EKINOVIĆ, Sabahudin ;DOLINŠEK, Slavko ;KOPAČ, Janez ;GODEC, Matjaž . The Transition from the Conventional to the High-Speed Cutting Region and a Chip-Formation Analysis. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 48, n.3, p. 133-142, july 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/the-transition-from-the-conventional-to-the-high-speed-cutting-region-and-a-chip-formation-analysis/>. Date accessed: 20 dec. 2024. doi:http://dx.doi.org/.
Ekinović, S., Dolinšek, S., Kopač, J., & Godec, M. (2002). The Transition from the Conventional to the High-Speed Cutting Region and a Chip-Formation Analysis. Strojniški vestnik - Journal of Mechanical Engineering, 48(3), 133-142. doi:http://dx.doi.org/
@article{.,
author = {Sabahudin Ekinović and Slavko Dolinšek and Janez Kopač and Matjaž Godec},
title = {The Transition from the Conventional to the High-Speed Cutting Region and a Chip-Formation Analysis},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {48},
number = {3},
year = {2002},
keywords = {machine tools; high speed cutting; chip formation; cutting speeds; },
abstract = {As a result of advances in machine-tool design (main spindle, feed drives, etc.), high-speed milling has become a cost-effective manufacturing process for making products with a high surface quality, low variations of the machined surface and excellent dimensional accuracy. Taking into account the evident advantages of high-speed machining over conventional machining, a key issue is to identify those cutting speeds that correspond to high-speed machining. The simple reason for this is that machining effects increase when entering the high-speed region but, on the other hand, an enormous increase in the cutting speed is not advisible due to the appearance of higher tool wear and machine-tool energy consumption. In order to solve the problem this paper describes a procedure based on a chip-formation mechanism and a chip-shape analysis, together with the use of metallographic methods.},
issn = {0039-2480}, pages = {133-142}, doi = {},
url = {https://www.sv-jme.eu/article/the-transition-from-the-conventional-to-the-high-speed-cutting-region-and-a-chip-formation-analysis/}
}
Ekinović, S.,Dolinšek, S.,Kopač, J.,Godec, M. 2002 July 48. The Transition from the Conventional to the High-Speed Cutting Region and a Chip-Formation Analysis. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 48:3
%A Ekinović, Sabahudin %A Dolinšek, Slavko %A Kopač, Janez %A Godec, Matjaž %D 2002 %T The Transition from the Conventional to the High-Speed Cutting Region and a Chip-Formation Analysis %B 2002 %9 machine tools; high speed cutting; chip formation; cutting speeds; %! The Transition from the Conventional to the High-Speed Cutting Region and a Chip-Formation Analysis %K machine tools; high speed cutting; chip formation; cutting speeds; %X As a result of advances in machine-tool design (main spindle, feed drives, etc.), high-speed milling has become a cost-effective manufacturing process for making products with a high surface quality, low variations of the machined surface and excellent dimensional accuracy. Taking into account the evident advantages of high-speed machining over conventional machining, a key issue is to identify those cutting speeds that correspond to high-speed machining. The simple reason for this is that machining effects increase when entering the high-speed region but, on the other hand, an enormous increase in the cutting speed is not advisible due to the appearance of higher tool wear and machine-tool energy consumption. In order to solve the problem this paper describes a procedure based on a chip-formation mechanism and a chip-shape analysis, together with the use of metallographic methods. %U https://www.sv-jme.eu/article/the-transition-from-the-conventional-to-the-high-speed-cutting-region-and-a-chip-formation-analysis/ %0 Journal Article %R %& 133 %P 10 %J Strojniški vestnik - Journal of Mechanical Engineering %V 48 %N 3 %@ 0039-2480 %8 2017-07-07 %7 2017-07-07
Ekinović, Sabahudin, Slavko Dolinšek, Janez Kopač, & Matjaž Godec. "The Transition from the Conventional to the High-Speed Cutting Region and a Chip-Formation Analysis." Strojniški vestnik - Journal of Mechanical Engineering [Online], 48.3 (2002): 133-142. Web. 20 Dec. 2024
