Thermal Optimization and Comparison of Geometric Parameters of Rectangular and Triangular Fins with Constant Surfacing

BUNJAKU, Florent ;FILKOSKI, Risto V.;SAHITI, Naser .
Thermal Optimization and Comparison of Geometric Parameters of Rectangular and Triangular Fins with Constant Surfacing. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 63, n.7-8, p. 439-446, june 2018. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/thermal-optimization-and-comparison-of-geometric-parameters-of-rectangular-and-triangular-fins-with-constant-surfacing/>. Date accessed: 19 nov. 2024. 
doi:http://dx.doi.org/10.5545/sv-jme.2016.4276.

Bunjaku, F., Filkoski, R., & Sahiti, N.
(2017).
Thermal Optimization and Comparison of Geometric Parameters of Rectangular and Triangular Fins with Constant Surfacing.
Strojniški vestnik - Journal of Mechanical Engineering, 63(7-8), 439-446.
doi:http://dx.doi.org/10.5545/sv-jme.2016.4276

@article{sv-jmesv-jme.2016.4276,
	author = {Florent  Bunjaku and Risto V. Filkoski and Naser  Sahiti},
	title = {Thermal Optimization and Comparison of Geometric Parameters of Rectangular and Triangular Fins with Constant Surfacing},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {63},
	number = {7-8},
	year = {2017},
	keywords = {fins; heat flux; optimisation; geometrical parameters; rectangular & triangular profile; fin efficiency},
	abstract = {This paper presents an optimization model of fins of rectangular and triangular profiles, based on a constant value of the transverse cutting surface, as well as the optimization of the ratio of efficiency of both fin profiles. The optimization model is based on the analytical and numerical simulation of the heat flux through fins in order to derive relevant thermo-physical parameters of the investigated fin profiles. The optimization of both fin profiles is carried out for different fin materials based on constant heat transfer coefficient and for different fin materials based on variable heat flux. The efficiency of fins as relevant fin goodness parameter is also analysed and the optimal values of the ratio of fin efficiency of both profiles is graphically presented and the optimal value estimated. Numerical simulation of fin models is carried out by using ANSYS/Fluent software.},
	issn = {0039-2480},	pages = {439-446},	doi = {10.5545/sv-jme.2016.4276},
	url = {https://www.sv-jme.eu/article/thermal-optimization-and-comparison-of-geometric-parameters-of-rectangular-and-triangular-fins-with-constant-surfacing/}
}

Bunjaku, F.,Filkoski, R.,Sahiti, N.
2017 June 63. Thermal Optimization and Comparison of Geometric Parameters of Rectangular and Triangular Fins with Constant Surfacing. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 63:7-8

%A Bunjaku, Florent 
%A Filkoski, Risto V.
%A Sahiti, Naser 
%D 2017
%T Thermal Optimization and Comparison of Geometric Parameters of Rectangular and Triangular Fins with Constant Surfacing
%B 2017
%9 fins; heat flux; optimisation; geometrical parameters; rectangular & triangular profile; fin efficiency
%! Thermal Optimization and Comparison of Geometric Parameters of Rectangular and Triangular Fins with Constant Surfacing
%K fins; heat flux; optimisation; geometrical parameters; rectangular & triangular profile; fin efficiency
%X This paper presents an optimization model of fins of rectangular and triangular profiles, based on a constant value of the transverse cutting surface, as well as the optimization of the ratio of efficiency of both fin profiles. The optimization model is based on the analytical and numerical simulation of the heat flux through fins in order to derive relevant thermo-physical parameters of the investigated fin profiles. The optimization of both fin profiles is carried out for different fin materials based on constant heat transfer coefficient and for different fin materials based on variable heat flux. The efficiency of fins as relevant fin goodness parameter is also analysed and the optimal values of the ratio of fin efficiency of both profiles is graphically presented and the optimal value estimated. Numerical simulation of fin models is carried out by using ANSYS/Fluent software.
%U https://www.sv-jme.eu/article/thermal-optimization-and-comparison-of-geometric-parameters-of-rectangular-and-triangular-fins-with-constant-surfacing/
%0 Journal Article
%R 10.5545/sv-jme.2016.4276
%& 439
%P 8
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 63
%N 7-8
%@ 0039-2480
%8 2018-06-27
%7 2018-06-27

