GURBUZ, Huseyin ;KURT, Abdullah ;CIFTCI, Ibrahim ;SEKER, Ulvi . The Influence of Chip Breaker Geometry on Tool Stresses in Turning. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 57, n.2, p. 91-99, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/the-influence-of-chip-breaker-geometry-on-tool-stresses-in-turning/>. Date accessed: 19 nov. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2009.191.
Gurbuz, H., Kurt, A., Ciftci, I., & Seker, U. (2011). The Influence of Chip Breaker Geometry on Tool Stresses in Turning. Strojniški vestnik - Journal of Mechanical Engineering, 57(2), 91-99. doi:http://dx.doi.org/10.5545/sv-jme.2009.191
@article{sv-jmesv-jme.2009.191,
author = {Huseyin Gurbuz and Abdullah Kurt and Ibrahim Ciftci and Ulvi Seker},
title = {The Influence of Chip Breaker Geometry on Tool Stresses in Turning},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {57},
number = {2},
year = {2011},
keywords = {metal cutting; chip breaker form; cutting forces; tool stresses; principal stresses; AISI 1050},
abstract = {In this study, the influence of different chip breaker geometries on cutting forces and tool stresses developed during turning was investigated experimentally. For this purpose, turning tests in accordance with ISO 3685 were carried out on AISI 1050 steel using uncoated and coated cemented carbide cutting tools with different chip breaker geometries. The tests were carried out at different cutting parameters. The cutting forces were measured using a Kistler 9257B type dynamometer. The effect of cutting force variation on tool stresses was analysed using finite element analysis software (ANSYS). The analyses results showed that the coated tools were subjected to higher stresses than the uncoated ones. However, the stresses on the uncoated tools were found to be higher than those on the coated tools at the heavy cutting conditions. In addition, the chip breaker geometry was also found to result in variation in the stresses acting on the tools.},
issn = {0039-2480}, pages = {91-99}, doi = {10.5545/sv-jme.2009.191},
url = {https://www.sv-jme.eu/sl/article/the-influence-of-chip-breaker-geometry-on-tool-stresses-in-turning/}
}
Gurbuz, H.,Kurt, A.,Ciftci, I.,Seker, U. 2011 June 57. The Influence of Chip Breaker Geometry on Tool Stresses in Turning. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 57:2
%A Gurbuz, Huseyin %A Kurt, Abdullah %A Ciftci, Ibrahim %A Seker, Ulvi %D 2011 %T The Influence of Chip Breaker Geometry on Tool Stresses in Turning %B 2011 %9 metal cutting; chip breaker form; cutting forces; tool stresses; principal stresses; AISI 1050 %! The Influence of Chip Breaker Geometry on Tool Stresses in Turning %K metal cutting; chip breaker form; cutting forces; tool stresses; principal stresses; AISI 1050 %X In this study, the influence of different chip breaker geometries on cutting forces and tool stresses developed during turning was investigated experimentally. For this purpose, turning tests in accordance with ISO 3685 were carried out on AISI 1050 steel using uncoated and coated cemented carbide cutting tools with different chip breaker geometries. The tests were carried out at different cutting parameters. The cutting forces were measured using a Kistler 9257B type dynamometer. The effect of cutting force variation on tool stresses was analysed using finite element analysis software (ANSYS). The analyses results showed that the coated tools were subjected to higher stresses than the uncoated ones. However, the stresses on the uncoated tools were found to be higher than those on the coated tools at the heavy cutting conditions. In addition, the chip breaker geometry was also found to result in variation in the stresses acting on the tools. %U https://www.sv-jme.eu/sl/article/the-influence-of-chip-breaker-geometry-on-tool-stresses-in-turning/ %0 Journal Article %R 10.5545/sv-jme.2009.191 %& 91 %P 9 %J Strojniški vestnik - Journal of Mechanical Engineering %V 57 %N 2 %@ 0039-2480 %8 2018-06-28 %7 2018-06-28
Gurbuz, Huseyin, Abdullah Kurt, Ibrahim Ciftci, & Ulvi Seker. "The Influence of Chip Breaker Geometry on Tool Stresses in Turning." Strojniški vestnik - Journal of Mechanical Engineering [Online], 57.2 (2011): 91-99. Web. 19 Nov. 2024