TY - JOUR AU - Ekinović, Sabahudin AU - Dolinšek, Slavko AU - Kopač, Janez AU - Godec, Matjaž PY - 2002 TI - The Transition from the Conventional to the High-Speed Cutting Region and a Chip-Formation Analysis JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - machine tools; high speed cutting; chip formation; cutting speeds; N2 - As a result of advances in machine-tool design (main spindle, feed drives, etc.), high-speed milling has become a cost-effective manufacturing process for making products with a high surface quality, low variations of the machined surface and excellent dimensional accuracy. Taking into account the evident advantages of high-speed machining over conventional machining, a key issue is to identify those cutting speeds that correspond to high-speed machining. The simple reason for this is that machining effects increase when entering the high-speed region but, on the other hand, an enormous increase in the cutting speed is not advisible due to the appearance of higher tool wear and machine-tool energy consumption. In order to solve the problem this paper describes a procedure based on a chip-formation mechanism and a chip-shape analysis, together with the use of metallographic methods. UR - https://www.sv-jme.eu/article/the-transition-from-the-conventional-to-the-high-speed-cutting-region-and-a-chip-formation-analysis/
@article{{}{.},
author = {Ekinović, S., Dolinšek, S., Kopač, J., Godec, M.},
title = {The Transition from the Conventional to the High-Speed Cutting Region and a Chip-Formation Analysis},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {48},
number = {3},
year = {2002},
doi = {},
url = {https://www.sv-jme.eu/article/the-transition-from-the-conventional-to-the-high-speed-cutting-region-and-a-chip-formation-analysis/}
}
TY - JOUR AU - Ekinović, Sabahudin AU - Dolinšek, Slavko AU - Kopač, Janez AU - Godec, Matjaž PY - 2017/07/07 TI - The Transition from the Conventional to the High-Speed Cutting Region and a Chip-Formation Analysis JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 48, No 3 (2002): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - machine tools, high speed cutting, chip formation, cutting speeds, N2 - As a result of advances in machine-tool design (main spindle, feed drives, etc.), high-speed milling has become a cost-effective manufacturing process for making products with a high surface quality, low variations of the machined surface and excellent dimensional accuracy. Taking into account the evident advantages of high-speed machining over conventional machining, a key issue is to identify those cutting speeds that correspond to high-speed machining. The simple reason for this is that machining effects increase when entering the high-speed region but, on the other hand, an enormous increase in the cutting speed is not advisible due to the appearance of higher tool wear and machine-tool energy consumption. In order to solve the problem this paper describes a procedure based on a chip-formation mechanism and a chip-shape analysis, together with the use of metallographic methods. UR - https://www.sv-jme.eu/article/the-transition-from-the-conventional-to-the-high-speed-cutting-region-and-a-chip-formation-analysis/
Ekinović, Sabahudin, Dolinšek, Slavko, Kopač, Janez, AND Godec, Matjaž. "The Transition from the Conventional to the High-Speed Cutting Region and a Chip-Formation Analysis" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 48 Number 3 (07 July 2017)
Strojniški vestnik - Journal of Mechanical Engineering 48(2002)3, 133-142
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
As a result of advances in machine-tool design (main spindle, feed drives, etc.), high-speed milling has become a cost-effective manufacturing process for making products with a high surface quality, low variations of the machined surface and excellent dimensional accuracy. Taking into account the evident advantages of high-speed machining over conventional machining, a key issue is to identify those cutting speeds that correspond to high-speed machining. The simple reason for this is that machining effects increase when entering the high-speed region but, on the other hand, an enormous increase in the cutting speed is not advisible due to the appearance of higher tool wear and machine-tool energy consumption. In order to solve the problem this paper describes a procedure based on a chip-formation mechanism and a chip-shape analysis, together with the use of metallographic methods.