Bunjaku, Florent, Risto V. Filkoski, & Naser  Sahiti.
"Thermal Optimization and Comparison of Geometric Parameters of Rectangular and Triangular Fins with Constant Surfacing." Strojniški vestnik - Journal of Mechanical Engineering [Online], 63.7-8 (2017): 439-446. Web.  19 Nov. 2024

TY  - JOUR
AU  - Bunjaku, Florent 
AU  - Filkoski, Risto V.
AU  - Sahiti, Naser 
PY  - 2017
TI  - Thermal Optimization and Comparison of Geometric Parameters of Rectangular and Triangular Fins with Constant Surfacing
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2016.4276
KW  - fins; heat flux; optimisation; geometrical parameters; rectangular & triangular profile; fin efficiency
N2  - This paper presents an optimization model of fins of rectangular and triangular profiles, based on a constant value of the transverse cutting surface, as well as the optimization of the ratio of efficiency of both fin profiles. The optimization model is based on the analytical and numerical simulation of the heat flux through fins in order to derive relevant thermo-physical parameters of the investigated fin profiles. The optimization of both fin profiles is carried out for different fin materials based on constant heat transfer coefficient and for different fin materials based on variable heat flux. The efficiency of fins as relevant fin goodness parameter is also analysed and the optimal values of the ratio of fin efficiency of both profiles is graphically presented and the optimal value estimated. Numerical simulation of fin models is carried out by using ANSYS/Fluent software.
UR  - https://www.sv-jme.eu/article/thermal-optimization-and-comparison-of-geometric-parameters-of-rectangular-and-triangular-fins-with-constant-surfacing/

@article{{sv-jme}{sv-jme.2016.4276},
	author = {Bunjaku, F., Filkoski, R., Sahiti, N.},
	title = {Thermal Optimization and Comparison of Geometric Parameters of Rectangular and Triangular Fins with Constant Surfacing},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {63},
	number = {7-8},
	year = {2017},
	doi = {10.5545/sv-jme.2016.4276},
	url = {https://www.sv-jme.eu/article/thermal-optimization-and-comparison-of-geometric-parameters-of-rectangular-and-triangular-fins-with-constant-surfacing/}
}

TY  - JOUR
AU  - Bunjaku, Florent 
AU  - Filkoski, Risto V.
AU  - Sahiti, Naser 
PY  - 2018/06/27
TI  - Thermal Optimization and Comparison of Geometric Parameters of Rectangular and Triangular Fins with Constant Surfacing
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 63, No 7-8 (2017): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2016.4276
KW  - fins, heat flux, optimisation, geometrical parameters, rectangular & triangular profile, fin efficiency
N2  - This paper presents an optimization model of fins of rectangular and triangular profiles, based on a constant value of the transverse cutting surface, as well as the optimization of the ratio of efficiency of both fin profiles. The optimization model is based on the analytical and numerical simulation of the heat flux through fins in order to derive relevant thermo-physical parameters of the investigated fin profiles. The optimization of both fin profiles is carried out for different fin materials based on constant heat transfer coefficient and for different fin materials based on variable heat flux. The efficiency of fins as relevant fin goodness parameter is also analysed and the optimal values of the ratio of fin efficiency of both profiles is graphically presented and the optimal value estimated. Numerical simulation of fin models is carried out by using ANSYS/Fluent software.
UR  - https://www.sv-jme.eu/article/thermal-optimization-and-comparison-of-geometric-parameters-of-rectangular-and-triangular-fins-with-constant-surfacing/

Bunjaku, Florent, Filkoski, Risto, AND Sahiti, Naser.
"Thermal Optimization and Comparison of Geometric Parameters of Rectangular and Triangular Fins with Constant Surfacing" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 63 Number 7-8 (27 June 2018)