Structure Formation of Hypereutectic Al-Si-Alloys Produced by Laser Surface Treatment

GRIGORIEV, Sergey Nikolaevich;TARASOVA, Tatyana Vasilievna;GVOZDEVA, Galina Olegovna;NOWOTNY, Steffen .
Structure Formation of Hypereutectic Al-Si-Alloys Produced by Laser Surface Treatment. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 60, n.6, p. 389-394, june 2018. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/structure-formation-of-hypereutectic-al-si-alloys-produced-by-laser-surface-treatment/>. Date accessed: 19 nov. 2024. 
doi:http://dx.doi.org/10.5545/sv-jme.2013.1211.

Grigoriev, S., Tarasova, T., Gvozdeva, G., & Nowotny, S.
(2014).
Structure Formation of Hypereutectic Al-Si-Alloys Produced by Laser Surface Treatment.
Strojniški vestnik - Journal of Mechanical Engineering, 60(6), 389-394.
doi:http://dx.doi.org/10.5545/sv-jme.2013.1211

@article{sv-jmesv-jme.2013.1211,
	author = {Sergey Nikolaevich Grigoriev and Tatyana Vasilievna Tarasova and Galina Olegovna Gvozdeva and Steffen  Nowotny},
	title = {Structure Formation of Hypereutectic Al-Si-Alloys Produced by Laser Surface Treatment},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {60},
	number = {6},
	year = {2014},
	keywords = {laser processing, Al-alloys, laser cladding, powder metallurgy},
	abstract = {Using a coaxial laser cladding process AlSix (X=30, 40, 60) clad tracks were produced. The mechanisms of structure formation in Al-Si alloys during laser cladding were studied. Particle size distribution, surface morphology and microstructure of the initial powders were investigated. The influence of the chemical composition of the powder material on the structure and the microhardness of the coating has been shown, as well as the influence of processing parameters on the microstructure and the geometry of the resulting tracks. Conclusions about the technological possibility of manufacturing single tracks with widths of < 500 μm based on an Al metallic matrix bearing a Si content ranging from 30 to 60 wt.% Si have been made. },
	issn = {0039-2480},	pages = {389-394},	doi = {10.5545/sv-jme.2013.1211},
	url = {https://www.sv-jme.eu/article/structure-formation-of-hypereutectic-al-si-alloys-produced-by-laser-surface-treatment/}
}

Grigoriev, S.,Tarasova, T.,Gvozdeva, G.,Nowotny, S.
2014 June 60. Structure Formation of Hypereutectic Al-Si-Alloys Produced by Laser Surface Treatment. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 60:6

%A Grigoriev, Sergey Nikolaevich
%A Tarasova, Tatyana Vasilievna
%A Gvozdeva, Galina Olegovna
%A Nowotny, Steffen 
%D 2014
%T Structure Formation of Hypereutectic Al-Si-Alloys Produced by Laser Surface Treatment
%B 2014
%9 laser processing, Al-alloys, laser cladding, powder metallurgy
%! Structure Formation of Hypereutectic Al-Si-Alloys Produced by Laser Surface Treatment
%K laser processing, Al-alloys, laser cladding, powder metallurgy
%X Using a coaxial laser cladding process AlSix (X=30, 40, 60) clad tracks were produced. The mechanisms of structure formation in Al-Si alloys during laser cladding were studied. Particle size distribution, surface morphology and microstructure of the initial powders were investigated. The influence of the chemical composition of the powder material on the structure and the microhardness of the coating has been shown, as well as the influence of processing parameters on the microstructure and the geometry of the resulting tracks. Conclusions about the technological possibility of manufacturing single tracks with widths of < 500 μm based on an Al metallic matrix bearing a Si content ranging from 30 to 60 wt.% Si have been made. 
%U https://www.sv-jme.eu/article/structure-formation-of-hypereutectic-al-si-alloys-produced-by-laser-surface-treatment/
%0 Journal Article
%R 10.5545/sv-jme.2013.1211
%& 389
%P 6
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 60
%N 6
%@ 0039-2480
%8 2018-06-28
%7 2018-06-28

Grigoriev, Sergey, Tatyana Vasilievna Tarasova, Galina Olegovna Gvozdeva, & Steffen  Nowotny.
"Structure Formation of Hypereutectic Al-Si-Alloys Produced by Laser Surface Treatment." Strojniški vestnik - Journal of Mechanical Engineering [Online], 60.6 (2014): 389-394. Web.  19 Nov. 2024

TY  - JOUR
AU  - Grigoriev, Sergey Nikolaevich
AU  - Tarasova, Tatyana Vasilievna
AU  - Gvozdeva, Galina Olegovna
AU  - Nowotny, Steffen 
PY  - 2014
TI  - Structure Formation of Hypereutectic Al-Si-Alloys Produced by Laser Surface Treatment
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2013.1211
KW  - laser processing, Al-alloys, laser cladding, powder metallurgy
N2  - Using a coaxial laser cladding process AlSix (X=30, 40, 60) clad tracks were produced. The mechanisms of structure formation in Al-Si alloys during laser cladding were studied. Particle size distribution, surface morphology and microstructure of the initial powders were investigated. The influence of the chemical composition of the powder material on the structure and the microhardness of the coating has been shown, as well as the influence of processing parameters on the microstructure and the geometry of the resulting tracks. Conclusions about the technological possibility of manufacturing single tracks with widths of < 500 μm based on an Al metallic matrix bearing a Si content ranging from 30 to 60 wt.% Si have been made. 
UR  - https://www.sv-jme.eu/article/structure-formation-of-hypereutectic-al-si-alloys-produced-by-laser-surface-treatment/

@article{{sv-jme}{sv-jme.2013.1211},
	author = {Grigoriev, S., Tarasova, T., Gvozdeva, G., Nowotny, S.},
	title = {Structure Formation of Hypereutectic Al-Si-Alloys Produced by Laser Surface Treatment},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {60},
	number = {6},
	year = {2014},
	doi = {10.5545/sv-jme.2013.1211},
	url = {https://www.sv-jme.eu/article/structure-formation-of-hypereutectic-al-si-alloys-produced-by-laser-surface-treatment/}
}

TY  - JOUR
AU  - Grigoriev, Sergey Nikolaevich
AU  - Tarasova, Tatyana Vasilievna
AU  - Gvozdeva, Galina Olegovna
AU  - Nowotny, Steffen 
PY  - 2018/06/28
TI  - Structure Formation of Hypereutectic Al-Si-Alloys Produced by Laser Surface Treatment
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 60, No 6 (2014): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2013.1211
KW  - laser processing, Al-alloys, laser cladding, powder metallurgy
N2  - Using a coaxial laser cladding process AlSix (X=30, 40, 60) clad tracks were produced. The mechanisms of structure formation in Al-Si alloys during laser cladding were studied. Particle size distribution, surface morphology and microstructure of the initial powders were investigated. The influence of the chemical composition of the powder material on the structure and the microhardness of the coating has been shown, as well as the influence of processing parameters on the microstructure and the geometry of the resulting tracks. Conclusions about the technological possibility of manufacturing single tracks with widths of < 500 μm based on an Al metallic matrix bearing a Si content ranging from 30 to 60 wt.% Si have been made. 
UR  - https://www.sv-jme.eu/article/structure-formation-of-hypereutectic-al-si-alloys-produced-by-laser-surface-treatment/

Grigoriev, Sergey, Tarasova, Tatyana, Gvozdeva, Galina, AND Nowotny, Steffen.
"Structure Formation of Hypereutectic Al-Si-Alloys Produced by Laser Surface Treatment" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 60 Number 6 (28 June 2018)