TY - JOUR AU - Gurbuz, Huseyin AU - Kurt, Abdullah AU - Ciftci, Ibrahim AU - Seker, Ulvi PY - 2011 TI - The Influence of Chip Breaker Geometry on Tool Stresses in Turning JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2009.191 KW - metal cutting; chip breaker form; cutting forces; tool stresses; principal stresses; AISI 1050 N2 - In this study, the influence of different chip breaker geometries on cutting forces and tool stresses developed during turning was investigated experimentally. For this purpose, turning tests in accordance with ISO 3685 were carried out on AISI 1050 steel using uncoated and coated cemented carbide cutting tools with different chip breaker geometries. The tests were carried out at different cutting parameters. The cutting forces were measured using a Kistler 9257B type dynamometer. The effect of cutting force variation on tool stresses was analysed using finite element analysis software (ANSYS). The analyses results showed that the coated tools were subjected to higher stresses than the uncoated ones. However, the stresses on the uncoated tools were found to be higher than those on the coated tools at the heavy cutting conditions. In addition, the chip breaker geometry was also found to result in variation in the stresses acting on the tools. UR - https://www.sv-jme.eu/sl/article/the-influence-of-chip-breaker-geometry-on-tool-stresses-in-turning/
@article{{sv-jme}{sv-jme.2009.191},
author = {Gurbuz, H., Kurt, A., Ciftci, I., Seker, U.},
title = {The Influence of Chip Breaker Geometry on Tool Stresses in Turning},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {57},
number = {2},
year = {2011},
doi = {10.5545/sv-jme.2009.191},
url = {https://www.sv-jme.eu/sl/article/the-influence-of-chip-breaker-geometry-on-tool-stresses-in-turning/}
}
TY - JOUR AU - Gurbuz, Huseyin AU - Kurt, Abdullah AU - Ciftci, Ibrahim AU - Seker, Ulvi PY - 2018/06/28 TI - The Influence of Chip Breaker Geometry on Tool Stresses in Turning JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 57, No 2 (2011): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2009.191 KW - metal cutting, chip breaker form, cutting forces, tool stresses, principal stresses, AISI 1050 N2 - In this study, the influence of different chip breaker geometries on cutting forces and tool stresses developed during turning was investigated experimentally. For this purpose, turning tests in accordance with ISO 3685 were carried out on AISI 1050 steel using uncoated and coated cemented carbide cutting tools with different chip breaker geometries. The tests were carried out at different cutting parameters. The cutting forces were measured using a Kistler 9257B type dynamometer. The effect of cutting force variation on tool stresses was analysed using finite element analysis software (ANSYS). The analyses results showed that the coated tools were subjected to higher stresses than the uncoated ones. However, the stresses on the uncoated tools were found to be higher than those on the coated tools at the heavy cutting conditions. In addition, the chip breaker geometry was also found to result in variation in the stresses acting on the tools. UR - https://www.sv-jme.eu/sl/article/the-influence-of-chip-breaker-geometry-on-tool-stresses-in-turning/
Gurbuz, Huseyin, Kurt, Abdullah, Ciftci, Ibrahim, AND Seker, Ulvi. "The Influence of Chip Breaker Geometry on Tool Stresses in Turning" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 57 Number 2 (28 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 57(2011)2, 91-99
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
In this study, the influence of different chip breaker geometries on cutting forces and tool stresses developed during turning was investigated experimentally. For this purpose, turning tests in accordance with ISO 3685 were carried out on AISI 1050 steel using uncoated and coated cemented carbide cutting tools with different chip breaker geometries. The tests were carried out at different cutting parameters. The cutting forces were measured using a Kistler 9257B type dynamometer. The effect of cutting force variation on tool stresses was analysed using finite element analysis software (ANSYS). The analyses results showed that the coated tools were subjected to higher stresses than the uncoated ones. However, the stresses on the uncoated tools were found to be higher than those on the coated tools at the heavy cutting conditions. In addition, the chip breaker geometry was also found to result in variation in the stresses acting on the tools.