). Shaping of Face Toothing in Flat Spiroid Gears. Strojniški vestnik - Journal of Mechanical Engineering, 57(1), 47-54. doi:http://dx.doi.org/10.5545/sv-jme.2010.093
@article{sv-jmesv-jme.2010.093, author = {Roman Staniek}, title = {Shaping of Face Toothing in Flat Spiroid Gears}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {57}, number = {1}, year = {2011}, keywords = {NC rotary tables; flat spiroid gears; forming of toothings; modification}, abstract = {The paper deals with the theoretical basics of forming the face toothings in flat wheels of spiroid gears by means of a single cutting edge tool, using NC machine tools. Based on kinematics - geometrical formulas, geometrical models of creating the tooth spaces, as well as a determination of the modification depth along the tooth line, are described. Equations of the tooth line have been calculated as well as mathematical formulas enabling the determination of the modification depth, assuming the correct matching of the worm with the flat wheel of the spiroid gear. Based on geometrical models and mathematical formulas algorithms were elaborated in order to determine the envelope condition and modification depth of the tooth line. Then, on the basis of algorithms, computer programs that are going to be used to design the flat spiroid gears and to calculate their geometrical dimensions were proposed. The modification depth along the tooth line was also illustrated. The simulation results have been illustrated by the gear example. Finally, two methods of machining the face toothings in spiroid gears with a single edge-cutting tool are presented: accurate and approximate ones. Based on algorithms and programs, a comparative simulation of both methods was elaborated.}, issn = {0039-2480}, pages = {47-54}, doi = {10.5545/sv-jme.2010.093}, url = {https://www.sv-jme.eu/sl/article/shaping-of-face-toothing-in-flat-spiroid-gears/} }
Staniek, R. 2011 June 57. Shaping of Face Toothing in Flat Spiroid Gears. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 57:1
%A Staniek, Roman %D 2011 %T Shaping of Face Toothing in Flat Spiroid Gears %B 2011 %9 NC rotary tables; flat spiroid gears; forming of toothings; modification %! Shaping of Face Toothing in Flat Spiroid Gears %K NC rotary tables; flat spiroid gears; forming of toothings; modification %X The paper deals with the theoretical basics of forming the face toothings in flat wheels of spiroid gears by means of a single cutting edge tool, using NC machine tools. Based on kinematics - geometrical formulas, geometrical models of creating the tooth spaces, as well as a determination of the modification depth along the tooth line, are described. Equations of the tooth line have been calculated as well as mathematical formulas enabling the determination of the modification depth, assuming the correct matching of the worm with the flat wheel of the spiroid gear. Based on geometrical models and mathematical formulas algorithms were elaborated in order to determine the envelope condition and modification depth of the tooth line. Then, on the basis of algorithms, computer programs that are going to be used to design the flat spiroid gears and to calculate their geometrical dimensions were proposed. The modification depth along the tooth line was also illustrated. The simulation results have been illustrated by the gear example. Finally, two methods of machining the face toothings in spiroid gears with a single edge-cutting tool are presented: accurate and approximate ones. Based on algorithms and programs, a comparative simulation of both methods was elaborated. %U https://www.sv-jme.eu/sl/article/shaping-of-face-toothing-in-flat-spiroid-gears/ %0 Journal Article %R 10.5545/sv-jme.2010.093 %& 47 %P 8 %J Strojniški vestnik - Journal of Mechanical Engineering %V 57 %N 1 %@ 0039-2480 %8 2018-06-28 %7 2018-06-28
Staniek, Roman. "Shaping of Face Toothing in Flat Spiroid Gears." Strojniški vestnik - Journal of Mechanical Engineering [Online], 57.1 (2011): 47-54. Web. 31 Aug. 2024
TY - JOUR AU - Staniek, Roman PY - 2011 TI - Shaping of Face Toothing in Flat Spiroid Gears JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2010.093 KW - NC rotary tables; flat spiroid gears; forming of toothings; modification N2 - The paper deals with the theoretical basics of forming the face toothings in flat wheels of spiroid gears by means of a single cutting edge tool, using NC machine tools. Based on kinematics - geometrical formulas, geometrical models of creating the tooth spaces, as well as a determination of the modification depth along the tooth line, are described. Equations of the tooth line have been calculated as well as mathematical formulas enabling the determination of the modification depth, assuming the correct matching of the worm with the flat wheel of the spiroid gear. Based on geometrical models and mathematical formulas algorithms were elaborated in order to determine the envelope condition and modification depth of the tooth line. Then, on the basis of algorithms, computer programs that are going to be used to design the flat spiroid gears and to calculate their geometrical dimensions were proposed. The modification depth along the tooth line was also illustrated. The simulation results have been illustrated by the gear example. Finally, two methods of machining the face toothings in spiroid gears with a single edge-cutting tool are presented: accurate and approximate ones. Based on algorithms and programs, a comparative simulation of both methods was elaborated. UR - https://www.sv-jme.eu/sl/article/shaping-of-face-toothing-in-flat-spiroid-gears/
@article{{sv-jme}{sv-jme.2010.093}, author = {Staniek, R.}, title = {Shaping of Face Toothing in Flat Spiroid Gears}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {57}, number = {1}, year = {2011}, doi = {10.5545/sv-jme.2010.093}, url = {https://www.sv-jme.eu/sl/article/shaping-of-face-toothing-in-flat-spiroid-gears/} }
TY - JOUR AU - Staniek, Roman PY - 2018/06/28 TI - Shaping of Face Toothing in Flat Spiroid Gears JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 57, No 1 (2011): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2010.093 KW - NC rotary tables, flat spiroid gears, forming of toothings, modification N2 - The paper deals with the theoretical basics of forming the face toothings in flat wheels of spiroid gears by means of a single cutting edge tool, using NC machine tools. Based on kinematics - geometrical formulas, geometrical models of creating the tooth spaces, as well as a determination of the modification depth along the tooth line, are described. Equations of the tooth line have been calculated as well as mathematical formulas enabling the determination of the modification depth, assuming the correct matching of the worm with the flat wheel of the spiroid gear. Based on geometrical models and mathematical formulas algorithms were elaborated in order to determine the envelope condition and modification depth of the tooth line. Then, on the basis of algorithms, computer programs that are going to be used to design the flat spiroid gears and to calculate their geometrical dimensions were proposed. The modification depth along the tooth line was also illustrated. The simulation results have been illustrated by the gear example. Finally, two methods of machining the face toothings in spiroid gears with a single edge-cutting tool are presented: accurate and approximate ones. Based on algorithms and programs, a comparative simulation of both methods was elaborated. UR - https://www.sv-jme.eu/sl/article/shaping-of-face-toothing-in-flat-spiroid-gears/
Staniek, Roman"Shaping of Face Toothing in Flat Spiroid Gears" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 57 Number 1 (28 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 57(2011)1, 47-54
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
The paper deals with the theoretical basics of forming the face toothings in flat wheels of spiroid gears by means of a single cutting edge tool, using NC machine tools. Based on kinematics - geometrical formulas, geometrical models of creating the tooth spaces, as well as a determination of the modification depth along the tooth line, are described. Equations of the tooth line have been calculated as well as mathematical formulas enabling the determination of the modification depth, assuming the correct matching of the worm with the flat wheel of the spiroid gear. Based on geometrical models and mathematical formulas algorithms were elaborated in order to determine the envelope condition and modification depth of the tooth line. Then, on the basis of algorithms, computer programs that are going to be used to design the flat spiroid gears and to calculate their geometrical dimensions were proposed. The modification depth along the tooth line was also illustrated. The simulation results have been illustrated by the gear example. Finally, two methods of machining the face toothings in spiroid gears with a single edge-cutting tool are presented: accurate and approximate ones. Based on algorithms and programs, a comparative simulation of both methods was elaborated.